1 files changed, 0 insertions, 106 deletions
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
deleted file mode 100644
index 712d6042b132..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};