diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-duckbill.dts')
-rw-r--r-- | arch/arm/boot/dts/imx28-duckbill.dts | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts deleted file mode 100644 index c666afb12445..000000000000 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ /dev/null @@ -1,147 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de> - * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" - -/ { - model = "I2SE Duckbill"; - compatible = "i2se,duckbill", "fsl,imx28"; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - status = "okay"; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; -}; |