diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 86 |
1 files changed, 6 insertions, 80 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 77f9f8eac162..771d5185a397 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -456,25 +456,6 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART - bool "Kernel low-level debugging messages via MSM UART" - depends on ARCH_MSM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # - MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 - MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 - MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - - MSM7X30 0xaca00000 0xe1000000 UART1 - MSM7X30 0xacb00000 0xe1000000 UART2 - MSM7X30 0xacc00000 0xe1000000 UART3 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_QCOM_UARTDM bool "Kernel low-level debugging messages via QCOM UARTDM" depends on ARCH_QCOM @@ -814,7 +795,7 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793" depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support @@ -1303,7 +1284,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART default "debug/ks8695.S" if DEBUG_KS8695_UART - default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM + default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 @@ -1396,7 +1377,6 @@ config DEBUG_UART_PHYS default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xa9a00000 if DEBUG_MSM_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART @@ -1442,7 +1422,7 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ @@ -1455,7 +1435,6 @@ config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC - default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1536,7 +1515,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 @@ -1566,7 +1545,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1620,59 +1599,6 @@ config DEBUG_SET_MODULE_RONX against certain classes of kernel exploits. If in doubt, say "N". -menuconfig CORESIGHT - bool "CoreSight Tracing Support" - select ARM_AMBA - help - This framework provides a kernel interface for the CoreSight debug - and trace drivers to register themselves with. It's intended to build - a topological view of the CoreSight components based on a DT - specification and configure the right serie of components when a - trace source gets enabled. - -if CORESIGHT -config CORESIGHT_LINKS_AND_SINKS - bool "CoreSight Link and Sink drivers" - help - This enables support for CoreSight link and sink drivers that are - responsible for transporting and collecting the trace data - respectively. Link and sinks are dynamically aggregated with a trace - entity at run time to form a complete trace path. - -config CORESIGHT_LINK_AND_SINK_TMC - bool "Coresight generic TMC driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Memory Controller driver. Depending - on its configuration the device can act as a link (embedded trace router - - ETR) or sink (embedded trace FIFO). The driver complies with the - generic implementation of the component without special enhancement or - added features. - -config CORESIGHT_SINK_TPIU - bool "Coresight generic TPIU driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Trace Port Interface Unit driver, responsible - for bridging the gap between the on-chip coresight components and a trace - port collection engine, typically connected to an external host for use - case capturing more traces than the on-board coresight memory can handle. - -config CORESIGHT_SINK_ETBV10 - bool "Coresight ETBv1.0 driver" - depends on CORESIGHT_LINKS_AND_SINKS - help - This enables support for the Embedded Trace Buffer version 1.0 driver - that complies with the generic implementation of the component without - special enhancement or added features. +source "drivers/hwtracing/coresight/Kconfig" -config CORESIGHT_SOURCE_ETM3X - bool "CoreSight Embedded Trace Macrocell 3.x driver" - select CORESIGHT_LINKS_AND_SINKS - help - This driver provides support for processor ETM3.x and PTM1.x modules, - which allows tracing the instructions that a processor is executing - This is primarily useful for instruction level tracing. Depending - the ETM version data tracing may also be available. -endif endmenu |