diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-hummingboard.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 368 |
1 files changed, 0 insertions, 368 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi deleted file mode 100644 index 2ffb21dd89f2..000000000000 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Copyright (C) 2013,2014 Russell King - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include <dt-bindings/sound/fsl-imx-audmux.h> - -/ { - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; - }; - - v_3v2: regulator-v-3v2 { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "v_3v2"; - vin-supply = <&v_5v0>; - }; - - v_5v0: regulator-v-5v0 { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-max-microvolt = <5000000>; - regulator-min-microvolt = <5000000>; - regulator-name = "v_5v0"; - }; - - v_sd: regulator-v-sd { - compatible = "regulator-fixed"; - gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_vmmc>; - regulator-boot-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "v_sd"; - startup-delay-us = <1000>; - vin-supply = <&v_3v2>; - }; - - v_usb2: regulator-v-usb2 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-max-microvolt = <5000000>; - regulator-min-microvolt = <5000000>; - regulator-name = "v_usb2"; - vin-supply = <&v_5v0>; - }; - - v_usb1: regulator-v-usb1 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-max-microvolt = <5000000>; - regulator-min-microvolt = <5000000>; - regulator-name = "v_usb1"; - vin-supply = <&v_5v0>; - }; - - audio: sound-sgtl5000 { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board Codec"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sound_codec>; - simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,widgets = - "Microphone", "Headphone Jack", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "MIC_IN", "Headphone Jack", - "Headphone Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - - sound_cpu: simple-audio-card,cpu { - sound-dai = <&ssi1>; - }; - - sound_codec: simple-audio-card,codec { - sound-dai = <&sgtl5000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&audmux { - status = "okay"; - - ssi1 { - fsl,audmux-port = <0>; - fsl,port-config = < - (IMX_AUDMUX_V2_PTCR_SYN | - IMX_AUDMUX_V2_PTCR_TFSEL(4) | - IMX_AUDMUX_V2_PTCR_TCSEL(4) | - IMX_AUDMUX_V2_PTCR_TFSDIR | - IMX_AUDMUX_V2_PTCR_TCLKDIR) - IMX_AUDMUX_V2_PDCR_RXDSEL(4) - >; - }; - - pins5 { - fsl,audmux-port = <4>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN - IMX_AUDMUX_V2_PDCR_RXDSEL(0) - >; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - status = "okay"; - - /* Pro baseboard model */ - rtc@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - - /* Pro baseboard model */ - sgtl5000: codec@a { - clocks = <&clks IMX6QDL_CLK_CKO>; - compatible = "fsl,sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; - #sound-dai-cells = <0>; - reg = <0x0a>; - VDDA-supply = <&v_3v2>; - VDDIO-supply = <&v_3v2>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { - fsl,pins = < - MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset { - fsl,pins = < - MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 - >; - }; - - pinctrl_hummingboard_pwm1: pwm1grp { - fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; - }; - - pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 - MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 - MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 - MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * We want it pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - pinctrl_hummingboard_vmmc: hummingboard-vmmc { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 - >; - }; - }; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; - reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_pwm1>; - status = "okay"; -}; - -&pwm2 { - pinctrl-names = "default"; - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <&v_usb2>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <&v_usb1>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <&v_sd>; - cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&vcc_3v3 { - vin-supply = <&v_3v2>; -}; |