diff options
Diffstat (limited to 'arch/arm/boot/dts/dove-cubox.dts')
-rw-r--r-- | arch/arm/boot/dts/dove-cubox.dts | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts deleted file mode 100644 index dbba0c8cdab1..000000000000 --- a/arch/arm/boot/dts/dove-cubox.dts +++ /dev/null @@ -1,150 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "dove.dtsi" - -/ { - model = "SolidRun CuBox"; - compatible = "solidrun,cubox", "marvell,dove"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_gpio_18>; - pinctrl-names = "default"; - - led-power { - label = "Power"; - gpios = <&gpio0 18 1>; - default-state = "keep"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 1 0>; - pinctrl-0 = <&pmx_gpio_1>; - pinctrl-names = "default"; - }; - }; - - clocks { - /* 25MHz reference crystal */ - ref25: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio0 19 1>; - pinctrl-0 = <&pmx_gpio_19>; - pinctrl-names = "default"; - }; - - gpu-subsystem { - status = "okay"; - }; -}; - -&uart0 { status = "okay"; }; -&sata0 { status = "okay"; }; -&mdio { status = "okay"; }; -ð { - status = "okay"; - ethernet-port@0 { - phy-handle = <ðphy>; - }; -}; - -&mdio { - ethphy: ethernet-phy@1 { - compatible = "marvell,88e1310"; - reg = <1>; - }; -}; - -&gpu { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <100000>; - - si5351: clock-generator@60 { - compatible = "silabs,si5351a-msop"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - /* connect xtal input to 25MHz reference */ - clocks = <&ref25>; - clock-names = "xtal"; - - /* connect xtal input as source of pll0 and pll1 */ - silabs,pll-source = <0 0>, <1 0>; - - clkout0 { - reg = <0>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <0>; - silabs,clock-source = <0>; - silabs,pll-master; - }; - - clkout2 { - reg = <2>; - silabs,drive-strength = <8>; - silabs,multisynth-source = <1>; - silabs,clock-source = <0>; - silabs,pll-master; - }; - }; -}; - -&sdio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - /* spi0.0: 4M Flash Winbond W25Q32BV */ - flash@0 { - compatible = "st,w25q32"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&audio1 { - status = "okay"; - clocks = <&gate_clk 13>, <&si5351 2>; - clock-names = "internal", "extclk"; - pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>; - pinctrl-names = "default"; -}; |