summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/dra7.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra7.dtsi')
-rw-r--r--arch/arm/boot/dts/dra7.dtsi816
1 files changed, 0 insertions, 816 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
deleted file mode 100644
index 73e5011f531a..000000000000
--- a/arch/arm/boot/dts/dra7.dtsi
+++ /dev/null
@@ -1,816 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dra7.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-#include <dt-bindings/clock/dra7.h>
-
-#define MAX_SOURCES 400
-
-/ {
- #address-cells = <2>;
- #size-cells = <2>;
-
- compatible = "ti,dra7xx";
- interrupt-parent = <&crossbar_mpu>;
- chosen { };
-
- aliases {
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- i2c4 = &i2c5;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- serial7 = &uart8;
- serial8 = &uart9;
- serial9 = &uart10;
- ethernet0 = &cpsw_emac0;
- ethernet1 = &cpsw_emac1;
- d_can0 = &dcan1;
- d_can1 = &dcan2;
- spi0 = &qspi;
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- interrupt-parent = <&gic>;
- };
-
- gic: interrupt-controller@48211000 {
- compatible = "arm,cortex-a15-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0 0x48211000 0x0 0x1000>,
- <0x0 0x48212000 0x0 0x2000>,
- <0x0 0x48214000 0x0 0x2000>,
- <0x0 0x48216000 0x0 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- interrupt-parent = <&gic>;
- };
-
- wakeupgen: interrupt-controller@48281000 {
- compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x0 0x48281000 0x0 0x1000>;
- interrupt-parent = <&gic>;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
-
- operating-points-v2 = <&cpu0_opp_table>;
-
- clocks = <&dpll_mpu_ck>;
- clock-names = "cpu";
-
- clock-latency = <300000>; /* From omap-cpufreq driver */
-
- /* cooling options */
- #cooling-cells = <2>; /* min followed by max */
-
- vbb-supply = <&abb_mpu>;
- };
- };
-
- cpu0_opp_table: opp-table {
- compatible = "operating-points-v2-ti-cpu";
- syscon = <&scm_wkup>;
-
- opp_nom-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <1060000 850000 1150000>,
- <1060000 850000 1150000>;
- opp-supported-hw = <0xFF 0x01>;
- opp-suspend;
- };
-
- opp_od-1176000000 {
- opp-hz = /bits/ 64 <1176000000>;
- opp-microvolt = <1160000 885000 1160000>,
- <1160000 885000 1160000>;
-
- opp-supported-hw = <0xFF 0x02>;
- };
-
- opp_high@1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1210000 950000 1250000>,
- <1210000 950000 1250000>;
- opp-supported-hw = <0xFF 0x04>;
- };
- };
-
- /*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap5-mpu";
- ti,hwmods = "mpu";
- };
- };
-
- /*
- * XXX: Use a flat representation of the SOC interconnect.
- * The real OMAP interconnect network is quite complex.
- * Since it will not bring real advantage to represent that in DT for
- * the moment, just use a fake OCP bus entry to represent the whole bus
- * hierarchy.
- */
- ocp {
- compatible = "ti,dra7-l3-noc", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x0 0xc0000000>;
- ti,hwmods = "l3_main_1", "l3_main_2";
- reg = <0x0 0x44000000 0x0 0x1000000>,
- <0x0 0x45000000 0x0 0x1000>;
- interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
- l4_cfg: interconnect@4a000000 {
- };
- l4_wkup: interconnect@4ae00000 {
- };
- l4_per1: interconnect@48000000 {
- };
- l4_per2: interconnect@48400000 {
- };
- l4_per3: interconnect@48800000 {
- };
-
- axi@0 {
- compatible = "simple-bus";
- #size-cells = <1>;
- #address-cells = <1>;
- ranges = <0x51000000 0x51000000 0x3000
- 0x0 0x20000000 0x10000000>;
- /**
- * To enable PCI endpoint mode, disable the pcie1_rc
- * node and enable pcie1_ep mode.
- */
- pcie1_rc: pcie@51000000 {
- reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
- reg-names = "rc_dbics", "ti_conf", "config";
- interrupts = <0 232 0x4>, <0 233 0x4>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x03000 0 0x00010000
- 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
- bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- num-lanes = <1>;
- linux,pci-domain = <0>;
- ti,hwmods = "pcie1";
- phys = <&pcie1_phy>;
- phy-names = "pcie-phy0";
- ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie1_intc 1>,
- <0 0 0 2 &pcie1_intc 2>,
- <0 0 0 3 &pcie1_intc 3>,
- <0 0 0 4 &pcie1_intc 4>;
- ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
- status = "disabled";
- pcie1_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
-
- pcie1_ep: pcie_ep@51000000 {
- reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
- reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
- interrupts = <0 232 0x4>;
- num-lanes = <1>;
- num-ib-windows = <4>;
- num-ob-windows = <16>;
- ti,hwmods = "pcie1";
- phys = <&pcie1_phy>;
- phy-names = "pcie-phy0";
- ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
- ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
- status = "disabled";
- };
- };
-
- axi@1 {
- compatible = "simple-bus";
- #size-cells = <1>;
- #address-cells = <1>;
- ranges = <0x51800000 0x51800000 0x3000
- 0x0 0x30000000 0x10000000>;
- status = "disabled";
- pcie2_rc: pcie@51800000 {
- reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
- reg-names = "rc_dbics", "ti_conf", "config";
- interrupts = <0 355 0x4>, <0 356 0x4>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x03000 0 0x00010000
- 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
- bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- num-lanes = <1>;
- linux,pci-domain = <1>;
- ti,hwmods = "pcie2";
- phys = <&pcie2_phy>;
- phy-names = "pcie-phy0";
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie2_intc 1>,
- <0 0 0 2 &pcie2_intc 2>,
- <0 0 0 3 &pcie2_intc 3>,
- <0 0 0 4 &pcie2_intc 4>;
- ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
- pcie2_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
- };
-
- ocmcram1: ocmcram@40300000 {
- compatible = "mmio-sram";
- reg = <0x40300000 0x80000>;
- ranges = <0x0 0x40300000 0x80000>;
- #address-cells = <1>;
- #size-cells = <1>;
- /*
- * This is a placeholder for an optional reserved
- * region for use by secure software. The size
- * of this region is not known until runtime so it
- * is set as zero to either be updated to reserve
- * space or left unchanged to leave all SRAM for use.
- * On HS parts that that require the reserved region
- * either the bootloader can update the size to
- * the required amount or the node can be overridden
- * from the board dts file for the secure platform.
- */
- sram-hs@0 {
- compatible = "ti,secure-ram";
- reg = <0x0 0x0>;
- };
- };
-
- /*
- * NOTE: ocmcram2 and ocmcram3 are not available on all
- * DRA7xx and AM57xx variants. Confirm availability in
- * the data manual for the exact part number in use
- * before enabling these nodes in the board dts file.
- */
- ocmcram2: ocmcram@40400000 {
- status = "disabled";
- compatible = "mmio-sram";
- reg = <0x40400000 0x100000>;
- ranges = <0x0 0x40400000 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- ocmcram3: ocmcram@40500000 {
- status = "disabled";
- compatible = "mmio-sram";
- reg = <0x40500000 0x100000>;
- ranges = <0x0 0x40500000 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- bandgap: bandgap@4a0021e0 {
- reg = <0x4a0021e0 0xc
- 0x4a00232c 0xc
- 0x4a002380 0x2c
- 0x4a0023C0 0x3c
- 0x4a002564 0x8
- 0x4a002574 0x50>;
- compatible = "ti,dra752-bandgap";
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- #thermal-sensor-cells = <1>;
- };
-
- dsp1_system: dsp_system@40d00000 {
- compatible = "syscon";
- reg = <0x40d00000 0x100>;
- };
-
- dra7_iodelay_core: padconf@4844a000 {
- compatible = "ti,dra7-iodelay";
- reg = <0x4844a000 0x0d1c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <2>;
- };
-
- edma: edma@43300000 {
- compatible = "ti,edma3-tpcc";
- ti,hwmods = "tpcc";
- reg = <0x43300000 0x100000>;
- reg-names = "edma3_cc";
- interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_ccint", "edma3_mperr",
- "edma3_ccerrint";
- dma-requests = <64>;
- #dma-cells = <2>;
-
- ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
- /*
- * memcpy is disabled, can be enabled with:
- * ti,edma-memcpy-channels = <20 21>;
- * for example. Note that these channels need to be
- * masked in the xbar as well.
- */
- };
-
- edma_tptc0: tptc@43400000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc0";
- reg = <0x43400000 0x100000>;
- interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_tcerrint";
- };
-
- edma_tptc1: tptc@43500000 {
- compatible = "ti,edma3-tptc";
- ti,hwmods = "tptc1";
- reg = <0x43500000 0x100000>;
- interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_tcerrint";
- };
-
- dmm@4e000000 {
- compatible = "ti,omap5-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dmm";
- };
-
- mmu0_dsp1: mmu@40d01000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d01000 0x100>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu0_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x0>;
- status = "disabled";
- };
-
- mmu1_dsp1: mmu@40d02000 {
- compatible = "ti,dra7-dsp-iommu";
- reg = <0x40d02000 0x100>;
- interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu1_dsp1";
- #iommu-cells = <0>;
- ti,syscon-mmuconfig = <&dsp1_system 0x1>;
- status = "disabled";
- };
-
- mmu_ipu1: mmu@58882000 {
- compatible = "ti,dra7-iommu";
- reg = <0x58882000 0x100>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu1";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
- };
-
- mmu_ipu2: mmu@55082000 {
- compatible = "ti,dra7-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu2";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
- status = "disabled";
- };
-
- abb_mpu: regulator-abb-mpu {
- compatible = "ti,abb-v3";
- regulator-name = "abb_mpu";
- #address-cells = <0>;
- #size-cells = <0>;
- clocks = <&sys_clkin1>;
- ti,settling-time = <50>;
- ti,clock-cycles = <16>;
-
- reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0xc>,
- <0x4ae0c158 0x4>;
- reg-names = "setup-address", "control-address",
- "int-address", "efuse-address",
- "ldo-address";
- ti,tranxdone-status-mask = <0x80>;
- /* LDOVBBMPU_FBB_MUX_CTRL */
- ti,ldovbb-override-mask = <0x400>;
- /* LDOVBBMPU_FBB_VSET_OUT */
- ti,ldovbb-vset-mask = <0x1F>;
-
- /*
- * NOTE: only FBB mode used but actual vset will
- * determine final biasing
- */
- ti,abb_info = <
- /*uV ABB efuse rbb_m fbb_m vset_m*/
- 1060000 0 0x0 0 0x02000000 0x01F00000
- 1160000 0 0x4 0 0x02000000 0x01F00000
- 1210000 0 0x8 0 0x02000000 0x01F00000
- >;
- };
-
- abb_ivahd: regulator-abb-ivahd {
- compatible = "ti,abb-v3";
- regulator-name = "abb_ivahd";
- #address-cells = <0>;
- #size-cells = <0>;
- clocks = <&sys_clkin1>;
- ti,settling-time = <50>;
- ti,clock-cycles = <16>;
-
- reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
- <0x4a002470 0x4>;
- reg-names = "setup-address", "control-address",
- "int-address", "efuse-address",
- "ldo-address";
- ti,tranxdone-status-mask = <0x40000000>;
- /* LDOVBBIVA_FBB_MUX_CTRL */
- ti,ldovbb-override-mask = <0x400>;
- /* LDOVBBIVA_FBB_VSET_OUT */
- ti,ldovbb-vset-mask = <0x1F>;
-
- /*
- * NOTE: only FBB mode used but actual vset will
- * determine final biasing
- */
- ti,abb_info = <
- /*uV ABB efuse rbb_m fbb_m vset_m*/
- 1055000 0 0x0 0 0x02000000 0x01F00000
- 1150000 0 0x4 0 0x02000000 0x01F00000
- 1250000 0 0x8 0 0x02000000 0x01F00000
- >;
- };
-
- abb_dspeve: regulator-abb-dspeve {
- compatible = "ti,abb-v3";
- regulator-name = "abb_dspeve";
- #address-cells = <0>;
- #size-cells = <0>;
- clocks = <&sys_clkin1>;
- ti,settling-time = <50>;
- ti,clock-cycles = <16>;
-
- reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
- <0x4a00246c 0x4>;
- reg-names = "setup-address", "control-address",
- "int-address", "efuse-address",
- "ldo-address";
- ti,tranxdone-status-mask = <0x20000000>;
- /* LDOVBBDSPEVE_FBB_MUX_CTRL */
- ti,ldovbb-override-mask = <0x400>;
- /* LDOVBBDSPEVE_FBB_VSET_OUT */
- ti,ldovbb-vset-mask = <0x1F>;
-
- /*
- * NOTE: only FBB mode used but actual vset will
- * determine final biasing
- */
- ti,abb_info = <
- /*uV ABB efuse rbb_m fbb_m vset_m*/
- 1055000 0 0x0 0 0x02000000 0x01F00000
- 1150000 0 0x4 0 0x02000000 0x01F00000
- 1250000 0 0x8 0 0x02000000 0x01F00000
- >;
- };
-
- abb_gpu: regulator-abb-gpu {
- compatible = "ti,abb-v3";
- regulator-name = "abb_gpu";
- #address-cells = <0>;
- #size-cells = <0>;
- clocks = <&sys_clkin1>;
- ti,settling-time = <50>;
- ti,clock-cycles = <16>;
-
- reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0xc>,
- <0x4ae0c154 0x4>;
- reg-names = "setup-address", "control-address",
- "int-address", "efuse-address",
- "ldo-address";
- ti,tranxdone-status-mask = <0x10000000>;
- /* LDOVBBGPU_FBB_MUX_CTRL */
- ti,ldovbb-override-mask = <0x400>;
- /* LDOVBBGPU_FBB_VSET_OUT */
- ti,ldovbb-vset-mask = <0x1F>;
-
- /*
- * NOTE: only FBB mode used but actual vset will
- * determine final biasing
- */
- ti,abb_info = <
- /*uV ABB efuse rbb_m fbb_m vset_m*/
- 1090000 0 0x0 0 0x02000000 0x01F00000
- 1210000 0 0x4 0 0x02000000 0x01F00000
- 1280000 0 0x8 0 0x02000000 0x01F00000
- >;
- };
-
- qspi: spi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>,
- <0x5c000000 0x4000000>;
- reg-names = "qspi_base", "qspi_mmap";
- syscon-chipselects = <&scm_conf 0x558>;
- #address-cells = <1>;
- #size-cells = <0>;
- ti,hwmods = "qspi";
- clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
- clock-names = "fck";
- num-cs = <4>;
- interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- /* OCP2SCP3 */
- sata: sata@4a141100 {
- compatible = "snps,dwc-ahci";
- reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
- ti,hwmods = "sata";
- ports-implemented = <0x1>;
- };
-
- /* OCP2SCP1 */
- /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- reg = <0x50000000 0x37c>; /* device IO registers */
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 4 0>;
- dma-names = "rxtx";
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- status = "disabled";
- };
-
- crossbar_mpu: crossbar@4a002a48 {
- compatible = "ti,irq-crossbar";
- reg = <0x4a002a48 0x130>;
- interrupt-controller;
- interrupt-parent = <&wakeupgen>;
- #interrupt-cells = <3>;
- ti,max-irqs = <160>;
- ti,max-crossbar-sources = <MAX_SOURCES>;
- ti,reg-size = <2>;
- ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
- ti,irqs-skip = <10 133 139 140>;
- ti,irqs-safe-map = <0>;
- };
-
- dss: dss@58000000 {
- compatible = "ti,dra7-dss";
- /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
- /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
- status = "disabled";
- ti,hwmods = "dss_core";
- /* CTRL_CORE_DSS_PLL_CONTROL */
- syscon-pll-ctrl = <&scm_conf 0x538>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dispc@58001000 {
- compatible = "ti,dra7-dispc";
- reg = <0x58001000 0x1000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "dss_dispc";
- clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
- clock-names = "fck";
- /* CTRL_CORE_SMA_SW_1 */
- syscon-pol = <&scm_conf 0x534>;
- };
-
- hdmi: encoder@58060000 {
- compatible = "ti,dra7-hdmi";
- reg = <0x58040000 0x200>,
- <0x58040200 0x80>,
- <0x58040300 0x80>,
- <0x58060000 0x19000>;
- reg-names = "wp", "pll", "phy", "core";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- ti,hwmods = "dss_hdmi";
- clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
- <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
- clock-names = "fck", "sys_clk";
- dmas = <&sdma_xbar 76>;
- dma-names = "audio_tx";
- };
- };
-
- aes1: aes@4b500000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes1";
- reg = <0x4b500000 0xa0>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
-
- aes2: aes@4b700000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes2";
- reg = <0x4b700000 0xa0>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
-
- des: des@480a5000 {
- compatible = "ti,omap4-des";
- ti,hwmods = "des";
- reg = <0x480a5000 0xa0>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
-
- sham: sham@53100000 {
- compatible = "ti,omap5-sham";
- ti,hwmods = "sham";
- reg = <0x4b101000 0x300>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 119 0>;
- dma-names = "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
-
- opp_supply_mpu: opp-supply@4a003b20 {
- compatible = "ti,omap5-opp-supply";
- reg = <0x4a003b20 0xc>;
- ti,efuse-settings = <
- /* uV offset */
- 1060000 0x0
- 1160000 0x4
- 1210000 0x8
- >;
- ti,absolute-max-voltage-uv = <1500000>;
- };
-
- };
-
- thermal_zones: thermal-zones {
- #include "omap4-cpu-thermal.dtsi"
- #include "omap5-gpu-thermal.dtsi"
- #include "omap5-core-thermal.dtsi"
- #include "dra7-dspeve-thermal.dtsi"
- #include "dra7-iva-thermal.dtsi"
- };
-
-};
-
-&cpu_thermal {
- polling-delay = <500>; /* milliseconds */
- coefficients = <0 2000>;
-};
-
-&gpu_thermal {
- coefficients = <0 2000>;
-};
-
-&core_thermal {
- coefficients = <0 2000>;
-};
-
-&dspeve_thermal {
- coefficients = <0 2000>;
-};
-
-&iva_thermal {
- coefficients = <0 2000>;
-};
-
-&cpu_crit {
- temperature = <120000>; /* milli Celsius */
-};
-
-&core_crit {
- temperature = <120000>; /* milli Celsius */
-};
-
-&gpu_crit {
- temperature = <120000>; /* milli Celsius */
-};
-
-&dspeve_crit {
- temperature = <120000>; /* milli Celsius */
-};
-
-&iva_crit {
- temperature = <120000>; /* milli Celsius */
-};
-
-#include "dra7-l4.dtsi"
-#include "dra7xx-clocks.dtsi"
-
-&prm {
- prm_dsp1: prm@400 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x400 0x100>;
- #reset-cells = <1>;
- };
-
- prm_ipu: prm@500 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x500 0x100>;
- #reset-cells = <1>;
- };
-
- prm_core: prm@700 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x700 0x100>;
- #reset-cells = <1>;
- };
-
- prm_iva: prm@f00 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0xf00 0x100>;
- };
-
- prm_dsp2: prm@1b00 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x1b00 0x40>;
- #reset-cells = <1>;
- };
-
- prm_eve1: prm@1b40 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x1b40 0x40>;
- };
-
- prm_eve2: prm@1b80 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x1b80 0x40>;
- };
-
- prm_eve3: prm@1bc0 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x1bc0 0x40>;
- };
-
- prm_eve4: prm@1c00 {
- compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
- reg = <0x1c00 0x60>;
- };
-};