summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/armada-388-helios4.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-388-helios4.dts')
-rw-r--r--arch/arm/boot/dts/armada-388-helios4.dts313
1 files changed, 0 insertions, 313 deletions
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
deleted file mode 100644
index 705adfa8c680..000000000000
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ /dev/null
@@ -1,313 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for Helios4
- * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
- *
- * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
- *
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
-
-/ {
- model = "Helios4";
- compatible = "kobol,helios4", "marvell,armada388",
- "marvell,armada385", "marvell,armada380";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x80000000>; /* 2 GB */
- };
-
- aliases {
- /* So that mvebu u-boot can update the MAC addresses */
- ethernet1 = &eth0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_12v: regulator-12v {
- compatible = "regulator-fixed";
- regulator-name = "power_brick_12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&reg_12v>;
- };
-
- reg_5p0v_hdd: regulator-5v-hdd {
- compatible = "regulator-fixed";
- regulator-name = "5V_HDD";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&reg_12v>;
- };
-
- reg_5p0v_usb: regulator-5v-usb {
- compatible = "regulator-fixed";
- regulator-name = "USB-PWR";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- enable-active-high;
- gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&reg_12v>;
- };
-
- system-leds {
- compatible = "gpio-leds";
- status-led {
- label = "helios4:green:status";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
- fault-led {
- label = "helios4:red:fault";
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
-
- io-leds {
- compatible = "gpio-leds";
- sata1-led {
- label = "helios4:green:ata1";
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- default-state = "off";
- };
- sata2-led {
- label = "helios4:green:ata2";
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- default-state = "off";
- };
- sata3-led {
- label = "helios4:green:ata3";
- gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata3";
- default-state = "off";
- };
- sata4-led {
- label = "helios4:green:ata4";
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata4";
- default-state = "off";
- };
- usb-led {
- label = "helios4:green:usb";
- gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usb-host";
- default-state = "off";
- };
- };
-
- fan1: j10-pwm {
- compatible = "pwm-fan";
- pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
- };
-
- fan2: j17-pwm {
- compatible = "pwm-fan";
- pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
- };
-
- usb2_phy: usb2-phy {
- compatible = "usb-nop-xceiv";
- vbus-regulator = <&reg_5p0v_usb>;
- };
-
- usb3_phy: usb3-phy {
- compatible = "usb-nop-xceiv";
- };
-
- soc {
- internal-regs {
- i2c@11000 {
- clock-frequency = <400000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- /*
- * PCA9655 GPIO expander, up to 1MHz clock.
- * 0-Board Revision bit 0 #
- * 1-Board Revision bit 1 #
- * 5-USB3 overcurrent
- * 6-USB3 power
- */
- expander0: gpio-expander@20 {
- /*
- * This is how it should be:
- * compatible = "onnn,pca9655",
- * "nxp,pca9555";
- * but you can't do this because of
- * the way I2C works.
- */
- compatible = "nxp,pca9555";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x20>;
- pinctrl-names = "default";
- pinctrl-0 = <&pca0_pins>;
- interrupt-parent = <&gpio0>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- board_rev_bit_0 {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_LOW>;
- input;
- line-name = "board-rev-0";
- };
- board_rev_bit_1 {
- gpio-hog;
- gpios = <1 GPIO_ACTIVE_LOW>;
- input;
- line-name = "board-rev-1";
- };
- usb3_ilimit {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "usb-overcurrent-status";
- };
- };
-
- temp_sensor: temp@4c {
- compatible = "ti,lm75";
- reg = <0x4c>;
- vcc-supply = <&reg_3p3v>;
- };
- };
-
- i2c@11100 {
- /*
- * External I2C Bus for user peripheral
- */
- clock-frequency = <400000>;
- pinctrl-0 = <&helios_i2c1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- sata@a8000 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata0: sata-port@0 {
- reg = <0>;
- };
-
- sata1: sata-port@1 {
- reg = <1>;
- };
- };
-
- sata@e0000 {
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata2: sata-port@0 {
- reg = <0>;
- };
-
- sata3: sata-port@1 {
- reg = <1>;
- };
- };
-
- spi@10680 {
- pinctrl-0 = <&spi1_pins
- &microsom_spi1_cs_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- sdhci@d8000 {
- bus-width = <4>;
- cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- pinctrl-0 = <&helios_sdhci_pins
- &helios_sdhci_cd_pins>;
- pinctrl-names = "default";
- status = "okay";
- vmmc = <&reg_3p3v>;
- wp-inverted;
- };
-
- usb@58000 {
- usb-phy = <&usb2_phy>;
- status = "okay";
- };
-
- usb3@f0000 {
- status = "okay";
- };
-
- usb3@f8000 {
- status = "okay";
- };
-
- pinctrl@18000 {
- pca0_pins: pca0-pins {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
- microsom_phy0_int_pins: microsom-phy0-int-pins {
- marvell,pins = "mpp18";
- marvell,function = "gpio";
- };
- helios_i2c1_pins: i2c1-pins {
- marvell,pins = "mpp26", "mpp27";
- marvell,function = "i2c1";
- };
- helios_sdhci_cd_pins: helios-sdhci-cd-pins {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
- helios_sdhci_pins: helios-sdhci-pins {
- marvell,pins = "mpp21", "mpp28",
- "mpp37", "mpp38",
- "mpp39", "mpp40";
- marvell,function = "sd0";
- };
- helios_led_pins: helios-led-pins {
- marvell,pins = "mpp24", "mpp25",
- "mpp49", "mpp50",
- "mpp52", "mpp53",
- "mpp54";
- marvell,function = "gpio";
- };
- helios_fan_pins: helios-fan-pins {
- marvell,pins = "mpp41", "mpp43",
- "mpp48", "mpp55";
- marvell,function = "gpio";
- };
- microsom_spi1_cs_pins: spi1-cs-pins {
- marvell,pins = "mpp59";
- marvell,function = "spi1";
- };
- };
- };
- };
-};
generated by cgit (git 2.34.1) at 2024-04-19 03:35:58 +0000