diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-370-netgear-rn102.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-370-netgear-rn102.dts | 111 |
1 files changed, 60 insertions, 51 deletions
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index d6d572e5af32..4e24932c6e30 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -35,7 +35,7 @@ pcie-controller { status = "okay"; - /* Connected to Marvell SATA controller */ + /* Connected to Marvell 88SE9170 SATA controller */ pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; @@ -53,60 +53,23 @@ status = "okay"; }; + /* eSATA interface */ sata@a0000 { - nr-ports = <2>; + nr-ports = <1>; status = "okay"; }; - pinctrl { - power_led_pin: power-led-pin { - marvell,pins = "mpp57"; - marvell,function = "gpio"; - }; - - sata1_led_pin: sata1-led-pin { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - sata2_led_pin: sata2-led-pin { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - backup_led_pin: backup-led-pin { - marvell,pins = "mpp56"; - marvell,function = "gpio"; - }; - - backup_button_pin: backup-button-pin { - marvell,pins = "mpp58"; - marvell,function = "gpio"; - }; - - power_button_pin: power-button-pin { - marvell,pins = "mpp62"; - marvell,function = "gpio"; - }; - - reset_button_pin: reset-button-pin { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - poweroff: poweroff { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - }; - mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -122,7 +85,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; @@ -143,6 +106,10 @@ marvell,nand-enable-arbiter; nand-on-flash-bbt; + /* Use Hardware BCH ECC */ + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + partition@0 { label = "u-boot"; reg = <0x0000000 0x180000>; /* 1.5MB */ @@ -196,20 +163,20 @@ default-state = "keep"; }; - green-sata1-led { - label = "rn102:green:sata1"; + blue-sata1-led { + label = "rn102:blue:sata1"; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green-sata2-led { - label = "rn102:green:sata2"; + blue-sata2-led { + label = "rn102:blue:sata2"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green-backup-led { - label = "rn102:green:backup"; + blue-backup-led { + label = "rn102:blue:backup"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "on"; }; @@ -248,3 +215,45 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; }; + +&pinctrl { + power_led_pin: power-led-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; + + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + backup_button_pin: backup-button-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + poweroff: poweroff { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; +}; |