diff options
Diffstat (limited to 'arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 66 |
1 files changed, 12 insertions, 54 deletions
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 3b9df8c82ae3..d6fa74222960 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -34,18 +34,6 @@ }; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -72,14 +60,6 @@ }; }; -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - - status = "okay"; -}; - &adc1 { status = "okay"; }; @@ -88,6 +68,18 @@ status = "okay"; }; +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ + status = "disabled"; +}; + &ecspi3 { status = "okay"; @@ -113,21 +105,6 @@ &i2c4 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiotouch>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc: rtc@68 { compatible = "st,m41t0"; @@ -135,16 +112,6 @@ }; }; -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - &pwm1 { status = "okay"; }; @@ -183,12 +150,3 @@ vmmc-supply = <®_3v3>; status = "okay"; }; - -&iomuxc { - pinctrl_gpiotouch: touchgpios { - fsl,pins = < - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 - MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 - >; - }; -}; |