summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts')
-rw-r--r--arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts383
1 files changed, 383 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
new file mode 100644
index 000000000000..941682844faf
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Hardkernel ODROID-C1";
+ compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ mmc0 = &sd_card_slot;
+ mmc1 = &sdhc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-blue {
+ label = "c1:blue:alive";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_3v3>;
+
+ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_3v3>;
+
+ /*
+ * signal name from schematics: TF_3V3N_1V8_EN
+ */
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0
+ 1800000 1>;
+ };
+
+ rtc32k_xtal: rtc32k-xtal-clk {
+ /* X3 in the schematics */
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "RTC32K";
+ #clock-cells = <0>;
+ };
+
+ vcc_1v8: regulator-vcc-1v8 {
+ /*
+ * RICHTEK RT9179 configured for a fixed output voltage of
+ * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+ * VDD1V8 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 3.3V. This supplies not only VCC3V3 but
+ * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcck: regulator-vcck {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwm-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 0 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddc_ddr: regulator-vddc-ddr {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 1.5V. This supplies not only DDR_VDDC but
+ * also DDR3_1V5 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "DDR_VDDC";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vddee: regulator-vddee {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDEE";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwm-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 1 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd_rtc: regulator-vdd-rtc {
+ /*
+ * Torex Semiconductor XC6215 configured for a fixed output of
+ * 0.9V.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+&efuse {
+ ethernet_mac_address: mac@1b4 {
+ reg = <0x1b4 0x6>;
+ };
+};
+
+&ethmac {
+ status = "okay";
+
+ pinctrl-0 = <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy>;
+ phy-mode = "rgmii-id";
+
+ nvmem-cells = <&ethernet_mac_address>;
+ nvmem-cell-names = "mac-address";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Realtek RTL8211F (0x001cc916) */
+ eth_phy: ethernet-phy@0 {
+ reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* GPIOH_3 */
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&gpio {
+ gpio-line-names = /* Bank GPIOX */
+ "J2 Header Pin 35", "J2 Header Pin 36",
+ "J2 Header Pin 32", "J2 Header Pin 31",
+ "J2 Header Pin 29", "J2 Header Pin 18",
+ "J2 Header Pin 22", "J2 Header Pin 16",
+ "J2 Header Pin 23", "J2 Header Pin 21",
+ "J2 Header Pin 19", "J2 Header Pin 33",
+ "J2 Header Pin 8", "J2 Header Pin 10",
+ "J2 Header Pin 15", "J2 Header Pin 13",
+ "J2 Header Pin 24", "J2 Header Pin 26",
+ /* Bank GPIOY */
+ "Revision (upper)", "Revision (lower)",
+ "J2 Header Pin 7", "", "J2 Header Pin 12",
+ "J2 Header Pin 11", "", "", "",
+ "TFLASH_VDD_EN", "", "",
+ /* Bank GPIODV */
+ "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+ "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+ "",
+ /* Bank GPIOH */
+ "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+ "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+ "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+ "ETH_RGMII_TX_CLK",
+ /* Bank CARD */
+ "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+ "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)",
+ "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+ /* Bank BOOT */
+ "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+ "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+ "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+ "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+ "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+ "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+ "", "", "", "",
+ /* Bank DIF */
+ "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+ "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+ "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+ "ETH_MDC", "ETH_MDIO";
+};
+
+&gpio_ao {
+ gpio-line-names = "UART TX", "UART RX", "",
+ "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+ "USB_OTG_PWREN", "J7 Header Pin 2",
+ "IR_IN", "J7 Header Pin 4",
+ "J7 Header Pin 6", "J7 Header Pin 5",
+ "J7 Header Pin 7", "HDMI_CEC",
+ "SYS_LED", "", "";
+};
+
+&ir_receiver {
+ status = "okay";
+ pinctrl-0 = <&ir_recv_pins>;
+ pinctrl-names = "default";
+};
+
+&mali {
+ mali-supply = <&vddee>;
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+ status = "okay";
+
+ pinctrl-0 = <&sdxc_c_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ max-frequency = <100000000>;
+
+ disable-wp;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sdio;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>, <&xtal>;
+ clock-names = "clkin0", "clkin1";
+};
+
+&rtc {
+ /* needs to be enabled manually when a battery is connected */
+ clocks = <&rtc32k_xtal>;
+ vdd-supply = <&vdd_rtc>;
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub@1 {
+ /* Genesys Logic GL852G usb hub */
+ compatible = "usb5e3,610";
+ reg = <1>;
+ vdd-supply = <&p5v0>;
+ reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ };
+};
generated by cgit (git 2.34.1) at 2024-05-09 03:23:17 +0000