diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-sps1.dts')
-rw-r--r-- | arch/arm/boot/dts/imx28-sps1.dts | 166 |
1 files changed, 0 insertions, 166 deletions
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts deleted file mode 100644 index 43be7a6a769b..000000000000 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ /dev/null @@ -1,166 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - */ - -/dts-v1/; -#include "imx28.dtsi" - -/ { - model = "SchulerControl GmbH, SC SPS 1"; - compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog-gpios@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D00__GPIO_0_0 - MX28_PAD_GPMI_D03__GPIO_0_3 - MX28_PAD_GPMI_D06__GPIO_0_6 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - eeprom: eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - pagesize = <32>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_b>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb0_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb0_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 9 0>; - }; - }; - - leds { - #address-cells = <1>; - #size-cells = <0>; - compatible = "gpio-leds"; - status = "okay"; - - led@1 { - label = "sps1-1:yellow:user"; - gpios = <&gpio0 6 0>; - linux,default-trigger = "heartbeat"; - reg = <0>; - }; - - led@2 { - label = "sps1-2:red:user"; - gpios = <&gpio0 3 0>; - linux,default-trigger = "heartbeat"; - reg = <1>; - }; - - led@3 { - label = "sps1-3:red:user"; - gpios = <&gpio0 0 0>; - default-trigger = "heartbeat"; - reg = <2>; - }; - - }; -}; |