diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-kizbox.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-kizbox.dts | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts deleted file mode 100644 index 90996eaf73b2..000000000000 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> - * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "at91sam9g20.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x2000000>; - }; - - clocks { - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - usart3: serial@fffd0000 { - status = "okay"; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - usb0: ohci@500000 { - num-ports = <1>; - status = "okay"; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "PB_RST"; - gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - i2c-gpio-0 { - status = "okay"; - - rtc: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - network_green { - label = "pwm:green:network"; - pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - network_red { - label = "pwm:red:network"; - pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - user_green { - label = "pwm:green:user"; - pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - user_red { - label = "pwm:red:user"; - pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; - - tcb_pwm: pwm { - compatible = "atmel,tcb-pwm"; - #pwm-cells = <3>; - tc-block = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa0 - &pinctrl_tcb1_tioa1 - &pinctrl_tcb1_tioa2 - &pinctrl_tcb1_tiob0>; - }; -}; |