diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r-- | arch/arm/Kconfig.debug | 45 |
1 files changed, 44 insertions, 1 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0bc06ab9fb86..1c4889dbc714 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -139,6 +139,17 @@ choice Say Y here if you want kernel low-level debugging support on Marvell Berlin SoC based platforms. + config DEBUG_BRCMSTB_UART + bool "Use BRCMSTB UART for low-level debug" + depends on ARCH_BRCMSTB + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + If you have a Broadcom STB chip and would like early print + messages to appear over the UART, select this option. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -723,6 +734,14 @@ choice their output to UART 2. The port must have been initialised by the boot-loader before use. + config DEBUG_SA1100 + depends on ARCH_SA1100 + bool "Use SA1100 UARTs for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on SA-11x0 UART ports. The kernel will check for the first + enabled UART in a sequence 3-1-2. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -874,6 +893,22 @@ choice Say Y here if you want kernel low-level debugging support for Mediatek mt6589 based platforms on UART0. + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1049,6 +1084,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string + default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO @@ -1122,7 +1158,9 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 + default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1162,6 +1200,7 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART default 0xf0000be0 if ARCH_EBSA110 + default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X @@ -1190,7 +1229,9 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 + default 0xf1009000 if DEBUG_MT8135_UART3 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1214,6 +1255,7 @@ config DEBUG_UART_VIRT default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1270,7 +1312,8 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ + DEBUG_BRCMSTB_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" |