diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/sam9x60.dtsi')
-rw-r--r-- | arch/arm/boot/dts/microchip/sam9x60.dtsi | 70 |
1 files changed, 60 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 291540e5d81e..b075865e6a76 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -97,7 +97,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -186,6 +186,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -196,6 +197,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; dmas = <&dma0 @@ -215,6 +218,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -265,6 +270,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; dmas = <&dma0 @@ -284,6 +291,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -384,6 +393,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -394,6 +404,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -433,6 +445,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -443,6 +456,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -478,7 +493,7 @@ clock-names = "sha_clk"; }; - trng: trng@f0030000 { + trng: rng@f0030000 { compatible = "microchip,sam9x60-trng"; reg = <0xf0030000 0x100>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; @@ -590,6 +605,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -600,6 +616,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -639,6 +657,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -649,6 +668,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -688,6 +709,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -698,6 +720,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -737,6 +761,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -747,6 +772,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "spi_clk"; dmas = <&dma0 @@ -766,6 +793,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -805,6 +834,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -815,6 +845,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "spi_clk"; dmas = <&dma0 @@ -834,6 +866,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -873,6 +907,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -883,6 +918,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "spi_clk"; dmas = <&dma0 @@ -902,6 +939,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -941,6 +980,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -951,6 +991,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "spi_clk"; dmas = <&dma0 @@ -970,6 +1012,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1064,6 +1108,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1074,6 +1119,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1113,6 +1160,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1123,6 +1171,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1223,7 +1273,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ @@ -1236,7 +1286,7 @@ >; pioA: gpio@fffff400 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1247,7 +1297,7 @@ }; pioB: gpio@fffff600 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1259,7 +1309,7 @@ }; pioC: gpio@fffff800 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1270,7 +1320,7 @@ }; pioD: gpio@fffffa00 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1312,7 +1362,7 @@ compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; pit: timer@fffffe40 { @@ -1338,7 +1388,7 @@ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; reg = <0xfffffea8 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; watchdog: watchdog@ffffff80 { |