diff options
Diffstat (limited to 'arch/arm/boot/dts/marvell/armada-385-linksys.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/marvell/armada-385-linksys.dtsi | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi new file mode 100644 index 000000000000..4116ed60f709 --- /dev/null +++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree include file for Armada 385 based Linksys boards + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Linksys boards based on Armada 385"; + compatible = "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MiB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + }; + + usb3_1_phy: usb3_1-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&usb3_1_vbus>; + #phy-cells = <0>; + }; + + usb3_1_vbus: usb3_1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_1_vbus_pins>; + regulator-name = "usb3_1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_pins>; + pinctrl-names = "default"; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + button-reset { + label = "Factory Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&gpio_leds_pins>; + pinctrl-names = "default"; + + led-power { + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-sata { + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + }; +}; + +&ahci0 { + status = "okay"; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +ð2 { + status = "okay"; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + expander0: pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + }; +}; + +&nand_controller { + /* 128MiB or 256MiB */ + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nand: nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-keep-config; + nand-on-flash-bbt; + }; +}; + +&mdio { + status = "okay"; + + ethernet-switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan4"; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan3"; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + }; + + ethernet-port@4 { + reg = <4>; + label = "wan"; + }; + + ethernet-port@5 { + reg = <5>; + phy-mode = "sgmii"; + ethernet = <ð2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; +}; + +&pcie2 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; +}; + +&pinctrl { + gpio_keys_pins: gpio-keys-pins { + /* mpp24: wps, mpp29: reset */ + marvell,pins = "mpp24", "mpp29"; + marvell,function = "gpio"; + }; + + gpio_leds_pins: gpio-leds-pins { + /* mpp54: sata, mpp55: power */ + marvell,pins = "mpp54", "mpp55"; + marvell,function = "gpio"; + }; + + usb3_1_vbus_pins: usb3_1-vbus-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; +}; + +&spi0 { + status = "disabled"; +}; + +&uart0 { + /* J10: VCC, NC, RX, NC, TX, GND */ + status = "okay"; +}; + +&usb0 { + /* USB part of the eSATA/USB 2.0 port */ + status = "okay"; +}; + +&usb3_1 { + status = "okay"; + usb-phy = <&usb3_1_phy>; +}; + +&rtc { + /* No crystal connected to the internal RTC */ + status = "disabled"; +}; |