diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 178 |
1 files changed, 0 insertions, 178 deletions
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi deleted file mode 100644 index a78849fd2afa..000000000000 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ /dev/null @@ -1,178 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2017 Toradex AG - */ - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - /* fixed crystal dedicated to mcp2515 */ - clk16m: clk16m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; -}; - -&adc1 { - status = "okay"; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - pwms = <&pwm4 0 5000000 1>; - status = "okay"; -}; - -&ecspi1 { - status = "okay"; - - mcp2515: can@0 { - compatible = "microchip,mcp2515"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_int>; - reg = <0>; - clocks = <&clk16m>; - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <10000000>; - vdd-supply = <®_3v3>; - xceiver-supply = <®_5v0>; - status = "okay"; - }; -}; - -&i2c1 { - status = "okay"; - - /* M41T0M6 real time clock on carrier board */ - m41t0m6: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -/* PWM <A> */ -&pwm4 { - status = "okay"; -}; - -/* PWM <B> */ -&pwm5 { - status = "okay"; -}; - -/* PWM <C> */ -&pwm6 { - status = "okay"; -}; - -/* PWM <D> */ -&pwm7 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbotg1 { - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usbh_vbus>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; - cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - disable-wp; - wakeup-source; - keep-power-in-suspend; - vmmc-supply = <®_3v3>; - vqmmc-supply = <®_sd1_vmmc>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; |