diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-ast2600-evb.dts')
| -rw-r--r-- | arch/arm/boot/dts/aspeed-ast2600-evb.dts | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 2772796e215e..401034da6dcc 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "AST2600 EVB"; @@ -21,6 +22,46 @@ device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + vcc_sdhci0: regulator-vcc-sdhci0 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci0: regulator-vccq-sdhci0 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; + + vcc_sdhci1: regulator-vcc-sdhci1 { + compatible = "regulator-fixed"; + regulator-name = "SDHCI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhci1: regulator-vccq-sdhci1 { + compatible = "regulator-gpio"; + regulator-name = "SDHCI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, + <1800000 0>; + }; }; &mdio0 { @@ -245,3 +286,46 @@ &uhci { status = "okay"; }; + +&sdc { + status = "okay"; +}; + +/* + * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be + * toggled by GPIO pins. + * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the + * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to + * a 1.8v and a 3.3v power load switch that provides signal voltage to + * sdhci0 bus. + * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled. + * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal + * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled, + * sdhci0 signal voltage becomes 1.8v. + * AST2600-A2 EVB also supports toggling signal voltage for sdhci1. + * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3 + * as power-switch-gpio. + */ +&sdhci0 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci0>; + vqmmc-supply = <&vccq_sdhci0>; + clk-phase-sd-hs = <7>, <200>; +}; + +&sdhci1 { + status = "okay"; + bus-width = <4>; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; + sdhci-caps-mask = <0x7 0x0>; + sdhci,wp-inverted; + vmmc-supply = <&vcc_sdhci1>; + vqmmc-supply = <&vccq_sdhci1>; + clk-phase-sd-hs = <7>, <200>; +}; |