diff options
Diffstat (limited to 'arch/arm/boot/dts/bcm958525er.dts')
| -rw-r--r-- | arch/arm/boot/dts/bcm958525er.dts | 197 |
1 files changed, 0 insertions, 197 deletions
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts deleted file mode 100644 index 9b9c225a1fb3..000000000000 --- a/arch/arm/boot/dts/bcm958525er.dts +++ /dev/null @@ -1,197 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2016 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "bcm-nsp.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "NorthStar Plus SVK (BCM958525ER)"; - compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@60000000 { - device_type = "memory"; - reg = <0x60000000 0x80000000>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; - open-source; - priority = <200>; - }; -}; - -/* USB 3 support needed to be complete */ - -&dma { - status = "okay"; -}; - -&amac0 { - status = "okay"; -}; - -&amac1 { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&nand_controller { - nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; - - #address-cells = <1>; - #size-cells = <1>; - - nand-ecc-strength = <24>; - nand-ecc-step-size = <1024>; - - brcm,nand-oob-sector-size = <27>; - - partition@0 { - label = "nboot"; - reg = <0x00000000 0x00200000>; - read-only; - }; - partition@200000 { - label = "nenv"; - reg = <0x00200000 0x00400000>; - }; - partition@600000 { - label = "nsystem"; - reg = <0x00600000 0x00a00000>; - }; - partition@1000000 { - label = "nrootfs"; - reg = <0x01000000 0x03000000>; - }; - partition@4000000 { - label = "ncustfs"; - reg = <0x04000000 0x3c000000>; - }; - }; -}; - -&ohci0 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; -}; - -&qspi { - status = "okay"; - bspi-sel = <0>; - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80"; - reg = <0x0>; - spi-max-frequency = <12500000>; - m25p,fast-read; - spi-cpol; - spi-cpha; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x000a0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0x000a0000 0x00060000>; - }; - - partition@100000 { - label = "system"; - reg = <0x00100000 0x00600000>; - }; - - partition@700000 { - label = "rootfs"; - reg = <0x00700000 0x01900000>; - }; - }; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&usb3_phy { - status = "okay"; -}; - -&xhci { - status = "okay"; -}; - -&srab { - compatible = "brcm,bcm58525-srab", "brcm,nsp-srab"; -}; |