summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi')
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi711
1 files changed, 251 insertions, 460 deletions
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index a183b56283f8..445c6c5a1300 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -12,32 +12,28 @@
* published by the Free Software Foundation.
*/
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include "exynos5422-odroid-core.dtsi"
/ {
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x7EA00000>;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- firmware@02073000 {
- compatible = "samsung,secure-firmware";
- reg = <0x02073000 0x1000>;
- };
-
- fixed-rate-clocks {
- oscclk {
- compatible = "samsung,exynos5420-oscclk";
- clock-frequency = <24000000>;
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key>;
+
+ power_key {
+ /*
+ * The power button (SW2) is connected to the PWRON
+ * pin (active high) of the S2MPS11 PMIC, which acts
+ * as a 16ms debouce filter and signal inverter with
+ * output on ONOB pin (active low). ONOB PMIC pin is
+ * then connected to XEINT3 SoC pin.
+ */
+ gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <0>;
+ wakeup-source;
};
};
@@ -63,22 +59,22 @@
polling-delay-passive = <250>;
polling-delay = <0>;
trips {
- cpu_alert0: cpu-alert-0 {
+ cpu0_alert0: cpu-alert-0 {
temperature = <50000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_alert1: cpu-alert-1 {
+ cpu0_alert1: cpu-alert-1 {
temperature = <60000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_alert2: cpu-alert-2 {
+ cpu0_alert2: cpu-alert-2 {
temperature = <70000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
type = "active";
};
- cpu_crit0: cpu-crit-0 {
+ cpu0_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
@@ -87,59 +83,258 @@
* Exynos542x supports only 4 trip-points
* so for these polling mode is required.
* Start polling at temperature level of last
- * interrupt-driven trip: cpu_alert2
+ * interrupt-driven trip: cpu0_alert2
*/
- cpu_alert3: cpu-alert-3 {
+ cpu0_alert3: cpu-alert-3 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
- cpu_alert4: cpu-alert-4 {
+ cpu0_alert4: cpu-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "passive";
};
-
};
cooling-maps {
map0 {
- trip = <&cpu_alert0>;
+ trip = <&cpu0_alert0>;
cooling-device = <&fan0 0 1>;
};
map1 {
- trip = <&cpu_alert1>;
+ trip = <&cpu0_alert1>;
cooling-device = <&fan0 1 2>;
};
map2 {
- trip = <&cpu_alert2>;
+ trip = <&cpu0_alert2>;
cooling-device = <&fan0 2 3>;
};
/*
- * When reaching cpu_alert3, reduce CPU
+ * When reaching cpu0_alert3, reduce CPU
* by 2 steps. On Exynos5422/5800 that would
* be: 1600 MHz and 1100 MHz.
*/
map3 {
- trip = <&cpu_alert3>;
+ trip = <&cpu0_alert3>;
cooling-device = <&cpu0 0 2>;
};
map4 {
- trip = <&cpu_alert3>;
+ trip = <&cpu0_alert3>;
cooling-device = <&cpu4 0 2>;
};
-
/*
- * When reaching cpu_alert4, reduce CPU
- * further, down to 600 MHz (11 steps for big,
+ * When reaching cpu0_alert4, reduce CPU
+ * further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
map5 {
- trip = <&cpu_alert4>;
+ trip = <&cpu0_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu0_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu1_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu1_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu1_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu1_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu1_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu1_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu1_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu2_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu2_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu2_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu2_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu2_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu2_alert4>;
cooling-device = <&cpu0 3 7>;
};
map6 {
- trip = <&cpu_alert4>;
- cooling-device = <&cpu4 3 11>;
+ trip = <&cpu2_alert4>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <50000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <60000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_alert2: cpu-alert-2 {
+ temperature = <70000>;
+ hysteresis = <5000>;
+ type = "active";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu3_alert3: cpu-alert-3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ cpu3_alert4: cpu-alert-4 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu3_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ map3 {
+ trip = <&cpu3_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu3_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map5 {
+ trip = <&cpu3_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu3_alert4>;
+ cooling-device = <&cpu4 3 12>;
};
};
};
@@ -151,110 +346,9 @@
status = "okay";
};
-&bus_wcore {
- devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
- <&nocp_mem1_0>, <&nocp_mem1_1>;
- vdd-supply = <&buck3_reg>;
- exynos,saturation-ratio = <100>;
- status = "okay";
-};
-
-&bus_noc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys2 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gen {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_peri {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d_acp {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1_fimd {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gscl_scaler {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&clock_audss {
- assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
- <&clock_audss EXYNOS_MOUT_I2S>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>;
- assigned-clock-parents = <&clock CLK_FIN_PLL>,
- <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-rates = <0>,
- <0>,
- <19200000>;
-};
-
-&cpu0 {
- cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
&hdmi {
status = "okay";
+ ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
@@ -269,246 +363,15 @@
needs-hpd;
};
-&hsi2c_4 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- samsung,s2mps11-acokb-ground;
-
- interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&s2mps11_irq>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vddq_mmc0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "vdd_adc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vddq_mmc2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "vdd_emmc_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ /* used by HDMI DDC */
status = "okay";
+};
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
+&mixer {
+ status = "okay";
};
&mmc_0 {
@@ -530,48 +393,18 @@
vqmmc-supply = <&ldo3_reg>;
};
-&mmc_2 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
-};
-
-&nocp_mem0_0 {
- status = "okay";
-};
-
-&nocp_mem0_1 {
- status = "okay";
-};
-
-&nocp_mem1_0 {
- status = "okay";
-};
-
-&nocp_mem1_1 {
- status = "okay";
-};
-
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
+ power_key: power-key {
+ samsung,pins = "gpx0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- s2mps11_irq: s2mps11-irq {
- samsung,pins = "gpx0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
@@ -584,45 +417,3 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
-
-&tmu_cpu0 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};