diff options
Diffstat (limited to 'arch/arm/boot/dts/am33xx.dtsi')
-rw-r--r-- | arch/arm/boot/dts/am33xx.dtsi | 490 |
1 files changed, 0 insertions, 490 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi deleted file mode 100644 index 646f11430dad..000000000000 --- a/arch/arm/boot/dts/am33xx.dtsi +++ /dev/null @@ -1,490 +0,0 @@ -/* - * Device Tree Source for AM33XX SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <dt-bindings/bus/ti-sysc.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/am33xx.h> -#include <dt-bindings/clock/am3.h> - -/ { - compatible = "ti,am33xx"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - d-can0 = &dcan0; - d-can1 = &dcan1; - usb0 = &usb0; - usb1 = &usb1; - phy0 = &usb0_phy; - phy1 = &usb1_phy; - ethernet0 = &cpsw_emac0; - ethernet1 = &cpsw_emac1; - spi0 = &spi0; - spi1 = &spi1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - }; - - cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because the can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; - }; - - pmu@4b000000 { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - reg = <0x4b000000 0x1000000>; - ti,hwmods = "debugss"; - }; - - /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap3-mpu"; - ti,hwmods = "mpu"; - pm-sram = <&pm_sram_code - &pm_sram_data>; - }; - }; - - /* - * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex. Since - * it will not bring real advantage to represent that in DT - * for the moment, just use a fake OCP bus entry to represent - * the whole bus hierarchy. - */ - ocp { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "l3_main"; - - l4_wkup: interconnect@44c00000 { - wkup_m3: wkup_m3@100000 { - compatible = "ti,am3352-wkup-m3"; - reg = <0x100000 0x4000>, - <0x180000 0x2000>; - reg-names = "umem", "dmem"; - ti,hwmods = "wkup_m3"; - ti,pm-firmware = "am335x-pm-firmware.elf"; - }; - }; - l4_per: interconnect@48000000 { - }; - l4_fw: interconnect@47c00000 { - }; - l4_fast: interconnect@4a000000 { - }; - l4_mpuss: interconnect@4b140000 { - }; - - intc: interrupt-controller@48200000 { - compatible = "ti,am33xx-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x48200000 0x1000>; - }; - - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <20 21>; - }; - - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; - }; - - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; - }; - - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; - }; - - target-module@47810000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - reg = <0x478102fc 0x4>, - <0x47810110 0x4>, - <0x47810114 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | - SYSC_OMAP2_ENAWAKEUP | - SYSC_OMAP2_SOFTRESET | - SYSC_OMAP2_AUTOIDLE)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,syss-mask = <1>; - clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x47810000 0x1000>; - - mmc3: mmc@0 { - compatible = "ti,omap4-hsmmc"; - ti,needs-special-reset; - interrupts = <29>; - reg = <0x0 0x1000>; - }; - }; - - usb: target-module@47400000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x47400000 0x4>, - <0x47400010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | - SYSC_OMAP2_SOFTRESET)>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x47400000 0x5000>; - - usb0_phy: usb-phy@1300 { - compatible = "ti,am335x-usb-phy"; - reg = <0x1300 0x100>; - reg-names = "phy"; - ti,ctrl_mod = <&usb_ctrl_mod>; - #phy-cells = <0>; - }; - - usb0: usb@1400 { - compatible = "ti,musb-am33xx"; - reg = <0x1400 0x400>, - <0x1000 0x200>; - reg-names = "mc", "control"; - - interrupts = <18>; - interrupt-names = "mc"; - dr_mode = "otg"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - phys = <&usb0_phy>; - - dmas = <&cppi41dma 0 0 &cppi41dma 1 0 - &cppi41dma 2 0 &cppi41dma 3 0 - &cppi41dma 4 0 &cppi41dma 5 0 - &cppi41dma 6 0 &cppi41dma 7 0 - &cppi41dma 8 0 &cppi41dma 9 0 - &cppi41dma 10 0 &cppi41dma 11 0 - &cppi41dma 12 0 &cppi41dma 13 0 - &cppi41dma 14 0 &cppi41dma 0 1 - &cppi41dma 1 1 &cppi41dma 2 1 - &cppi41dma 3 1 &cppi41dma 4 1 - &cppi41dma 5 1 &cppi41dma 6 1 - &cppi41dma 7 1 &cppi41dma 8 1 - &cppi41dma 9 1 &cppi41dma 10 1 - &cppi41dma 11 1 &cppi41dma 12 1 - &cppi41dma 13 1 &cppi41dma 14 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - usb1_phy: usb-phy@1b00 { - compatible = "ti,am335x-usb-phy"; - reg = <0x1b00 0x100>; - reg-names = "phy"; - ti,ctrl_mod = <&usb_ctrl_mod>; - #phy-cells = <0>; - }; - - usb1: usb@1800 { - compatible = "ti,musb-am33xx"; - reg = <0x1c00 0x400>, - <0x1800 0x200>; - reg-names = "mc", "control"; - interrupts = <19>; - interrupt-names = "mc"; - dr_mode = "otg"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - phys = <&usb1_phy>; - - dmas = <&cppi41dma 15 0 &cppi41dma 16 0 - &cppi41dma 17 0 &cppi41dma 18 0 - &cppi41dma 19 0 &cppi41dma 20 0 - &cppi41dma 21 0 &cppi41dma 22 0 - &cppi41dma 23 0 &cppi41dma 24 0 - &cppi41dma 25 0 &cppi41dma 26 0 - &cppi41dma 27 0 &cppi41dma 28 0 - &cppi41dma 29 0 &cppi41dma 15 1 - &cppi41dma 16 1 &cppi41dma 17 1 - &cppi41dma 18 1 &cppi41dma 19 1 - &cppi41dma 20 1 &cppi41dma 21 1 - &cppi41dma 22 1 &cppi41dma 23 1 - &cppi41dma 24 1 &cppi41dma 25 1 - &cppi41dma 26 1 &cppi41dma 27 1 - &cppi41dma 28 1 &cppi41dma 29 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - cppi41dma: dma-controller@2000 { - compatible = "ti,am3359-cppi41"; - reg = <0x0000 0x1000>, - <0x2000 0x1000>, - <0x3000 0x1000>, - <0x4000 0x4000>; - reg-names = "glue", "controller", "scheduler", "queuemgr"; - interrupts = <17>; - interrupt-names = "glue"; - #dma-cells = <2>; - #dma-channels = <30>; - #dma-requests = <256>; - }; - }; - - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x10000>; /* 64k */ - ranges = <0x0 0x40300000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - pm_sram_code: pm-code-sram@0 { - compatible = "ti,sram"; - reg = <0x0 0x1000>; - protect-exec; - }; - - pm_sram_data: pm-data-sram@1000 { - compatible = "ti,sram"; - reg = <0x1000 0x1000>; - pool; - }; - }; - - emif: emif@4c000000 { - compatible = "ti,emif-am3352"; - reg = <0x4c000000 0x1000000>; - ti,hwmods = "emif"; - interrupts = <101>; - sram = <&pm_sram_code - &pm_sram_data>; - ti,no-idle; - }; - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - ti,no-idle-on-init; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <7>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - sham: sham@53100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36 0>; - dma-names = "rx"; - }; - - aes: aes@53500000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes"; - reg = <0x53500000 0xa0>; - interrupts = <103>; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; - }; - }; -}; - -#include "am33xx-l4.dtsi" -#include "am33xx-clocks.dtsi" - -&prcm { - prm_per: prm@c00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xc00 0x100>; - #reset-cells = <1>; - }; - - prm_wkup: prm@d00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xd00 0x100>; - #reset-cells = <1>; - }; - - prm_device: prm@f00 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0xf00 0x100>; - #reset-cells = <1>; - }; - - prm_gfx: prm@1100 { - compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; - reg = <0x1100 0x100>; - #reset-cells = <1>; - }; -}; |