summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/arm/integratorcp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/arm/integratorcp.dts')
-rw-r--r--arch/arm/boot/dts/arm/integratorcp.dts322
1 files changed, 322 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
new file mode 100644
index 000000000000..c011333eb165
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+ model = "ARM Integrator/CP";
+ compatible = "arm,integrator-cp";
+
+ chosen {
+ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ /*
+ * Since the board has pluggable CPU modules, we
+ * cannot define a proper compatible here. Let the
+ * boot loader fill in the apropriate compatible
+ * string if necessary.
+ */
+ /* compatible = "arm,arm920t"; */
+ reg = <0>;
+ /*
+ * TBD comment.
+ */
+ /* kHz uV */
+ operating-points = <50000 0
+ 48000 0>;
+ clocks = <&cmcore>;
+ clock-names = "cpu";
+ clock-latency = <1000000>; /* 1 ms */
+ };
+ };
+
+ /*
+ * The Integrator/CP overall clocking architecture can be found in
+ * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+ * appear to illustrate the layout used in most configurations.
+ */
+
+ /* The codec chrystal operates at 24.576 MHz */
+ xtal_codec: xtal24.576@24.576M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ /* The chrystal is divided by 2 by the codec for the AACI bit clock */
+ aaci_bitclk: aaci_bitclk@12.288M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&xtal_codec>;
+ };
+
+ /* This is a 25MHz chrystal on the base board */
+ xtal25mhz: xtal25mhz@25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
+ /* Actually sysclk I think */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ core-module@10000000 {
+ /* 24 MHz chrystal on the core module */
+ cm24mhz: cm24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ /* Oscillator on the core module, clocks the CPU core */
+ cmcore: clock-controller@8 {
+ compatible = "arm,syscon-icst525-integratorcp-cm-core";
+ reg = <0x08 0x04>;
+ #clock-cells = <0>;
+ lock-offset = <0x14>;
+ vco-offset = <0x08>;
+ clocks = <&cm24mhz>;
+ };
+
+ /* Oscillator on the core module, clocks the memory bus */
+ cmmem: clock-controller@8,12 {
+ compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+ reg = <0x08 0x04>;
+ #clock-cells = <0>;
+ lock-offset = <0x14>;
+ vco-offset = <0x08>;
+ clocks = <&cm24mhz>;
+ };
+
+ /* Auxilary oscillator on the core module, clocks the CLCD */
+ auxosc: clock-controller@1c {
+ compatible = "arm,syscon-icst525";
+ reg = <0x1c 0x04>;
+ #clock-cells = <0>;
+ lock-offset = <0x14>;
+ vco-offset = <0x1c>;
+ clocks = <&cm24mhz>;
+ };
+
+ /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+ kmiclk: kmiclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <3>;
+ clock-mult = <1>;
+ clocks = <&cm24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&cm24mhz>;
+ };
+ };
+
+ syscon {
+ compatible = "arm,integrator-cp-syscon", "syscon";
+ reg = <0xcb000000 0x100>;
+ };
+
+ timer0: timer@13000000 {
+ /* TIMER0 runs directly on the 25MHz chrystal */
+ compatible = "arm,integrator-cp-timer";
+ clocks = <&xtal25mhz>;
+ };
+
+ timer1: timer@13000100 {
+ /* TIMER1 runs @ 1MHz */
+ compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
+ };
+
+ timer2: timer@13000200 {
+ /* TIMER2 runs @ 1MHz */
+ compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
+ };
+
+ pic: pic@14000000 {
+ valid-mask = <0x1fc003ff>;
+ };
+
+ cic: cic@10000040 {
+ compatible = "arm,versatile-fpga-irq";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x10000040 0x100>;
+ clear-mask = <0xffffffff>;
+ valid-mask = <0x00000007>;
+ };
+
+ /* The SIC is cascaded off IRQ 26 on the PIC */
+ sic: sic@ca000000 {
+ compatible = "arm,versatile-fpga-irq";
+ interrupt-parent = <&pic>;
+ interrupts = <26>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xca000000 0x100>;
+ clear-mask = <0x00000fff>;
+ valid-mask = <0x00000fff>;
+ };
+
+ ethernet@c8000000 {
+ compatible = "smsc,lan91c111";
+ reg = <0xc8000000 0x10>;
+ interrupt-parent = <&pic>;
+ interrupts = <27>;
+ };
+
+ bridge {
+ compatible = "ti,ths8134a", "ti,ths8134";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&clcd_pads_vga_dac>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+
+ fpga {
+ /*
+ * These PrimeCells are at the same location and using
+ * the same interrupts in all Integrators, but in the CP
+ * slightly newer versions are deployed.
+ */
+ rtc@15000000 {
+ compatible = "arm,pl031", "arm,primecell";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ serial@16000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial@17000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ kmi@18000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@19000000 {
+ compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ /*
+ * These PrimeCells are only available on the Integrator/CP
+ */
+ mmc@1c000000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x1c000000 0x1000>;
+ interrupts = <23 24>;
+ max-frequency = <515633>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ aaci@1d000000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x1d000000 0x1000>;
+ interrupts = <25>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd@c0000000 {
+ compatible = "arm,pl110", "arm,primecell";
+ reg = <0xC0000000 0x1000>;
+ interrupts = <22>;
+ clocks = <&auxosc>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+ max-memory-bandwidth = <40000000>;
+
+ /*
+ * This port is routed through a PLD (Programmable
+ * Logic Device) that routes the output from the CLCD
+ * (after transformations) to the VGA DAC and also an
+ * external panel connector. The PLD is essential for
+ * supporting RGB565/BGR565.
+ *
+ * The signals from the port thus reaches two endpoints.
+ * The PLD is managed through a few special bits in the
+ * FPGA "sysreg".
+ *
+ * This arrangement can be clearly seen in
+ * ARM DUI 0225D, page 3-41, figure 3-19.
+ */
+ port@0 {
+ clcd_pads_vga_dac: endpoint {
+ remote-endpoint = <&vga_bridge_in>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+ };
+ };
+};
generated by cgit (git 2.34.1) at 2024-05-09 18:32:11 +0000