diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r-- | arch/arm/Kconfig.debug | 476 |
1 files changed, 206 insertions, 270 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8bcbd0cd739b..5fbbac1b708b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -9,7 +9,7 @@ config ARM_PTDUMP_DEBUGFS depends on MMU select ARM_PTDUMP_CORE select DEBUG_FS - ---help--- + help Say Y here if you want to show the kernel pagetable layout in a debugfs file. This information is only useful for kernel developers who are working in architecture specific areas of the kernel. @@ -21,7 +21,7 @@ config DEBUG_WX bool "Warn on W+X mappings at boot" depends on MMU select ARM_PTDUMP_CORE - ---help--- + help Generate a warning if any W+X mappings are found at boot. This is useful for discovering cases where the kernel is leaving @@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER config UNWINDER_ARM bool "ARM EABI stack unwinder" - depends on AEABI && !FUNCTION_GRAPH_TRACER + depends on AEABI select ARM_UNWIND help This option enables stack unwinding support in the kernel @@ -79,6 +79,17 @@ endchoice config ARM_UNWIND bool +config BACKTRACE_VERBOSE + bool "Verbose backtrace" + depends on EXPERT + help + When the kernel produces a warning or oops, the kernel prints a + trace of the call chain. This option controls whether we include + the numeric addresses or only include the symbolic information. + + In most cases, say N here, unless you are intending to debug the + kernel and have access to the kernel binary image. + config FRAME_POINTER bool @@ -147,14 +158,14 @@ choice 0x80024000 | 0xf0024000 | UART9 config DEBUG_AT91_RM9200_DBGU - bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU" + bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU" select DEBUG_AT91_UART - depends on SOC_AT91RM9200 || SOC_AT91SAM9 + depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 help Say Y here if you want kernel low-level debugging support on the DBGU port of: at91rm9200, at91sam9260, at91sam9g20, at91sam9261, - at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5 + at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60 config DEBUG_AT91_SAM9263_DBGU bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU" @@ -191,6 +202,34 @@ choice their output to the USART1 port on SAMV7 based machines. + config DEBUG_AT91_SAMA7G5_FLEXCOM3 + bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" + select DEBUG_AT91_UART + depends on SOC_SAMA7G5 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM3 port of SAMA7G5. + + config DEBUG_AT91_LAN966_FLEXCOM + bool "Kernel low-level debugging on LAN966 FLEXCOM USART" + select DEBUG_AT91_UART + depends on SOC_LAN966 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM port of LAN966. + + DEBUG_UART_PHYS | DEBUG_UART_VIRT + + 0xe0040200 | 0xfd040200 | FLEXCOM0 + 0xe0044200 | 0xfd044200 | FLEXCOM1 + 0xe0060200 | 0xfd060200 | FLEXCOM2 + 0xe0064200 | 0xfd064200 | FLEXCOM3 + 0xe0070200 | 0xfd070200 | FLEXCOM4 + + By default, enabling FLEXCOM3 port. Based on requirement, use + DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above + table. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -232,7 +271,7 @@ choice config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" - depends on ARCH_BCM_63XX + depends on ARCH_BCMBCA config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" @@ -268,14 +307,6 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. - config DEBUG_CNS3XXX - bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" - depends on ARCH_CNS3XXX - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to the CNS3xxx UART0. - config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -292,14 +323,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART2 serial port on DaVinci DA8XX devices. - config DEBUG_DAVINCI_DMx_UART0 - bool "Kernel low-level debugging on DaVinci DMx using UART0" - depends on ARCH_DAVINCI_DMx - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -400,12 +423,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX25. - config DEBUG_IMX21_IMX27_UART - bool "i.MX21 and i.MX27 Debug UART" - depends on SOC_IMX21 || SOC_IMX27 + config DEBUG_IMX27_UART + bool "i.MX27 Debug UART" + depends on SOC_IMX27 help Say Y here if you want kernel low-level debugging support - on i.MX21 or i.MX27. + on i.MX27. config DEBUG_IMX28_UART bool "i.MX28 Debug UART" @@ -607,6 +630,14 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_MSTARV7_PMUART + bool "Kernel low-level debugging messages via MSTARV7 PM UART" + depends on ARCH_MSTARV7 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for MSTAR ARMv7-based platforms on PM UART. + config DEBUG_MT6589_UART0 bool "Mediatek mt6589 UART0" depends on ARCH_MEDIATEK @@ -721,30 +752,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_UART_8250 - config DEBUG_OMAP7XXUART1 - bool "Kernel low-level debugging via OMAP730 UART1" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART1. - - config DEBUG_OMAP7XXUART2 - bool "Kernel low-level debugging via OMAP730 UART2" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART2. - - config DEBUG_OMAP7XXUART3 - bool "Kernel low-level debugging via OMAP730 UART3" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART3. - config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS @@ -770,14 +777,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART - config DEBUG_PICOXCELL_UART - depends on ARCH_PICOXCELL - bool "Use PicoXcell UART for low-level debug" - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on PicoXcell based platforms. - config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" @@ -976,6 +975,13 @@ choice Say Y here if you want kernel low-level debugging support via SCIF4 on Renesas RZ/G1E (R8A7745). + config DEBUG_RCAR_GEN2_SCIFA2 + bool "Kernel low-level debugging messages via SCIFA2 on R8A7742" + depends on ARCH_R8A7742 + help + Say Y here if you want kernel low-level debugging support + via SCIFA2 on Renesas RZ/G1H (R8A7742). + config DEBUG_RMOBILE_SCIFA0 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" depends on ARCH_R8A73A4 @@ -998,9 +1004,8 @@ choice via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" @@ -1010,9 +1015,8 @@ choice by the boot-loader before use. config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" @@ -1022,9 +1026,8 @@ choice by the boot-loader before use. config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS select DEBUG_EXYNOS_UART if ARCH_EXYNOS - select DEBUG_S3C24XX_UART if ARCH_S3C24XX select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" @@ -1034,7 +1037,7 @@ choice by the boot-loader before use. config DEBUG_S3C_UART3 - depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) + depends on ARCH_EXYNOS || ARCH_S5PV210 select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 @@ -1044,33 +1047,6 @@ choice their output to UART 3. The port must have been initialised by the boot-loader before use. - config DEBUG_S3C2410_UART0 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 0 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART1 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 1 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. - - config DEBUG_S3C2410_UART2 - depends on ARCH_S3C24XX - select DEBUG_S3C2410_UART - bool "Use S3C2410/S3C2412 UART 2 for low-level debug" - help - Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. - config DEBUG_SA1100 depends on ARCH_SA1100 bool "Use SA1100 UARTs for low-level debug" @@ -1079,8 +1055,16 @@ choice on SA-11x0 UART ports. The kernel will check for the first enabled UART in a sequence 3-1-2. + config DEBUG_SD5203_UART + bool "Hisilicon SD5203 Debug UART" + depends on ARCH_SD5203 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SD5203 UART. + config DEBUG_SOCFPGA_UART0 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA UART0 for low-level debug" select DEBUG_UART_8250 help @@ -1088,7 +1072,7 @@ choice on SOCFPGA(Cyclone 5 and Arria 5) based platforms. config DEBUG_SOCFPGA_ARRIA10_UART1 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA Arria10 UART1 for low-level debug" select DEBUG_UART_8250 help @@ -1096,7 +1080,7 @@ choice on SOCFPGA(Arria 10) based platforms. config DEBUG_SOCFPGA_CYCLONE5_UART1 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" select DEBUG_UART_8250 help @@ -1135,32 +1119,6 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - config DEBUG_SPEAR3XX bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1177,10 +1135,9 @@ choice Say Y here if you want kernel low-level debugging support on ST SPEAr13xx based platforms. - config STIH41X_DEBUG_ASC2 + config DEBUG_STIH41X_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2000, which has @@ -1188,10 +1145,9 @@ choice If unsure, say N. - config STIH41X_DEBUG_SBC_ASC1 + config DEBUG_STIH41X_SBC_ASC1 bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2020. which has @@ -1199,25 +1155,61 @@ choice If unsure, say N. + config DEBUG_STIH418_SBC_ASC0 + bool "Use StiH418 SBC ASC0 UART for low-level debug" + depends on ARCH_STI + help + Say Y here if you want kernel low-level debugging support + on STiH418 based platforms which has default UART wired + up to SBC ASC0. + + If unsure, say N. + config STM32F4_DEBUG_UART bool "Use STM32F4 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F429 || MACH_STM32F469 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F4 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. If unsure, say N. config STM32F7_DEBUG_UART bool "Use STM32F7 UART for low-level debug" - depends on ARCH_STM32 + depends on MACH_STM32F746 || MACH_STM32F769 select DEBUG_STM32_UART help Say Y here if you want kernel low-level debugging support on STM32F7 based platforms, which default UART is wired on - USART1. + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32H7_DEBUG_UART + bool "Use STM32H7 UART for low-level debug" + depends on MACH_STM32H743 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support + on STM32H7 based platforms, which default UART is wired on + USART1, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS. + + If unsure, say N. + + config STM32MP1_DEBUG_UART + bool "Use STM32MP1 UART for low-level debug" + depends on MACH_STM32MP157 + select DEBUG_STM32_UART + help + Say Y here if you want kernel low-level debugging support on + STM32MP1-based platforms, where the default UART is wired to + UART4, but another UART instance can be selected by modifying + CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. If unsure, say N. @@ -1273,14 +1265,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_U300_UART - bool "Kernel low-level debugging messages via U300 UART0" - depends on ARCH_U300 - select DEBUG_UART_PL01X - help - Say Y here if you want the debug print routines to direct - their output to the uart port on U300 devices. - config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -1346,18 +1330,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1415,20 +1387,6 @@ choice options; the platform specific options are deprecated and will be soon removed. - config DEBUG_LL_UART_EFM32 - bool "Kernel low-level debugging via efm32 UART" - depends on ARCH_EFM32 - help - Say Y here if you want the debug print routines to direct - their output to an UART or USART port on efm32 based - machines. Use the following addresses for DEBUG_UART_PHYS: - - 0x4000c000 | USART0 - 0x4000c400 | USART1 - 0x4000c800 | USART2 - 0x4000e000 | UART0 - 0x4000e400 | UART1 - config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -1451,19 +1409,21 @@ config DEBUG_AT91_UART config DEBUG_EXYNOS_UART bool -config DEBUG_S3C2410_UART - bool - select DEBUG_S3C24XX_UART - -config DEBUG_S3C24XX_UART - bool - config DEBUG_S3C64XX_UART bool config DEBUG_S5PV210_UART bool +config DEBUG_S3C_UART + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ + DEBUG_EXYNOS_UART + int + default "0" if DEBUG_S3C_UART0 + default "1" if DEBUG_S3C_UART1 + default "2" if DEBUG_S3C_UART2 + default "3" if DEBUG_S3C_UART3 + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -1472,7 +1432,7 @@ config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" depends on DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ - DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX50_UART || \ @@ -1501,17 +1461,20 @@ config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA -config DEBUG_STI_UART - bool - depends on ARCH_STI - config DEBUG_STM32_UART bool depends on ARCH_STM32 -config DEBUG_SIRFSOC_UART - bool - depends on ARCH_SIRF +config DEBUG_UART_FLOW_CONTROL + bool "Enable flow control (CTS) for the debug UART" + depends on DEBUG_LL + default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC + help + Some UART ports are connected to terminals that will use modem + control signals to indicate whether they are ready to receive text. + In practice this means that the terminal is asserting the special + control signal CTS (Clear To Send). If your debug UART supports + this and your debug terminal will require it, enable this option. config DEBUG_LL_INCLUDE string @@ -1525,16 +1488,15 @@ config DEBUG_LL_INCLUDE default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART - default "debug/efm32.S" if DEBUG_LL_UART_EFM32 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ - DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ DEBUG_IMX50_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX53_UART ||\ + DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART || \ @@ -1551,13 +1513,15 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 + default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFSOC_UART - default "debug/sti.S" if DEBUG_STI_UART + default "debug/sti.S" if DEBUG_STIH41X_ASC2 + default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 + default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0 default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART @@ -1576,11 +1540,10 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC + def_bool ARCH_IXP4XX || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" - default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 @@ -1590,7 +1553,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX + default 0x09530000 if DEBUG_STIH418_SBC_ASC0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1605,12 +1568,12 @@ config DEBUG_UART_PHYS default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if DEBUG_INTEGRATOR + default 0x1600d000 if DEBUG_SD5203_UART default 0x18000300 if DEBUG_BCM_5301X default 0x18000400 if DEBUG_BCM_HR2 - default 0x18010000 if DEBUG_SIRFATLAS7_UART0 - default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x1f221000 if DEBUG_MSTARV7_PMUART default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 @@ -1618,7 +1581,9 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x3f201000 if DEBUG_BCM2836 - default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40010000 if STM32MP1_DEBUG_UART + default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ + STM32H7_DEBUG_UART default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if DEBUG_LPC32XX @@ -1628,20 +1593,11 @@ config DEBUG_UART_PHYS default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 default 0x48022000 if DEBUG_TI81XXUART2 default 0x48024000 if DEBUG_TI81XXUART3 - default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ - DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 - default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ - DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0x4806a000 if DEBUG_OMAP2UART1 + default 0x4806c000 if DEBUG_OMAP2UART2 default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0x49020000 if DEBUG_OMAP3UART3 default 0x49042000 if DEBUG_OMAP3UART4 - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) - default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 @@ -1650,12 +1606,9 @@ config DEBUG_UART_PHYS default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX - default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if DEBUG_SPEAR3XX @@ -1664,9 +1617,12 @@ config DEBUG_UART_PHYS default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if DEBUG_SPEAR13XX + default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM + default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 + default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2 default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 @@ -1675,7 +1631,6 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 default 0xe8009000 if DEBUG_R7S9210_SCIF4 default 0xf0000000 if DEBUG_DIGICOLOR_UA0 - default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1685,7 +1640,8 @@ config DEBUG_UART_PHYS default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfcb00000 if DEBUG_HI3620_UART default 0xfd883000 if DEBUG_ALPINE_UART0 - default 0xfe800000 if ARCH_IOP32X + default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 + default 0xfed32000 if DEBUG_STIH41X_ASC2 default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART0 default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 @@ -1693,27 +1649,29 @@ config DEBUG_UART_PHYS default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART - default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xfffb0000 if DEBUG_OMAP1UART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU default 0xfffff200 if DEBUG_AT91_RM9200_DBGU depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ + DEBUG_RCAR_GEN2_SCIFA2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ + DEBUG_RMOBILE_SCIFA4 || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1721,11 +1679,12 @@ config DEBUG_UART_VIRT default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 default 0xe0010fe0 if ARCH_RPC - default 0xf0000be0 if ARCH_EBSA110 + default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 + default 0xf0221000 if DEBUG_MSTARV7_PMUART default 0xf1000300 if DEBUG_BCM_5301X default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 @@ -1743,15 +1702,9 @@ config DEBUG_UART_VIRT default 0xf6200000 if DEBUG_PXA_UART1 default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ - DEBUG_S3C2410_UART0) default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ - DEBUG_S3C2410_UART1) - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ - DEBUG_S3C2410_UART2) default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART @@ -1759,32 +1712,31 @@ config DEBUG_UART_VIRT default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU + default 0xf9530000 if DEBUG_STIH418_SBC_ASC0 default 0xf9e09000 if DEBUG_AM33XXUART1 default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 default 0xfa022000 if DEBUG_TI81XXUART2 default 0xfa024000 if DEBUG_TI81XXUART3 - default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ - DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 - default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ - DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 + default 0xfa06a000 if DEBUG_OMAP2UART1 + default 0xfa06c000 if DEBUG_OMAP2UART2 default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 default 0xfa71e000 if DEBUG_QCOM_UARTDM - default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfb020000 if DEBUG_OMAP3UART3 default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX + default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM + default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfd883000 if DEBUG_ALPINE_UART0 + default 0xfdd32000 if DEBUG_STIH41X_ASC2 + default 0xfe010000 if STM32MP1_DEBUG_UART default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART - default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 @@ -1795,55 +1747,51 @@ config DEBUG_UART_VIRT default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 - default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 - default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 - default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 - default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if DEBUG_EP93XX default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN - default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN + default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART - default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xff003000 if DEBUG_U300_UART + default 0xff0b0000 if DEBUG_OMAP1UART1 + default 0xff0b0800 if DEBUG_OMAP1UART2 + default 0xff0b9800 if DEBUG_OMAP1UART3 default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_QCOM_UARTDM || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ - DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ - DEBUG_OMAP7XXUART3 + default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \ + DEBUG_BCM_HR2 + default 3 if DEBUG_MSTARV7_PMUART default 2 config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || \ - DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ + default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ - DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \ + DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP bool "8250 UART is Palmchip BK-310x" @@ -1853,33 +1801,21 @@ config DEBUG_UART_8250_PALMCHIP except for having a different register layout. Say Y here if the debug UART is of this type. -config DEBUG_UART_8250_FLOW_CONTROL - bool "Enable flow control for 8250 UART" - depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC - config DEBUG_UNCOMPRESS bool "Enable decompressor debugging via DEBUG_LL output" - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M + depends on !ARCH_MULTIPLATFORM + depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ - !DEBUG_BRCMSTB_UART + !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING help - This option influences the normal decompressor output for - multiplatform kernels. Normally, multiplatform kernels disable - decompressor output because it is not possible to know where to - send the decompressor output. - - When this option is set, the selected DEBUG_LL output method - will be re-used for normal decompressor output on multiplatform - kernels. - + Say Y here to enable debug output in the decompressor code, using + the selected DEBUG_LL output method. config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARM_SINGLE_ARMV7M - default "mach/uncompress.h" + default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 + default "debug/uncompress.h" config EARLY_PRINTK bool "Early printk" |