diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip')
71 files changed, 3433 insertions, 175 deletions
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile index 0c45c8d17468..79cd38fdc7da 100644 --- a/arch/arm/boot/dts/microchip/Makefile +++ b/arch/arm/boot/dts/microchip/Makefile @@ -2,6 +2,7 @@ # Enables support for device-tree overlays DTC_FLAGS_at91-sam9x60_curiosity := -@ DTC_FLAGS_at91-sam9x60ek := -@ +DTC_FLAGS_at91-sam9x75_curiosity := -@ DTC_FLAGS_at91-sama5d27_som1_ek := -@ DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@ DTC_FLAGS_at91-sama5d29_curiosity := -@ @@ -11,6 +12,7 @@ DTC_FLAGS_at91-sama5d2_xplained := -@ DTC_FLAGS_at91-sama5d3_eds := -@ DTC_FLAGS_at91-sama5d3_xplained := -@ DTC_FLAGS_at91-sama5d4_xplained := -@ +DTC_FLAGS_at91-sama7d65_curiosity := -@ DTC_FLAGS_at91-sama7g54_curiosity := -@ DTC_FLAGS_at91-sama7g5ek := -@ dtb-$(CONFIG_SOC_AT91RM9200) += \ @@ -60,6 +62,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ dtb-$(CONFIG_SOC_SAM9X60) += \ at91-sam9x60_curiosity.dtb \ at91-sam9x60ek.dtb +dtb-$(CONFIG_SOC_SAM9X7) += \ + at91-sam9x75_curiosity.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2-2.dtb \ at91-kizbox3-hs.dtb \ @@ -87,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ at91-vinco.dtb +dtb-$(CONFIG_SOC_SAMA7D65) += \ + at91-sama7d65_curiosity.dtb dtb-$(CONFIG_SOC_SAMA7G5) += \ at91-sama7g54_curiosity.dtb \ at91-sama7g5ek.dtb diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts index 742fcf525e1b..302cb872efa1 100644 --- a/arch/arm/boot/dts/microchip/aks-cdu.dts +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts @@ -56,7 +56,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -98,23 +98,27 @@ leds { compatible = "gpio-leds"; - red { + led-red { + label = "red"; gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; - green { + led-green { + label = "green"; gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; - yellow { + led-yellow { + label = "yellow"; gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - blue { + led-blue { + label = "blue"; gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts index 29936bfbeeb7..c11f4f7dac94 100644 --- a/arch/arm/boot/dts/microchip/animeo_ip.dts +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts @@ -136,7 +136,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; @@ -146,23 +146,23 @@ leds { compatible = "gpio-leds"; - power_green { + led-power-green { label = "power_green"; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - power_red { + led-power-red { label = "power_red"; gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; - tx_green { + led-tx-green { label = "tx_green"; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; - tx_red { + led-tx-red { label = "tx_red"; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts index 9dfd5de808d1..8e9e87665045 100644 --- a/arch/arm/boot/dts/microchip/at91-foxg20.dts +++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi index e5e21dff882f..a44d92305dbb 100644 --- a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi @@ -85,7 +85,7 @@ &i2c1 { status = "okay"; - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts index 5ccb3c139592..892dbd8dbbed 100644 --- a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts @@ -114,7 +114,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts index 2fb51b9aca2a..49dc1a4ccb36 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts @@ -105,7 +105,7 @@ status = "okay"; }; - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index c6fbdd29019f..b9ffd9e5faac 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -198,8 +198,6 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index f3cbb675cea4..cdc56b53299d 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -53,17 +53,17 @@ pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; /* Conflict with pwm0. */ - red { + led-red { label = "red"; gpios = <&pioB 11 GPIO_ACTIVE_HIGH>; }; - green { + led-green { label = "green"; gpios = <&pioB 12 GPIO_ACTIVE_HIGH>; }; - blue { + led-blue { label = "blue"; gpios = <&pioB 13 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -207,8 +207,6 @@ status = "okay"; i2c0: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; @@ -254,8 +252,6 @@ status = "okay"; i2c6: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx6_default>; @@ -264,6 +260,37 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; + power-monitor@17 { + compatible = "microchip,pac1934"; + reg = <0x17>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIOM"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_MPU"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + }; + gpio_exp: mcp23008@20 { compatible = "microchip,mcp23008"; reg = <0x20>; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts new file mode 100644 index 000000000000..1a6a909a5043 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ +/dts-v1/; +#include "sam9x7.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Microchip SAM9X75 Curiosity"; + compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-user { + label = "USER"; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_0>; + wakeup-source; + }; + }; + + led-controller { + compatible = "gpio-leds"; + + led_red: led-red { + label = "red"; + gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_red_led_gpio_default>; + }; + + led_green: led-green { + label = "green"; + gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_green_led_gpio_default>; + }; + + led_blue: led-blue { + label = "blue"; + gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_blue_led_gpio_default>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + device_type = "memory"; + }; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu_default>; + status = "okay"; +}; + +&dma0 { + status = "okay"; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + pmic@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vddioddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + }; + + vddcore: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + dcdc4: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-ramp-delay = <3125>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-mode = <4>; + }; + }; + + vldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + + vldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-standby { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&flx7 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c7 { + dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx7_default>; + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "DCDC4"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + }; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&main_xtal { + clock-frequency = <24000000>; +}; + +&pinctrl { + classd { + pinctrl_classd_default: classd-default { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; + }; + }; + + dbgu { + pinctrl_dbgu_default: dbgu-default { + atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + flexcom { + pinctrl_flx6_default: flx6-default { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_flx7_default: flx7-default { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>, + <AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + gpio-keys { + pinctrl_key_gpio_default: key-gpio-default { + atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + i2s { + pinctrl_i2s_default: i2s-default { + atmel,pins = + <AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SCK */ + <AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SWS */ + <AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDIN */ + <AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>, /* I2SDOUT */ + <AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>; /* I2SMCK */ + }; + }; + + led-controller { + pinctrl_red_led_gpio_default: red-led-gpio-default { + atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_green_led_gpio_default: green-led-gpio-default { + atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_blue_led_gpio_default: blue-led-gpio-default { + atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0-default { + atmel,pins = + <AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA2 CK periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA1 CMD periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA0 DAT0 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA3 DAT1 periph A with pullup */ + <AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>, /* PA4 DAT2 periph A with pullup */ + <AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA5 DAT3 periph A with pullup */ + }; + }; +}; /* pinctrl */ + +&poweroff { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; + status = "okay"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&tcb { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&trng { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi index 95ecb7d040a8..8ac85dac5a96 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi @@ -106,7 +106,7 @@ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index f3ffb8f01d8a..45edf6214cf7 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -37,7 +37,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ &pioA PIN_PA27 GPIO_ACTIVE_HIGH @@ -48,7 +48,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi index 4617805c7748..ef11606a82b3 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi @@ -31,6 +31,14 @@ }; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-wilc1000"; reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; @@ -67,9 +75,14 @@ scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - mcp16502@5b { + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index 15239834d886..35a933eec573 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,6 +197,7 @@ &sdmmc0 { bus-width = <4>; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts index 6b02b7bcfd49..7be215781549 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -84,6 +84,14 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -141,9 +149,14 @@ i2c-sda-hold-time-ns = <350>; status = "okay"; - mcp16502@5b { + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; @@ -501,6 +514,7 @@ &sdmmc0 { bus-width = <4>; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; disable-wp; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 999adeca6f33..9fa6f1395aa6 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -78,6 +78,14 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -187,9 +195,45 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; - mcp16502@5b { + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_1"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3_2"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + }; + + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts index 200b20515ab1..10d69f6957cf 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts @@ -47,7 +47,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioA PIN_PB12 GPIO_ACTIVE_HIGH @@ -58,7 +58,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; @@ -231,7 +231,7 @@ scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts index 6680031387e8..7e77a55ed41d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts @@ -46,7 +46,7 @@ status = "okay"; }; - usb1: ohci@400000 { + usb1: usb@400000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ &pioA PIN_PB10 GPIO_ACTIVE_HIGH @@ -57,7 +57,7 @@ status = "okay"; }; - usb2: ehci@500000 { + usb2: usb@500000 { status = "okay"; }; @@ -411,7 +411,7 @@ scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - at24@54 { + eeprom@54 { compatible = "atmel,24c02"; reg = <0x54>; pagesize = <16>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts index 820033727088..d2c43957497d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts @@ -87,7 +87,7 @@ i2c1: i2c@f0018000 { status = "okay"; - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "disabled"; @@ -283,7 +283,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 3 GPIO_ACTIVE_LOW @@ -294,7 +294,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts index 8adf567f2f0f..b9725e400501 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts @@ -22,7 +22,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -31,7 +31,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts index 95d701d13fef..0ecccb9a809d 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts @@ -164,7 +164,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_HIGH @@ -175,7 +175,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts index 20ac775059ca..69107d6cd26c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts @@ -198,7 +198,7 @@ status = "okay"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */ &pioE 11 GPIO_ACTIVE_LOW @@ -207,7 +207,7 @@ status = "okay"; }; - usb2: ehci@600000 { + usb2: usb@600000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts new file mode 100644 index 000000000000..30fdc4f55a3b --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board + * + * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Romain Sioen <romain.sioen@microchip.com> + * + */ +/dts-v1/; +#include "sama7d65-pinfunc.h" +#include "sama7d65.dtsi" +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + model = "Microchip SAMA7D65 Curiosity"; + compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65", + "microchip,sama7d6", "microchip,sama7"; + + aliases { + serial0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; +}; + +&dma0 { + status = "okay"; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6_default>; + status = "okay"; +}; + +&flx10 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; +}; + +&i2c10 { + dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <47000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCPU"; + }; + }; +}; + +&main_xtal { + clock-frequency = <24000000>; +}; + +&pioa { + pinctrl_i2c10_default: i2c10-default{ + pinmux = <PIN_PB19__FLEXCOM10_IO1>, + <PIN_PB20__FLEXCOM10_IO0>; + bias-pull-up; + }; + + pinctrl_sdmmc1_default: sdmmc1-default { + cmd-data { + pinmux = <PIN_PB22__SDMMC1_CMD>, + <PIN_PB24__SDMMC1_DAT0>, + <PIN_PB25__SDMMC1_DAT1>, + <PIN_PB26__SDMMC1_DAT2>, + <PIN_PB27__SDMMC1_DAT3>; + slew-rate = <0>; + bias-disable; + }; + + ck-cd-rstn-vddsel { + pinmux = <PIN_PB23__SDMMC1_CK>, + <PIN_PB21__SDMMC1_RSTN>, + <PIN_PB30__SDMMC1_1V8SEL>, + <PIN_PB29__SDMMC1_CD>, + <PIN_PB28__SDMMC1_WP>; + slew-rate = <0>; + bias-disable; + }; + }; + + pinctrl_uart6_default: uart6-default { + pinmux = <PIN_PD18__FLEXCOM6_IO0>, + <PIN_PD19__FLEXCOM6_IO1>; + bias-disable; + }; +}; + +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; +}; + +&shdwc { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts index 4f609e9e510e..2dec2218f32c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts @@ -72,6 +72,14 @@ device_type = "memory"; reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */ }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -178,6 +186,37 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; + power-monitor@1f { + compatible = "microchip,pac1934"; + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <47000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <47000>; + label = "VDDCPU"; + }; + }; + eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; @@ -189,6 +228,11 @@ pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; regulators { vdd_3v3: VDD_IO { @@ -242,7 +286,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1150000>; + regulator-suspend-microvolt = <1150000>; regulator-mode = <4>; }; @@ -263,7 +307,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1050000>; + regulator-suspend-microvolt = <1050000>; regulator-mode = <4>; }; @@ -280,7 +324,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -296,7 +340,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <3300000>; + regulator-suspend-microvolt = <3300000>; regulator-on-in-suspend; }; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 217e9b96c61e..2543599013b1 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -88,6 +88,14 @@ reg = <0x60000000 0x20000000>; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sama7g5ek audio"; @@ -129,6 +137,7 @@ vref-supply = <&vddout25>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; status = "okay"; }; @@ -236,9 +245,45 @@ i2c-digital-filter-width-ns = <35>; status = "okay"; - mcp16502@5b { + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD3V3"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDIODDR"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCORE"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDCPU"; + }; + }; + + pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; regulators { @@ -293,7 +338,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1150000>; + regulator-suspend-microvolt = <1150000>; regulator-mode = <4>; }; @@ -314,7 +359,7 @@ regulator-state-standby { regulator-on-in-suspend; - regulator-suspend-voltage = <1050000>; + regulator-suspend-microvolt = <1050000>; regulator-mode = <4>; }; @@ -331,7 +376,7 @@ regulator-always-on; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -346,7 +391,7 @@ regulator-max-microvolt = <3700000>; regulator-state-standby { - regulator-suspend-voltage = <1800000>; + regulator-suspend-microvolt = <1800000>; regulator-on-in-suspend; }; @@ -403,6 +448,42 @@ i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; + + eeprom0: eeprom@52 { + compatible = "microchip,24aa025e48"; + reg = <0x52>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom0_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; + + eeprom1: eeprom@53 { + compatible = "microchip,24aa025e48"; + reg = <0x53>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom1_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; }; }; @@ -440,6 +521,8 @@ &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; + nvmem-cells = <&eeprom0_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; ethernet-phy@7 { @@ -457,6 +540,8 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; + nvmem-cells = <&eeprom1_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts index ecbdacf48708..c5fc51667066 100644 --- a/arch/arm/boot/dts/microchip/at91-vinco.dts +++ b/arch/arm/boot/dts/microchip/at91-vinco.dts @@ -162,7 +162,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { num-ports = <3>; atmel,vbus-gpio = <0 &pioE 11 GPIO_ACTIVE_LOW @@ -171,7 +171,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { /* 4G Modem */ status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 16c675e3a890..2a4c83d88733 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -225,7 +225,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < @@ -702,7 +702,7 @@ status = "disabled"; }; - usb0: ohci@300000 { + usb0: usb@300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts index 4624a6f076f8..ce691c4692b9 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts @@ -89,7 +89,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <2>; status = "okay"; }; @@ -127,19 +127,19 @@ leds { compatible = "gpio-leds"; - ds2 { + led-ds2 { label = "green"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; - ds4 { + led-ds4 { label = "yellow"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - ds6 { + led-ds6 { label = "red"; gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index e56d5546554c..ec973f07a961 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -170,7 +170,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = < @@ -742,7 +742,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts index 720c15472c4a..8522a210b484 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts @@ -131,7 +131,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -165,7 +165,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; }; @@ -174,13 +174,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index 307b60658014..0b556c234557 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -77,7 +77,7 @@ #size-cells = <1>; ranges; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -317,7 +317,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts index 045cb253f23a..313bc2797fde 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts @@ -31,7 +31,7 @@ }; ahb { - usb0: ohci@500000 { + usb0: usb@500000 { status = "okay"; }; @@ -192,19 +192,19 @@ leds { compatible = "gpio-leds"; - ds8 { + led-ds8 { label = "ds8"; gpios = <&pioA 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; - ds7 { + led-ds7 { label = "ds7"; gpios = <&pioA 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 23 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index 75d8ff2d12c8..3e9e5ce7c6c8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -167,7 +167,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < @@ -768,7 +768,7 @@ status = "disabled"; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts index ce8baff6a9f4..471ea25296aa 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts @@ -207,7 +207,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH @@ -219,13 +219,13 @@ leds { compatible = "gpio-leds"; - d3 { + led-d3 { label = "d3"; gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - d2 { + led-d2 { label = "d2"; gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; @@ -253,7 +253,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; pagesize = <128>; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts index 6de7a7cd3c07..1e62fd371ddb 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts @@ -14,13 +14,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts index 172af6ff4b18..3e5eab57d1a5 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts @@ -40,13 +40,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi index 565b99e79c52..84a7287107f8 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi @@ -211,7 +211,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -220,7 +220,7 @@ i2c-gpio-0 { status = "okay"; - 24c512@50 { + eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; vcc-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts index af70eb8a3a02..e0c1e8df81b1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts @@ -37,71 +37,71 @@ leds { compatible = "gpio-leds"; - power_blue { + led-power-blue { label = "smartgw:power:blue"; gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_green { + led-power-green { label = "smartgw:power:green"; gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power_red { + led-power-red { label = "smartgw:power:red"; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_blue { + led-radio-blue { label = "smartgw:radio:blue"; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_green { + led-radio-green { label = "smartgw:radio:green"; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_red { + led-radio-red { label = "smartgw:radio:red"; gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_blue { + led-internet-blue { label = "smartgw:internet:blue"; gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_green { + led-internet-green { label = "smartgw:internet:green"; gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_red { + led-internet-red { label = "smartgw:internet:red"; gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - heartbeat { + led-heartbeat { label = "smartgw:heartbeat"; gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pb18 { + led-pb18 { status = "disabled"; }; - pd21 { + led-pd21 { status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 325c63a53118..535e26e05e99 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -190,7 +190,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < @@ -753,7 +753,7 @@ status = "disabled"; }; - trng@fffcc000 { + trng: rng@fffcc000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; @@ -964,7 +964,7 @@ status = "disabled"; }; - usb0: ohci@700000 { + usb0: usb@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -973,7 +973,7 @@ status = "disabled"; }; - usb1: ehci@800000 { + usb1: usb@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts index 071db4f16313..2a31b2f14893 100644 --- a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts @@ -303,14 +303,14 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW &pioD 3 GPIO_ACTIVE_LOW>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 8dc04e9031a6..2f930c39ce4d 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -226,7 +226,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < @@ -748,7 +748,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts index 4c644d4c6be7..b06a54e8e237 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts @@ -180,7 +180,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <1>; atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; @@ -207,19 +207,19 @@ leds { compatible = "gpio-leds"; - d8 { + led-d8 { label = "d8"; gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; - d9 { + led-d9 { label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; - d10 { + led-d10 { label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 7436b5c862b1..1fec9fcc7cd1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -339,7 +339,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index a7456c2191fa..17bdf1e4db01 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -202,7 +202,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* shared pinctrl settings */ @@ -886,7 +886,7 @@ }; }; - usb0: ohci@600000 { + usb0: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -895,7 +895,7 @@ status = "disabled"; }; - usb1: ehci@700000 { + usb1: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi index cdd37f67280b..fb3c19bdfcb6 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi @@ -120,13 +120,13 @@ leds { compatible = "gpio-leds"; - pb18 { + led-pb18 { label = "pb18"; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - pd21 { + led-pd21 { label = "pd21"; gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts index ad7a0850252a..52ccef31b391 100644 --- a/arch/arm/boot/dts/microchip/ethernut5.dts +++ b/arch/arm/boot/dts/microchip/ethernut5.dts @@ -101,7 +101,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts index 6d519d02d190..40c5111c2f0a 100644 --- a/arch/arm/boot/dts/microchip/evk-pro3.dts +++ b/arch/arm/boot/dts/microchip/evk-pro3.dts @@ -45,7 +45,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts index 005c2758e229..2a97e2c0b894 100644 --- a/arch/arm/boot/dts/microchip/mpa1600.dts +++ b/arch/arm/boot/dts/microchip/mpa1600.dts @@ -57,7 +57,7 @@ }; }; - usb0: ohci@300000 { + usb0: usb@300000 { num-ports = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts index c349fd3758a6..2258e62f5864 100644 --- a/arch/arm/boot/dts/microchip/pm9g45.dts +++ b/arch/arm/boot/dts/microchip/pm9g45.dts @@ -139,12 +139,12 @@ }; }; - usb0: ohci@700000 { + usb0: usb@700000 { status = "okay"; num-ports = <2>; }; - usb1: ehci@800000 { + usb1: usb@800000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 291540e5d81e..b075865e6a76 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -97,7 +97,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; @@ -186,6 +186,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -196,6 +197,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; dmas = <&dma0 @@ -215,6 +218,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -265,6 +270,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; dmas = <&dma0 @@ -284,6 +291,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -384,6 +393,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -394,6 +404,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -433,6 +445,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -443,6 +456,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -478,7 +493,7 @@ clock-names = "sha_clk"; }; - trng: trng@f0030000 { + trng: rng@f0030000 { compatible = "microchip,sam9x60-trng"; reg = <0xf0030000 0x100>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; @@ -590,6 +605,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -600,6 +616,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -639,6 +657,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -649,6 +668,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -688,6 +709,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -698,6 +720,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -737,6 +761,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -747,6 +772,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "spi_clk"; dmas = <&dma0 @@ -766,6 +793,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -805,6 +834,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -815,6 +845,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "spi_clk"; dmas = <&dma0 @@ -834,6 +866,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -873,6 +907,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -883,6 +918,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "spi_clk"; dmas = <&dma0 @@ -902,6 +939,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -941,6 +980,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -951,6 +991,8 @@ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "spi_clk"; dmas = <&dma0 @@ -970,6 +1012,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1064,6 +1108,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1074,6 +1119,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1113,6 +1160,7 @@ dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; atmel,use-dma-rx; atmel,use-dma-tx; atmel,fifo-size = <16>; @@ -1123,6 +1171,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1223,7 +1273,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ @@ -1236,7 +1286,7 @@ >; pioA: gpio@fffff400 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1247,7 +1297,7 @@ }; pioB: gpio@fffff600 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1259,7 +1309,7 @@ }; pioC: gpio@fffff800 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1270,7 +1320,7 @@ }; pioD: gpio@fffffa00 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1312,7 +1362,7 @@ compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; pit: timer@fffffe40 { @@ -1338,7 +1388,7 @@ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; reg = <0xfffffea8 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; watchdog: watchdog@ffffff80 { diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi new file mode 100644 index 000000000000..b217a908f525 --- /dev/null +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi @@ -0,0 +1,1258 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family + * + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries + * + * Author: Varshini Rajendran <varshini.rajendran@microchip.com> + */ + +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/at91-usart.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + model = "Microchip SAM9X7 SoC"; + compatible = "microchip,sam9x7"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + reg = <0>; + device_type = "cpu"; + }; + }; + + clocks { + slow_xtal: clock-slowxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: clock-mainxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ahb { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + sdmmc0: mmc@80000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: mmc@90000000 { + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + + apb { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + flx4: flexcom@f0000000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + ranges = <0x0 0xf0000000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + status = "disabled"; + + uart4: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx5: flexcom@f0004000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + ranges = <0x0 0xf0004000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + status = "disabled"; + + uart5: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c5: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + ssc: ssc@f0010000 { + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + ranges = <0x0 0xf0020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + status = "disabled"; + + uart11: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c11: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(22))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx12: flexcom@f0024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + ranges = <0x0 0xf0024000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + status = "disabled"; + + uart12: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c12: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(24))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + pit64b0: timer@f0028000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: crypto@f002c000 { + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + }; + + trng: rng@f0030000 { + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "disabled"; + }; + + aes: crypto@f0034000 { + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + }; + + tdes: crypto@f0038000 { + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + }; + + classd: sound@f003c000 { + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + status = "disabled"; + }; + + pit64b1: timer@f0040000 { + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xf0040000 0x100>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "pclk", "gclk"; + }; + + can0: can@f8000000 { + compatible = "bosch,m_can"; + reg = <0xf8000000 0x100>, <0x300000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>, + <68 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "bosch,m_can"; + reg = <0xf8004000 0x100>, <0x300000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>, + <69 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>; + assigned-clock-rates = <480000000>, <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + tcb: timer@f8008000 { + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon"; + reg = <0xf8008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>; + clock-names = "t0_clk", "gclk", "slow_clk"; + }; + + flx6: flexcom@f8010000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + ranges = <0x0 0xf8010000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx7: flexcom@f8014000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + ranges = <0x0 0xf8014000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + status = "disabled"; + + uart7: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c7: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx8: flexcom@f8018000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + ranges = <0x0 0xf8018000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + status = "disabled"; + + uart8: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c8: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(16))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(17))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx0: flexcom@f801c000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + ranges = <0x0 0xf801c000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + status = "disabled"; + + uart0: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx1: flexcom@f8020000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + ranges = <0x0 0xf8020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + status = "disabled"; + + uart1: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx2: flexcom@f8024000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + ranges = <0x0 0xf8024000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + status = "disabled"; + + uart2: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(4))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(5))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx3: flexcom@f8028000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + ranges = <0x0 0xf8028000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + status = "disabled"; + + uart3: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi3: spi@400 { + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + clock-names = "spi_clk"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + gmac: ethernet@f802c000 { + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem"; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 0 */ + <60 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 1 */ + <61 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 2 */ + <62 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 3 */ + <63 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 4 */ + <64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */ + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>; + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 67>; + assigned-clock-rates = <266666666>; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #pwm-cells = <3>; + status = "disabled"; + }; + + flx9: flexcom@f8040000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + ranges = <0x0 0xf8040000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + status = "disabled"; + + uart9: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c9: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(18))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(19))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@f8044000 { + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + ranges = <0x0 0xf8044000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + status = "disabled"; + + uart10: serial@200 { + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + i2c10: i2c@600 { + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(20))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | + AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(21))>; + dma-names = "tx", "rx"; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x7-aic"; + reg = <0xfffff100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C D */ + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */ + 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000 /* pioB */ + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */ + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */ + >; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: clock-controller@fffffc00 { + compatible = "microchip,sam9x7-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: reset-controller@fffffe00 { + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + poweroff: poweroff@fffffe10 { + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk32k 0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@fffffe20 { + compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt"; + reg = <0xfffffe20 0x20>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + clk32k: clock-controller@fffffe50 { + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index 5f8e297e19ed..dc22fb679333 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -136,7 +136,7 @@ status = "disabled"; }; - usb1: ohci@400000 { + usb1: usb@400000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -145,7 +145,7 @@ status = "disabled"; }; - usb2: ehci@500000 { + usb2: usb@500000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1019,7 +1019,7 @@ }; }; - trng@fc01c000 { + trng: rng@fc01c000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfc01c000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index d4fc0c1dfc10..e95799c17fdb 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -419,7 +419,7 @@ clock-names = "tdes_clk"; }; - trng@f8040000 { + trng: rng@f8040000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xf8040000 0x100>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; @@ -493,7 +493,7 @@ pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1074,7 +1074,7 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1083,7 +1083,7 @@ status = "disabled"; }; - usb2: ehci@700000 { + usb2: usb@700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts index bffd61397cb5..18943b873fff 100644 --- a/arch/arm/boot/dts/microchip/sama5d34ek.dts +++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts @@ -36,7 +36,7 @@ i2c1: i2c@f0018000 { status = "okay"; - 24c256@50 { + eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; pagesize = <64>; diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi index 830a0954ba1b..362806afef44 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi @@ -79,7 +79,7 @@ }; i2c1: i2c@f0018000 { - pmic: act8865@5b { + act8865: pmic@5b { compatible = "active-semi,act8865"; reg = <0x5b>; status = "disabled"; diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi index 3652c9e24124..90da04b84b39 100644 --- a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi @@ -172,7 +172,7 @@ status = "okay"; }; - usb1: ohci@600000 { + usb1: usb@600000 { num-ports = <3>; atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH &pioD 26 GPIO_ACTIVE_LOW @@ -181,7 +181,7 @@ status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 58ceed997889..59a7d557c7cb 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -119,7 +119,7 @@ status = "disabled"; }; - usb1: ohci@500000 { + usb1: usb@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -128,7 +128,7 @@ status = "disabled"; }; - usb2: ehci@600000 { + usb2: usb@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; @@ -658,7 +658,7 @@ status = "disabled"; }; - trng@fc030000 { + trng: rng@fc030000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfc030000 0x100>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; @@ -791,7 +791,7 @@ pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfc068000 0xfc068000 0x100 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h new file mode 100644 index 000000000000..c591f333cacb --- /dev/null +++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h @@ -0,0 +1,947 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#define PINMUX_PIN(no, func, ioset) \ +(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) + +#define PIN_PA0 0 +#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) +#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) +#define PIN_PA0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA0, 2, 1) +#define PIN_PA0__NWER0 PINMUX_PIN(PIN_PA0, 3, 1) + +#define PIN_PA1 1 +#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) +#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) +#define PIN_PA1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA1, 2, 1) +#define PIN_PA1__A21 PINMUX_PIN(PIN_PA1, 3, 1) + +#define PIN_PA2 2 +#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) +#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1) +#define PIN_PA2__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA2, 2, 1) +#define PIN_PA2__A22 PINMUX_PIN(PIN_PA2, 3, 1) + +#define PIN_PA3 3 +#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) +#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1) +#define PIN_PA3__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA3, 2, 1) +#define PIN_PA3__D0 PINMUX_PIN(PIN_PA3, 3, 1) + +#define PIN_PA4 4 +#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) +#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1) +#define PIN_PA4__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA4, 2, 1) +#define PIN_PA4__D1 PINMUX_PIN(PIN_PA4, 3, 1) + +#define PIN_PA5 5 +#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) +#define PIN_PA5__SDMMC0_DAT4 PINMUX_PIN(PIN_PA5, 1, 1) +#define PIN_PA5__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA5, 2, 3) +#define PIN_PA5__D4 PINMUX_PIN(PIN_PA5, 3, 1) +#define PIN_PA5__TCLK4 PINMUX_PIN(PIN_PA5, 6, 3) + +#define PIN_PA6 6 +#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) +#define PIN_PA6__SDMMC0_DAT5 PINMUX_PIN(PIN_PA6, 1, 1) +#define PIN_PA6__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA6, 2, 3) +#define PIN_PA6__D5 PINMUX_PIN(PIN_PA6, 3, 1) +#define PIN_PA6__TIOB4 PINMUX_PIN(PIN_PA6, 6, 3) + +#define PIN_PA7 7 +#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) +#define PIN_PA7__SDMMC0_DAT6 PINMUX_PIN(PIN_PA7, 1, 1) +#define PIN_PA7__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA7, 2, 3) +#define PIN_PA7__D6 PINMUX_PIN(PIN_PA7, 3, 1) +#define PIN_PA7__TIOA4 PINMUX_PIN(PIN_PA7, 6, 3) + +#define PIN_PA8 8 +#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) +#define PIN_PA8__SDMMC0_DAT7 PINMUX_PIN(PIN_PA8, 1, 1) +#define PIN_PA8__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA8, 2, 3) +#define PIN_PA8__D7 PINMUX_PIN(PIN_PA8, 3, 1) +#define PIN_PA8__TIOA5 PINMUX_PIN(PIN_PA8, 6, 3) + +#define PIN_PA9 9 +#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) +#define PIN_PA9__SDMMC0_DAT2 PINMUX_PIN(PIN_PA9, 1, 1) +#define PIN_PA9__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA9, 2, 1) +#define PIN_PA9__D2 PINMUX_PIN(PIN_PA9, 3, 1) +#define PIN_PA9__TIOB5 PINMUX_PIN(PIN_PA9, 6, 3) + +#define PIN_PA10 10 +#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) +#define PIN_PA10__SDMMC0_DAT3 PINMUX_PIN(PIN_PA10, 1, 1) +#define PIN_PA10__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA10, 2, 1) +#define PIN_PA10__D3 PINMUX_PIN(PIN_PA10, 3, 1) +#define PIN_PA10__TCLK5 PINMUX_PIN(PIN_PA10, 6, 3) + +#define PIN_PA11 11 +#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) +#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1) +#define PIN_PA11__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA11, 2, 1) +#define PIN_PA11__NANDRDY PINMUX_PIN(PIN_PA11, 3, 1) +#define PIN_PA11__TIOB3 PINMUX_PIN(PIN_PA11, 6, 3) + +#define PIN_PA12 12 +#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) +#define PIN_PA12__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA12, 2, 1) +#define PIN_PA12__NRD PINMUX_PIN(PIN_PA12, 3, 1) +#define PIN_PA12__PCK0 PINMUX_PIN(PIN_PA12, 4, 1) +#define PIN_PA12__EXT_IRQ0 PINMUX_PIN(PIN_PA12, 5, 1) +#define PIN_PA12__TIOA3 PINMUX_PIN(PIN_PA12, 6, 3) + +#define PIN_PA13 13 +#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) +#define PIN_PA13__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA13, 2, 1) +#define PIN_PA13__NCS0 PINMUX_PIN(PIN_PA13, 3, 1) +#define PIN_PA13__PCK1 PINMUX_PIN(PIN_PA13, 4, 1) +#define PIN_PA13__TCLK3 PINMUX_PIN(PIN_PA13, 6, 3) + +#define PIN_PA14 14 +#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) +#define PIN_PA14__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA14, 1, 1) +#define PIN_PA14__SDMMC0_WP PINMUX_PIN(PIN_PA14, 2, 1) +#define PIN_PA14__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA14, 3, 4) + +#define PIN_PA15 15 +#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) +#define PIN_PA15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA15, 1, 1) +#define PIN_PA15__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA15, 2, 1) +#define PIN_PA15__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA15, 3, 4) + +#define PIN_PA16 16 +#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) +#define PIN_PA16__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA16, 1, 1) +#define PIN_PA16__SDMMCo_CD PINMUX_PIN(PIN_PA16, 2, 1) +#define PIN_PA16__PCK2 PINMUX_PIN(PIN_PA16, 4, 1) +#define PIN_PA16__EXT_IRQ1 PINMUX_PIN(PIN_PA16, 5, 1) + +#define PIN_PA17 17 +#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) +#define PIN_PA17__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA17, 1, 1) + +#define PIN_PA18 18 +#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) +#define PIN_PA18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA18, 1, 1) + +#define PIN_PA19 19 +#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) +#define PIN_PA19__TK0 PINMUX_PIN(PIN_PA19, 1, 1) +#define PIN_PA19__FLEXCOM4_IO5 PINMUX_PIN(PIN_PA19, 3, 1) +#define PIN_PA19__PWML0 PINMUX_PIN(PIN_PA19, 4, 3) + +#define PIN_PA20 20 +#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) +#define PIN_PA20__TD0 PINMUX_PIN(PIN_PA20, 1, 1) +#define PIN_PA20__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA20, 2, 2) +#define PIN_PA20__FLEXCOM4_IO6 PINMUX_PIN(PIN_PA20, 3, 1) +#define PIN_PA20__PWMH0 PINMUX_PIN(PIN_PA20, 4, 3) + +#define PIN_PA21 21 +#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) +#define PIN_PA21__TF0 PINMUX_PIN(PIN_PA21, 1, 1) +#define PIN_PA21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA21, 2, 2) +#define PIN_PA21__PWML1 PINMUX_PIN(PIN_PA21, 4, 3) + +#define PIN_PA22 22 +#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) +#define PIN_PA22__RD0 PINMUX_PIN(PIN_PA22, 1, 1) +#define PIN_PA22__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA22, 2, 2) +#define PIN_PA22__PDMC0_DS1 PINMUX_PIN(PIN_PA22, 3, 1) +#define PIN_PA22__PWMH1 PINMUX_PIN(PIN_PA22, 4, 3) + +#define PIN_PA23 23 +#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) +#define PIN_PA23__RK0 PINMUX_PIN(PIN_PA23, 1, 1) +#define PIN_PA23__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA23, 2, 2) +#define PIN_PA23__PDMC0_CLK PINMUX_PIN(PIN_PA23, 3, 1) +#define PIN_PA23__PWML2 PINMUX_PIN(PIN_PA23, 4, 3) + +#define PIN_PA24 24 +#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) +#define PIN_PA24__RF0 PINMUX_PIN(PIN_PA24, 1, 1) +#define PIN_PA24__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA24, 2, 2) +#define PIN_PA24__PDMC0_DS0 PINMUX_PIN(PIN_PA24, 3, 1) +#define PIN_PA24__PWMH2 PINMUX_PIN(PIN_PA24, 4, 3) + +#define PIN_PA25 25 +#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) +#define PIN_PA25__G0_TXCTL PINMUX_PIN(PIN_PA25, 1, 1) +#define PIN_PA25__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA25, 2, 1) + +#define PIN_PA26 26 +#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) +#define PIN_PA26__G0_TX0 PINMUX_PIN(PIN_PA26, 1, 1) +#define PIN_PA26__FLEXCOM6_IO3 PINMUX_PIN(PIN_PA26, 2, 1) + +#define PIN_PA27 27 +#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) +#define PIN_PA27__G0_TX1 PINMUX_PIN(PIN_PA27, 1, 1) +#define PIN_PA27__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA27, 2, 1) + +#define PIN_PA28 28 +#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) +#define PIN_PA28__G0_RXCTL PINMUX_PIN(PIN_PA28, 1, 1) +#define PIN_PA28__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA28, 2, 1) + +#define PIN_PA29 29 +#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) +#define PIN_PA29__G0_RX0 PINMUX_PIN(PIN_PA29, 1, 1) +#define PIN_PA29__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA29, 2, 1) + +#define PIN_PA30 30 +#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) +#define PIN_PA30__G0_RX1 PINMUX_PIN(PIN_PA30, 1, 1) +#define PIN_PA30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA30, 2, 1) + +#define PIN_PA31 31 +#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) +#define PIN_PA31__G0_MDC PINMUX_PIN(PIN_PA31, 1, 1) +#define PIN_PA31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA31, 2, 1) + +#define PIN_PB0 32 +#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) +#define PIN_PB0__G0_MDIO PINMUX_PIN(PIN_PB0, 1, 1) +#define PIN_PB0__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB0, 2, 2) + +#define PIN_PB1 33 +#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) +#define PIN_PB1__G0_REFCK PINMUX_PIN(PIN_PB1, 1, 2) +#define PIN_PB1__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB1, 2, 1) + +#define PIN_PB2 34 +#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) +#define PIN_PB2__G0_RX2 PINMUX_PIN(PIN_PB2, 1, 1) +#define PIN_PB2__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB2, 2, 1) +#define PIN_PB2__G0_RXER PINMUX_PIN(PIN_PB2, 3, 2) +#define PIN_PB2__RK0 PINMUX_PIN(PIN_PB2, 4, 2) + +#define PIN_PB3 35 +#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) +#define PIN_PB3__G0_RXCK PINMUX_PIN(PIN_PB3, 1, 1) +#define PIN_PB3__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB3, 2, 2) +#define PIN_PB3__TK0 PINMUX_PIN(PIN_PB3, 4, 2) + +#define PIN_PB4 36 +#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) +#define PIN_PB4__G0_TX2 PINMUX_PIN(PIN_PB4, 1, 1) +#define PIN_PB4__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB4, 2, 2) +#define PIN_PB4__TF0 PINMUX_PIN(PIN_PB4, 4, 2) + +#define PIN_PB5 37 +#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) +#define PIN_PB5__G0_TX3 PINMUX_PIN(PIN_PB5, 1, 1) +#define PIN_PB5__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB5, 2, 1) +#define PIN_PB5__TD0 PINMUX_PIN(PIN_PB5, 4, 2) + +#define PIN_PB6 38 +#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) +#define PIN_PB6__G0_RX3 PINMUX_PIN(PIN_PB6, 1, 1) +#define PIN_PB6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB6, 2, 2) +#define PIN_PB6__RD0 PINMUX_PIN(PIN_PB6, 4, 2) + +#define PIN_PB7 39 +#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) +#define PIN_PB7__G0_TSUCOMP PINMUX_PIN(PIN_PB7, 1, 1) +#define PIN_PB7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB7, 2, 2) +#define PIN_PB7__ADTRG PINMUX_PIN(PIN_PB7, 3, 1) +#define PIN_PB7__RF0 PINMUX_PIN(PIN_PB7, 4, 2) + +#define PIN_PB8 40 +#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) +#define PIN_PB8__QSPI0_IO3 PINMUX_PIN(PIN_PB8, 1, 1) +#define PIN_PB8__PCK3 PINMUX_PIN(PIN_PB8, 2, 1) +#define PIN_PB8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB8, 4, 2) + +#define PIN_PB9 41 +#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) +#define PIN_PB9__QSPI0_IO2 PINMUX_PIN(PIN_PB9, 1, 1) +#define PIN_PB9__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB9, 4, 2) +#define PIN_PB9__PWMEXTRG0 PINMUX_PIN(PIN_PB9, 5, 1) + +#define PIN_PB10 42 +#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) +#define PIN_PB10__QSPI0_IO1 PINMUX_PIN(PIN_PB10, 1, 1) +#define PIN_PB10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PB10, 4, 2) +#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 5, 1) + +#define PIN_PB11 43 +#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) +#define PIN_PB11__QSPI0_IO0 PINMUX_PIN(PIN_PB11, 1, 1) +#define PIN_PB11__FLEXCOM2_IO5 PINMUX_PIN(PIN_PB11, 4, 2) +#define PIN_PB11__PWML3 PINMUX_PIN(PIN_PB11, 5, 1) +#define PIN_PB11__TIOB3 PINMUX_PIN(PIN_PB11, 6, 2) + +#define PIN_PB12 44 +#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) +#define PIN_PB12__QSPI0_CS PINMUX_PIN(PIN_PB12, 1, 1) +#define PIN_PB12__FLEXCOM2_IO3 PINMUX_PIN(PIN_PB12, 4, 2) +#define PIN_PB12__PWMFI1 PINMUX_PIN(PIN_PB12, 6, 1) +#define PIN_PB12__TIOA3 PINMUX_PIN(PIN_PB12, 6, 2) + +#define PIN_PB13 45 +#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) +#define PIN_PB13__QSPI0_SCK PINMUX_PIN(PIN_PB13, 1, 1) +#define PIN_PB13__FLEXCOM2_IO2 PINMUX_PIN(PIN_PB13, 4, 2) +#define PIN_PB13__PWMFI0 PINMUX_PIN(PIN_PB13, 5, 1) +#define PIN_PB13__TCLK3 PINMUX_PIN(PIN_PB13, 6, 2) + +#define PIN_PB14 46 +#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) +#define PIN_PB14__QSPI0_SCKN PINMUX_PIN(PIN_PB14, 1, 1) +#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 2, 1) +#define PIN_PB14__I2SMCC0_CK PINMUX_PIN(PIN_PB14, 3, 3) +#define PIN_PB14__FLEXCOM10_IO5 PINMUX_PIN(PIN_PB14, 4, 1) +#define PIN_PB14__PWMH3 PINMUX_PIN(PIN_PB14, 5, 1) +#define PIN_PB14__FLEXCOM2_IO1 PINMUX_PIN(PIN_PB14, 7, 4) + +#define PIN_PB15 47 +#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) +#define PIN_PB15__QSPI0_IO4 PINMUX_PIN(PIN_PB15, 1, 1) +#define PIN_PB15__QSPI1_IO0 PINMUX_PIN(PIN_PB15, 2, 1) +#define PIN_PB15__I2SMCC0_WS PINMUX_PIN(PIN_PB15, 3, 3) +#define PIN_PB15__FLEXCOM10_IO6 PINMUX_PIN(PIN_PB15, 4, 1) +#define PIN_PB15__PWML0 PINMUX_PIN(PIN_PB15, 5, 1) +#define PIN_PB15__TCLK4 PINMUX_PIN(PIN_PB15, 6, 2) +#define PIN_PB15__FLEXCOM2_IO0 PINMUX_PIN(PIN_PB15, 7, 4) + +#define PIN_PB16 48 +#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) +#define PIN_PB16__QSPI0_IO5 PINMUX_PIN(PIN_PB16, 1, 1) +#define PIN_PB16__QSPI1_IO1 PINMUX_PIN(PIN_PB16, 2, 1) +#define PIN_PB16__I2SMCC0_DIN0 PINMUX_PIN(PIN_PB16, 3, 3) +#define PIN_PB16__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB16, 4, 1) +#define PIN_PB16__PWMH0 PINMUX_PIN(PIN_PB16, 5, 1) +#define PIN_PB16__TIOB4 PINMUX_PIN(PIN_PB16, 6, 2) + +#define PIN_PB17 49 +#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) +#define PIN_PB17__QSPI0_IO6 PINMUX_PIN(PIN_PB17, 1, 1) +#define PIN_PB17__QSPI1_IO2 PINMUX_PIN(PIN_PB17, 2, 1) +#define PIN_PB17__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB17, 3, 3) +#define PIN_PB17__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB17, 4, 1) +#define PIN_PB17__PWML1 PINMUX_PIN(PIN_PB17, 5, 1) +#define PIN_PB17__TIOA4 PINMUX_PIN(PIN_PB17, 6, 2) + +#define PIN_PB18 50 +#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) +#define PIN_PB18__QSPI0_IO7 PINMUX_PIN(PIN_PB18, 1, 1) +#define PIN_PB18__QSPI1_IO3 PINMUX_PIN(PIN_PB18, 2, 1) +#define PIN_PB18__I2SMCC0_MCK PINMUX_PIN(PIN_PB18, 3, 3) +#define PIN_PB18__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB18, 4, 1) +#define PIN_PB18__PWMH1 PINMUX_PIN(PIN_PB18, 5, 1) +#define PIN_PB18__TIOA5 PINMUX_PIN(PIN_PB18, 6, 2) + +#define PIN_PB19 51 +#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) +#define PIN_PB19__QSPI0_DQS PINMUX_PIN(PIN_PB19, 1, 1) +#define PIN_PB19__EXT_IRQ1 PINMUX_PIN(PIN_PB19, 2, 2) +#define PIN_PB19__PCK4 PINMUX_PIN(PIN_PB19, 3, 1) +#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 4, 1) +#define PIN_PB19__PWML2 PINMUX_PIN(PIN_PB19, 5, 1) +#define PIN_PB19__TIOB5 PINMUX_PIN(PIN_PB19, 6, 2) + +#define PIN_PB20 52 +#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) +#define PIN_PB20__QSPI0_INT PINMUX_PIN(PIN_PB20, 1, 1) +#define PIN_PB20__QSPI1_CS PINMUX_PIN(PIN_PB20, 2, 1) +#define PIN_PB20__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB20, 4, 1) +#define PIN_PB20__PWMH2 PINMUX_PIN(PIN_PB20, 5, 1) +#define PIN_PB20__TCLK5 PINMUX_PIN(PIN_PB20, 6, 2) + +#define PIN_PB21 53 +#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) +#define PIN_PB21__SDMMC1_RSTN PINMUX_PIN(PIN_PB21, 1, 1) +#define PIN_PB21__FLEXCOM6_IO4 PINMUX_PIN(PIN_PB21, 2, 2) +#define PIN_PB21__TIOB2 PINMUX_PIN(PIN_PB21, 3, 2) +#define PIN_PB21__ADTRG PINMUX_PIN(PIN_PB21, 4, 2) +#define PIN_PB21__EXT_IRQ0 PINMUX_PIN(PIN_PB21, 5, 2) + +#define PIN_PB22 54 +#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) +#define PIN_PB22__SDMMC1_CMD PINMUX_PIN(PIN_PB22, 1, 1) +#define PIN_PB22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB22, 2, 2) +#define PIN_PB22__TCLK2 PINMUX_PIN(PIN_PB22, 3, 2) + +#define PIN_PB23 55 +#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) +#define PIN_PB23__SDMMC1_CK PINMUX_PIN(PIN_PB23, 1, 1) +#define PIN_PB23__FLEXCOM6_IO2 PINMUX_PIN(PIN_PB23, 2, 2) +#define PIN_PB23__TIOA2 PINMUX_PIN(PIN_PB23, 3, 2) + +#define PIN_PB24 56 +#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) +#define PIN_PB24__SDMMC1_DAT0 PINMUX_PIN(PIN_PB24, 1, 1) +#define PIN_PB24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB24, 2, 2) + +#define PIN_PB25 57 +#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) +#define PIN_PB25__SDMMC1_DAT1 PINMUX_PIN(PIN_PB25, 1, 1) +#define PIN_PB25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB25, 2, 2) +#define PIN_PB25__TIOB2 PINMUX_PIN(PIN_PB25, 3, 1) + +#define PIN_PB26 58 +#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) +#define PIN_PB26__SDMMC1_DAT2 PINMUX_PIN(PIN_PB26, 1, 1) +#define PIN_PB26__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB26, 2, 3) +#define PIN_PB26__TCLK2 PINMUX_PIN(PIN_PB26, 3, 1) + +#define PIN_PB27 59 +#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) +#define PIN_PB27__SDMMC1_DAT3 PINMUX_PIN(PIN_PB27, 1, 1) +#define PIN_PB27__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB27, 2, 3) +#define PIN_PB27__TIOA2 PINMUX_PIN(PIN_PB27, 3, 1) + +#define PIN_PB28 60 +#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) +#define PIN_PB28__SDMMC1_WP PINMUX_PIN(PIN_PB28, 1, 1) +#define PIN_PB28__FLEXCOM1_IO0 PINMUX_PIN(PIN_PB28, 3, 3) +#define PIN_PB28__D15 PINMUX_PIN(PIN_PB28, 5, 1) + +#define PIN_PB29 61 +#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) +#define PIN_PB29__SDMMC1_CD PINMUX_PIN(PIN_PB29, 1, 1) +#define PIN_PB29__I2SMCC0_MCK PINMUX_PIN(PIN_PB29, 2, 1) +#define PIN_PB29__FLEXCOM1_IO1 PINMUX_PIN(PIN_PB29, 3, 3) +#define PIN_PB29__D14 PINMUX_PIN(PIN_PB29, 5, 2) + +#define PIN_PB30 62 +#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) +#define PIN_PB30__SDMMC1_1V8SEL PINMUX_PIN(PIN_PB30, 1, 1) +#define PIN_PB30__I2SMCC1_MCK PINMUX_PIN(PIN_PB30, 2, 2) +#define PIN_PB30__FLEXCOM1_IO2 PINMUX_PIN(PIN_PB30, 3, 3) +#define PIN_PB30__TIOA1 PINMUX_PIN(PIN_PB30, 4, 1) +#define PIN_PB30__NCS1 PINMUX_PIN(PIN_PB30, 5, 1) + +#define PIN_PB31 63 +#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) +#define PIN_PB31__PCK7 PINMUX_PIN(PIN_PB31, 1, 2) +#define PIN_PB31__I2SMCC1_DIN1 PINMUX_PIN(PIN_PB31, 2, 1) +#define PIN_PB31__FLEXCOM1_IO3 PINMUX_PIN(PIN_PB31, 3, 3) +#define PIN_PB31__TCLK1 PINMUX_PIN(PIN_PB31, 4, 1) +#define PIN_PB31__NWE PINMUX_PIN(PIN_PB31, 5, 2) + +#define PIN_PC0 64 +#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) +#define PIN_PC0__PCK6 PINMUX_PIN(PIN_PC0, 1, 2) +#define PIN_PC0__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC0, 2, 1) +#define PIN_PC0__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC0, 3, 2) +#define PIN_PC0__TIOB1 PINMUX_PIN(PIN_PC0, 4, 1) +#define PIN_PC0__NWR1 PINMUX_PIN(PIN_PC0, 5, 1) + +#define PIN_PC1 65 +#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) +#define PIN_PC1__PCK5 PINMUX_PIN(PIN_PC1, 1, 1) +#define PIN_PC1__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC1, 3, 2) +#define PIN_PC1__SMCK PINMUX_PIN(PIN_PC1, 5, 1) + +#define PIN_PC2 66 +#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) +#define PIN_PC2__EXT_IRQ0 PINMUX_PIN(PIN_PC2, 1, 3) +#define PIN_PC2__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC2, 3, 2) +#define PIN_PC2__A11 PINMUX_PIN(PIN_PC2, 5, 1) + +#define PIN_PC3 67 +#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) +#define PIN_PC3__SPDIF_RX PINMUX_PIN(PIN_PC3, 1, 2) +#define PIN_PC3__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC3, 3, 2) +#define PIN_PC3__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC3, 4, 2) +#define PIN_PC3__A10 PINMUX_PIN(PIN_PC3, 5, 1) + +#define PIN_PC4 68 +#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) +#define PIN_PC4__SPDIF_TX PINMUX_PIN(PIN_PC4, 1, 2) +#define PIN_PC4__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC4, 3, 2) +#define PIN_PC4__FLEXCOM0_IO3 PINMUX_PIN(PIN_PC4, 4, 2) +#define PIN_PC4__D0 PINMUX_PIN(PIN_PC4, 5, 2) + +#define PIN_PC5 69 +#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) +#define PIN_PC5__I3CC_SDASPUE PINMUX_PIN(PIN_PC5, 1, 1) +#define PIN_PC5__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC5, 2, 1) +#define PIN_PC5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PC5, 4, 2) +#define PIN_PC5__D1 PINMUX_PIN(PIN_PC5, 5, 2) + +#define PIN_PC6 70 +#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) +#define PIN_PC6__I3CC_SCL PINMUX_PIN(PIN_PC6, 1, 1) +#define PIN_PC6__FLEXCOM0_IO1 PINMUX_PIN(PIN_PC6, 4, 2) +#define PIN_PC6__D4 PINMUX_PIN(PIN_PC6, 5, 2) + +#define PIN_PC7 71 +#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) +#define PIN_PC7__I3CC_SDA PINMUX_PIN(PIN_PC7, 1, 1) +#define PIN_PC7__FLEXCOM0_IO0 PINMUX_PIN(PIN_PC7, 4, 2) +#define PIN_PC7__D5 PINMUX_PIN(PIN_PC7, 5, 2) + +#define PIN_PC8 72 +#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) +#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1) +#define PIN_PC8__PDMC0_DS1 PINMUX_PIN(PIN_PC8, 2, 2) +#define PIN_PC8__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC8, 3, 1) +#define PIN_PC8__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC8, 4, 1) +#define PIN_PC8__D6 PINMUX_PIN(PIN_PC8, 5, 2) + +#define PIN_PC9 73 +#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) +#define PIN_PC9__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC9, 1, 1) +#define PIN_PC9__PDMC0_CLK PINMUX_PIN(PIN_PC9, 2, 2) +#define PIN_PC9__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC9, 3, 1) +#define PIN_PC9__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC9, 4, 1) +#define PIN_PC9__D7 PINMUX_PIN(PIN_PC9, 5, 2) + +#define PIN_PC10 74 +#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) +#define PIN_PC10__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC10, 1, 1) +#define PIN_PC10__PDMC0_DS0 PINMUX_PIN(PIN_PC10, 2, 2) +#define PIN_PC10__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC10, 3, 1) +#define PIN_PC10__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC10, 4, 1) +#define PIN_PC10__D2 PINMUX_PIN(PIN_PC10, 5, 2) + +#define PIN_PC11 75 +#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) +#define PIN_PC11__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PC11, 1, 1) +#define PIN_PC11__PDMC1_DS0 PINMUX_PIN(PIN_PC11, 2, 1) +#define PIN_PC11__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC11, 4, 1) +#define PIN_PC10__D3 PINMUX_PIN(PIN_PC10, 5, 2) + +#define PIN_PC12 76 +#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) +#define PIN_PC12__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC12, 1, 1) +#define PIN_PC12__PDMC1_CLK PINMUX_PIN(PIN_PC12, 2, 1) +#define PIN_PC12__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC12, 4, 1) +#define PIN_PC12__A9 PINMUX_PIN(PIN_PC12, 5, 1) + +#define PIN_PC13 77 +#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) +#define PIN_PC13__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC13, 1, 1) +#define PIN_PC13__PDMC1_DS1 PINMUX_PIN(PIN_PC13, 2, 1) +#define PIN_PC13__A8 PINMUX_PIN(PIN_PC13, 5, 1) + +#define PIN_PC14 78 +#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) +#define PIN_PC14__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC14, 1, 1) +#define PIN_PC14__SPDIF_RX PINMUX_PIN(PIN_PC14, 2, 3) +#define PIN_PC14__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC14, 3, 2) +#define PIN_PC14__A7 PINMUX_PIN(PIN_PC14, 5, 1) + +#define PIN_PC15 79 +#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) +#define PIN_PC15__I2SMCC1_WS PINMUX_PIN(PIN_PC15, 1, 1) +#define PIN_PC15__PDMC1_DS1 PINMUX_PIN(PIN_PC15, 2, 2) +#define PIN_PC15__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC15, 3, 2) +#define PIN_PC15__A6 PINMUX_PIN(PIN_PC15, 5, 1) + +#define PIN_PC16 80 +#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) +#define PIN_PC16__I2SMCC1_CK PINMUX_PIN(PIN_PC16, 1, 1) +#define PIN_PC16__PDMC1_CLK PINMUX_PIN(PIN_PC16, 2, 2) +#define PIN_PC16__FLEXCOM1_IO2 PINMUX_PIN(PIN_PC16, 3, 2) +#define PIN_PC16__TIOA1 PINMUX_PIN(PIN_PC16, 4, 2) +#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 5, 1) + +#define PIN_PC17 81 +#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) +#define PIN_PC17__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC17, 1, 1) +#define PIN_PC17__PDMC1_DS0 PINMUX_PIN(PIN_PC17, 2, 2) +#define PIN_PC17__FLEXCOM1_IO3 PINMUX_PIN(PIN_PC17, 3, 2) +#define PIN_PC17__TCLK1 PINMUX_PIN(PIN_PC17, 4, 2) +#define PIN_PC17__A4 PINMUX_PIN(PIN_PC17, 5, 1) + +#define PIN_PC18 82 +#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) +#define PIN_PC18__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC18, 1, 1) +#define PIN_PC18__SPDIF_TX PINMUX_PIN(PIN_PC18, 2, 3) +#define PIN_PC18__FLEXCOM1_IO4 PINMUX_PIN(PIN_PC18, 3, 2) +#define PIN_PC18__TIOB1 PINMUX_PIN(PIN_PC18, 4, 2) +#define PIN_PC18__A3 PINMUX_PIN(PIN_PC18, 5, 1) + +#define PIN_PC19 83 +#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) +#define PIN_PC19__I2SMCC0_WS PINMUX_PIN(PIN_PC19, 1, 1) +#define PIN_PC19__PCK6 PINMUX_PIN(PIN_PC19, 2, 1) +#define PIN_PC19__A2 PINMUX_PIN(PIN_PC19, 5, 1) + +#define PIN_PC20 84 +#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) +#define PIN_PC20__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PC20, 1, 1) +#define PIN_PC20__A1 PINMUX_PIN(PIN_PC20, 5, 1) + +#define PIN_PC21 85 +#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) +#define PIN_PC21__I2SMCC0_CK PINMUX_PIN(PIN_PC21, 1, 1) +#define PIN_PC21__PCK7 PINMUX_PIN(PIN_PC21, 2, 1) +#define PIN_PC21__A0 PINMUX_PIN(PIN_PC21, 5, 1) + +#define PIN_PC22 86 +#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) +#define PIN_PC22__NTRST PINMUX_PIN(PIN_PC22, 1, 1) +#define PIN_PC22__NWAIT PINMUX_PIN(PIN_PC22, 5, 1) + +#define PIN_PC23 87 +#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) +#define PIN_PC23__TCK_SWCLK PINMUX_PIN(PIN_PC23, 1, 1) + +#define PIN_PC24 88 +#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) +#define PIN_PC24__TMS_SWDIO PINMUX_PIN(PIN_PC24, 1, 1) + +#define PIN_PC25 89 +#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) +#define PIN_PC25__TDI PINMUX_PIN(PIN_PC25, 1, 1) + +#define PIN_PC26 90 +#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) +#define PIN_PC26__TDO PINMUX_PIN(PIN_PC26, 1, 1) +#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 5, 1) + +#define PIN_PC27 91 +#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) +#define PIN_PC27__SDMMC2_CMD PINMUX_PIN(PIN_PC27, 1, 1) +#define PIN_PC27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC27, 2, 2) +#define PIN_PC27__TD1 PINMUX_PIN(PIN_PC27, 4, 2) +#define PIN_PC27__D8 PINMUX_PIN(PIN_PC27, 5, 1) + +#define PIN_PC28 92 +#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) +#define PIN_PC28__SDMMC2_CK PINMUX_PIN(PIN_PC28, 1, 1) +#define PIN_PC28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC28, 2, 2) +#define PIN_PC28__TF1 PINMUX_PIN(PIN_PC28, 4, 2) +#define PIN_PC28__D9 PINMUX_PIN(PIN_PC28, 5, 1) + +#define PIN_PC29 93 +#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) +#define PIN_PC29__SDMMC2_DAT0 PINMUX_PIN(PIN_PC29, 1, 1) +#define PIN_PC29__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC29, 2, 2) +#define PIN_PC29__TK1 PINMUX_PIN(PIN_PC29, 4, 2) +#define PIN_PC29__D10 PINMUX_PIN(PIN_PC29, 5, 1) +#define PIN_PC29__TCLK0 PINMUX_PIN(PIN_PC29, 6, 1) + +#define PIN_PC30 94 +#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) +#define PIN_PC30__SDMMC2_DAT1 PINMUX_PIN(PIN_PC30, 1, 1) +#define PIN_PC30__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC30, 2, 2) +#define PIN_PC30__RD1 PINMUX_PIN(PIN_PC30, 4, 2) +#define PIN_PC30__D11 PINMUX_PIN(PIN_PC30, 5, 1) +#define PIN_PC30__TIOA0 PINMUX_PIN(PIN_PC30, 6, 1) + +#define PIN_PC31 95 +#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) +#define PIN_PC31__SDMMC2_DAT2 PINMUX_PIN(PIN_PC31, 1, 1) +#define PIN_PC31__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC31, 2, 2) +#define PIN_PC31__PCK0 PINMUX_PIN(PIN_PC31, 3, 2) +#define PIN_PC31__RK1 PINMUX_PIN(PIN_PC31, 4, 2) +#define PIN_PC31__D12 PINMUX_PIN(PIN_PC31, 5, 1) +#define PIN_PC31__TIOB0 PINMUX_PIN(PIN_PC31, 6, 1) + +#define PIN_PD0 96 +#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) +#define PIN_PD0__SDMMC2_DAT3 PINMUX_PIN(PIN_PD0, 1, 1) +#define PIN_PD0__PCK1 PINMUX_PIN(PIN_PD0, 3, 2) +#define PIN_PD0__RF1 PINMUX_PIN(PIN_PD0, 4, 2) +#define PIN_PD0__D13 PINMUX_PIN(PIN_PD0, 5, 1) + +#define PIN_PD1 97 +#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) +#define PIN_PD1__SDMMC2_WP PINMUX_PIN(PIN_PD1, 1, 1) +#define PIN_PD1__FLEXCOM1_IO5 PINMUX_PIN(PIN_PD1, 2, 1) +#define PIN_PD1__LCDC_HSYNC PINMUX_PIN(PIN_PD1, 3, 2) +#define PIN_PD1__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD1, 4, 3) + +#define PIN_PD2 98 +#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) +#define PIN_PD2__SDMMC2_CD PINMUX_PIN(PIN_PD2, 1, 1) +#define PIN_PD2__FLEXCOM1_IO6 PINMUX_PIN(PIN_PD2, 2, 1) +#define PIN_PD2__LCDC_VSYNC PINMUX_PIN(PIN_PD2, 3, 2) +#define PIN_PD2__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD2, 4, 3) + +#define PIN_PD3 99 +#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) +#define PIN_PD3__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD3, 1, 1) +#define PIN_PD3__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD3, 2, 1) +#define PIN_PD3__TIOA0 PINMUX_PIN(PIN_PD3, 3, 2) +#define PIN_PD3__FLEXCOM3_IO2 PINMUX_PIN(PIN_PD3, 4, 3) +#define PIN_PD3__EXT_IRQ1 PINMUX_PIN(PIN_PD3, 5, 3) + +#define PIN_PD4 100 +#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) +#define PIN_PD4__LCDC_HSYNC PINMUX_PIN(PIN_PD4, 1, 1) +#define PIN_PD4__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD4, 2, 1) +#define PIN_PD4__TIOB0 PINMUX_PIN(PIN_PD4, 3, 2) +#define PIN_PD4__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD4, 4, 3) + +#define PIN_PD5 101 +#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) +#define PIN_PD5__LCDC_VSYNC PINMUX_PIN(PIN_PD5, 1, 1) +#define PIN_PD5__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD5, 2, 1) +#define PIN_PD5__TCLK0 PINMUX_PIN(PIN_PD5, 3, 2) +#define PIN_PD5__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD5, 4, 3) + +#define PIN_PD6 102 +#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) +#define PIN_PD6__LCDC_PWM PINMUX_PIN(PIN_PD6, 1, 1) +#define PIN_PD6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD6, 2, 1) +#define PIN_PD6__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD6, 4, 3) + +#define PIN_PD7 103 +#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) +#define PIN_PD7__LCDC_DISP PINMUX_PIN(PIN_PD7, 1, 1) +#define PIN_PD7__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD7, 2, 1) +#define PIN_PD7__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD7, 4, 3) + +#define PIN_PD8 104 +#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) +#define PIN_PD8__CANTX0 PINMUX_PIN(PIN_PD8, 1, 1) +#define PIN_PD8__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD8, 2, 1) + +#define PIN_PD9 105 +#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) +#define PIN_PD9__CANRX0 PINMUX_PIN(PIN_PD9, 1, 1) +#define PIN_PD9__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD9, 2, 1) + +#define PIN_PD10 106 +#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) +#define PIN_PD10__CANTX1 PINMUX_PIN(PIN_PD10, 1, 1) +#define PIN_PD10__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD10, 2, 1) +#define PIN_PD10__TIOA1 PINMUX_PIN(PIN_PD10, 3, 3) + +#define PIN_PD11 107 +#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) +#define PIN_PD11__CANRX1 PINMUX_PIN(PIN_PD11, 1, 1) +#define PIN_PD11__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD11, 2, 1) +#define PIN_PD11__TCLK1 PINMUX_PIN(PIN_PD11, 3, 3) + +#define PIN_PD12 108 +#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) +#define PIN_PD12__CANTX2 PINMUX_PIN(PIN_PD12, 1, 1) +#define PIN_PD12__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD12, 2, 1) +#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 3, 3) +#define PIN_PD12__PCK2 PINMUX_PIN(PIN_PD12, 4, 2) +#define PIN_PD12__FLEXCOM3_IO3 PINMUX_PIN(PIN_PD12, 5, 3) + +#define PIN_PD13 109 +#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) +#define PIN_PD13__CANRX2 PINMUX_PIN(PIN_PD13, 1, 1) +#define PIN_PD13__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD13, 2, 1) +#define PIN_PD13__TIOA2 PINMUX_PIN(PIN_PD13, 3, 3) +#define PIN_PD13__PCK3 PINMUX_PIN(PIN_PD13, 4, 2) + +#define PIN_PD14 110 +#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) +#define PIN_PD14__CANTX3 PINMUX_PIN(PIN_PD14, 1, 1) +#define PIN_PD14__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD14, 2, 1) +#define PIN_PD14__TIOB2 PINMUX_PIN(PIN_PD14, 3, 3) + +#define PIN_PD15 111 +#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) +#define PIN_PD15__CANRX3 PINMUX_PIN(PIN_PD15, 1, 1) +#define PIN_PD15__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD15, 2, 1) +#define PIN_PD15__TCLK2 PINMUX_PIN(PIN_PD15, 3, 3) + +#define PIN_PD16 112 +#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) +#define PIN_PD16__CANTX4 PINMUX_PIN(PIN_PD16, 1, 1) +#define PIN_PD16__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD16, 2, 1) + +#define PIN_PD17 113 +#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) +#define PIN_PD17__CANRX4 PINMUX_PIN(PIN_PD17, 1, 1) +#define PIN_PD17__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD17, 2, 1) + +#define PIN_PD18 114 +#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) +#define PIN_PD18__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD18, 2, 4) +#define PIN_PD18__CANTX1 PINMUX_PIN(PIN_PD18, 3, 2) +#define PIN_PD18__PCK4 PINMUX_PIN(PIN_PD18, 4, 2) + +#define PIN_PD19 115 +#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) +#define PIN_PD19__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD19, 2, 4) +#define PIN_PD19__CANRX1 PINMUX_PIN(PIN_PD19, 3, 2) +#define PIN_PD19__PCK2 PINMUX_PIN(PIN_PD19, 4, 3) + +#define PIN_PD20 116 +#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) +#define PIN_PD20__PFLEXCOM6_IO2 PINMUX_PIN(PIN_PD20, 2, 4) +#define PIN_PD20__I2SMCC1_MCK PINMUX_PIN(PIN_PD20, 3, 2) +#define PIN_PD20__PCK3 PINMUX_PIN(PIN_PD20, 4, 3) + +#define PIN_PD21 117 +#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) +#define PIN_PD21__G1_TXCTL PINMUX_PIN(PIN_PD21, 1, 2) +#define PIN_PD21__FLEXCOM6_IO2 PINMUX_PIN(PIN_PD21, 2, 3) +#define PIN_PD21__TK1 PINMUX_PIN(PIN_PD21, 3, 1) + +#define PIN_PD22 118 +#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) +#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 1, 1) +#define PIN_PD22__FLEXCOM6_IO3 PINMUX_PIN(PIN_PD22, 2, 3) +#define PIN_PD22__TF1 PINMUX_PIN(PIN_PD22, 3, 1) + +#define PIN_PD23 119 +#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) +#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 1, 1) +#define PIN_PD23__FLEXCOM6_IO4 PINMUX_PIN(PIN_PD23, 2, 3) +#define PIN_PD23__TD1 PINMUX_PIN(PIN_PD23, 3, 1) + +#define PIN_PD24 120 +#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) +#define PIN_PD24__G1_RXCTL PINMUX_PIN(PIN_PD24, 1, 1) +#define PIN_PD24__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD24, 2, 3) +#define PIN_PD24__RD1 PINMUX_PIN(PIN_PD24, 3, 1) +#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 5, 3) + +#define PIN_PD25 121 +#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) +#define PIN_PD25__G1_MDC PINMUX_PIN(PIN_PD25, 1, 1) +#define PIN_PD25__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD25, 2, 3) +#define PIN_PD25__RK1 PINMUX_PIN(PIN_PD25, 3, 1) +#define PIN_PD25__PDMC0_CLK PINMUX_PIN(PIN_PD25, 5, 3) + +#define PIN_PD26 122 +#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) +#define PIN_PD26__G1_MDIO PINMUX_PIN(PIN_PD26, 1, 1) +#define PIN_PD26__FLEXCOM7_IO4 PINMUX_PIN(PIN_PD26, 2, 2) +#define PIN_PD26__RF1 PINMUX_PIN(PIN_PD26, 3, 1) +#define PIN_PD26__I2SMCC1_DIN2 PINMUX_PIN(PIN_PD26, 4, 2) +#define PIN_PD26__PDMC0_DS0 PINMUX_PIN(PIN_PD26, 5, 3) + +#define PIN_PD27 123 +#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) +#define PIN_PD27__G1_RX0 PINMUX_PIN(PIN_PD27, 1, 1) +#define PIN_PD27__FLEXCOM7_IO0 PINMUX_PIN(PIN_PD27, 2, 2) +#define PIN_PD27__SPDIF_RX PINMUX_PIN(PIN_PD27, 3, 1) +#define PIN_PD27__I2SMCC1_DIN3 PINMUX_PIN(PIN_PD27, 4, 2) + +#define PIN_PD28 124 +#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) +#define PIN_PD28__G1_RX1 PINMUX_PIN(PIN_PD28, 1, 1) +#define PIN_PD28__FLEXCOM7_IO1 PINMUX_PIN(PIN_PD28, 2, 2) +#define PIN_PD28__SPDIF_TX PINMUX_PIN(PIN_PD28, 3, 1) +#define PIN_PD28__I2SMCC1_DIN1 PINMUX_PIN(PIN_PD28, 4, 2) + +#define PIN_PD29 125 +#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) +#define PIN_PD29__G1_REFCK PINMUX_PIN(PIN_PD29, 1, 2) +#define PIN_PD29__FLEXCOM7_IO2 PINMUX_PIN(PIN_PD29, 2, 2) +#define PIN_PD29__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PD29, 3, 2) + +#define PIN_PD30 126 +#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) +#define PIN_PD30__G1_RX2 PINMUX_PIN(PIN_PD30, 1, 1) +#define PIN_PD30__FLEXCOM7_IO3 PINMUX_PIN(PIN_PD30, 2, 2) +#define PIN_PD30__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PD30, 3, 2) +#define PIN_PD30__PDMC1_DS1 PINMUX_PIN(PIN_PD30, 4, 3) +#define PIN_PD30__G1_RXER PINMUX_PIN(PIN_PD30, 5, 2) + +#define PIN_PD31 127 +#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) +#define PIN_PD31__G1_RX3 PINMUX_PIN(PIN_PD31, 1, 1) +#define PIN_PD31__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD31, 2, 2) +#define PIN_PD31__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PD31, 3, 3) +#define PIN_PD31__PDMC1_DS0 PINMUX_PIN(PIN_PD31, 4, 3) + +#define PIN_PE0 128 +#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0) +#define PIN_PE0__G1_TX2 PINMUX_PIN(PIN_PE0, 1, 1) +#define PIN_PE0__FLEXCOM5_IO2 PINMUX_PIN(PIN_PE0, 2, 2) +#define PIN_PE0__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE0, 3, 2) +#define PIN_PE0__PDMC1_CLK PINMUX_PIN(PIN_PE0, 4, 3) + +#define PIN_PE1 129 +#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0) +#define PIN_PE1__G1_TX3 PINMUX_PIN(PIN_PE1, 1, 1) +#define PIN_PE1__FLEXCOM5_IO3 PINMUX_PIN(PIN_PE1, 2, 2) +#define PIN_PE1__I2SMCC1_WS PINMUX_PIN(PIN_PE1, 3, 2) +#define PIN_PE1__PDMC0_DS1 PINMUX_PIN(PIN_PE1, 4, 4) + +#define PIN_PE2 130 +#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0) +#define PIN_PE2__G1_RXCK PINMUX_PIN(PIN_PE2, 1, 1) +#define PIN_PE2__FLEXCOM5_IO1 PINMUX_PIN(PIN_PE2, 2, 2) +#define PIN_PE2__I2SMCC1_CK PINMUX_PIN(PIN_PE2, 3, 2) +#define PIN_PE2__PDMC0_CLK PINMUX_PIN(PIN_PE2, 4, 4) + +#define PIN_PE3 131 +#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0) +#define PIN_PE3__G1_TSUCOMP PINMUX_PIN(PIN_PE3, 1, 1) +#define PIN_PE3__FLEXCOM5_IO0 PINMUX_PIN(PIN_PE3, 2, 2) +#define PIN_PE3__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PE3, 3, 2) +#define PIN_PE3__PDMC0_DS0 PINMUX_PIN(PIN_PE3, 4, 4) + +#define PIN_PE4 132 +#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0) +#define PIN_PE4__LCDC_DAT0 PINMUX_PIN(PIN_PE4, 1, 1) +#define PIN_PE4__FLEXCOM2_IO2 PINMUX_PIN(PIN_PE4, 2, 1) +#define PIN_PE4__PWML0 PINMUX_PIN(PIN_PE4, 3, 2) +#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 4, 1) +#define PIN_PE4__I2SMCC0_DIN1 PINMUX_PIN(PIN_PE4, 5, 2) + +#define PIN_PE5 133 +#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0) +#define PIN_PE5__LCDC_DAT1 PINMUX_PIN(PIN_PE5, 1, 1) +#define PIN_PE5__FLEXCOM2_IO3 PINMUX_PIN(PIN_PE5, 2, 1) +#define PIN_PE5__PWMH0 PINMUX_PIN(PIN_PE5, 3, 2) +#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 4, 1) +#define PIN_PE5__I2SMCC0_DIN2 PINMUX_PIN(PIN_PE5, 5, 2) + +#define PIN_PE6 134 +#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0) +#define PIN_PE6__LCDC_DAT2 PINMUX_PIN(PIN_PE6, 1, 1) +#define PIN_PE6__FLEXCOM2_IO4 PINMUX_PIN(PIN_PE6, 2, 1) +#define PIN_PE6__PWML1 PINMUX_PIN(PIN_PE6, 3, 2) +#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 4, 1) +#define PIN_PE6__I2SMCC0_DIN3 PINMUX_PIN(PIN_PE6, 5, 2) + +#define PIN_PE7 135 +#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0) +#define PIN_PE7__LCDC_DAT3 PINMUX_PIN(PIN_PE7, 1, 1) +#define PIN_PE7__FLEXCOM2_IO5 PINMUX_PIN(PIN_PE7, 2, 1) +#define PIN_PE7__PWMH1 PINMUX_PIN(PIN_PE7, 3, 2) +#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 4, 1) +#define PIN_PE7__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PE7, 5, 2) + +#define PIN_PE8 136 +#define PIN_PE8__GPIO PINMUX_PIN(PIN_PE8, 0, 0) +#define PIN_PE8__LCDC_DAT4 PINMUX_PIN(PIN_PE8, 1, 1) +#define PIN_PE8__FLEXCOM2_IO0 PINMUX_PIN(PIN_PE8, 2, 1) +#define PIN_PE8__PWML2 PINMUX_PIN(PIN_PE8, 3, 2) +#define PIN_PE8__TIOB4 PINMUX_PIN(PIN_PE8, 4, 1) +#define PIN_PE8__I2SMCC0_CK PINMUX_PIN(PIN_PE8, 5, 2) + +#define PIN_PE9 137 +#define PIN_PE9__GPIO PINMUX_PIN(PIN_PE9, 0, 0) +#define PIN_PE9__LCDC_DAT5 PINMUX_PIN(PIN_PE9, 1, 1) +#define PIN_PE9__FLEXCOM2_IO1 PINMUX_PIN(PIN_PE9, 2, 1) +#define PIN_PE9__PWMH2 PINMUX_PIN(PIN_PE9, 3, 2) +#define PIN_PE9__TCLK4 PINMUX_PIN(PIN_PE9, 4, 1) +#define PIN_PE9__I2SMCC0_WS PINMUX_PIN(PIN_PE9, 5, 2) + +#define PIN_PE10 138 +#define PIN_PE10__GPIO PINMUX_PIN(PIN_PE10, 0, 0) +#define PIN_PE10__LCDC_DAT6 PINMUX_PIN(PIN_PE10, 1, 1) +#define PIN_PE10__FLEXCOM2_IO6 PINMUX_PIN(PIN_PE10, 2, 1) +#define PIN_PE10__PWML3 PINMUX_PIN(PIN_PE10, 3, 2) +#define PIN_PE10__TIOA5 PINMUX_PIN(PIN_PE10, 4, 1) +#define PIN_PE10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PE10, 5, 2) + +#define PIN_PE11 139 +#define PIN_PE11__GPIO PINMUX_PIN(PIN_PE11, 0, 0) +#define PIN_PE11__LCDC_DAT7 PINMUX_PIN(PIN_PE11, 1, 1) +#define PIN_PE11__PWMH3 PINMUX_PIN(PIN_PE11, 3, 2) +#define PIN_PE11__TIOB5 PINMUX_PIN(PIN_PE11, 4, 1) +#define PIN_PE11__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PE11, 5, 2) + +#define PIN_PE12 140 +#define PIN_PE12__GPIO PINMUX_PIN(PIN_PE12, 0, 0) +#define PIN_PE12__LCDC_DEN PINMUX_PIN(PIN_PE12, 1, 1) +#define PIN_PE12__PCK3 PINMUX_PIN(PIN_PE12, 2, 4) +#define PIN_PE12__PWMEXTRG0 PINMUX_PIN(PIN_PE12, 3, 2) +#define PIN_PE12__TCLK5 PINMUX_PIN(PIN_PE12, 4, 1) +#define PIN_PE12__I2SMCC0_DIN0 PINMUX_PIN(PIN_PE12, 5, 2) + +#define PIN_PE13 141 +#define PIN_PE13__GPIO PINMUX_PIN(PIN_PE13, 0, 0) +#define PIN_PE13__LCDC_PCK PINMUX_PIN(PIN_PE13, 1, 1) +#define PIN_PE13__PCK4 PINMUX_PIN(PIN_PE13, 2, 3) +#define PIN_PE13__PWMEXTRG1 PINMUX_PIN(PIN_PE13, 3, 2) +#define PIN_PE13__I2SMCC0DOUT0 PINMUX_PIN(PIN_PE13, 5, 2) diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi new file mode 100644 index 000000000000..b6710ccd4c36 --- /dev/null +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC + * + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Ryan Wanner <Ryan.Wanner@microchip.com> + * + */ + +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/mfd/at91-usart.h> + +/ { + model = "Microchip SAMA7D65 family SoC"; + compatible = "microchip,sama7d65"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + reg = <0x0>; + device_type = "cpu"; + clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; + clock-names = "cpu"; + }; + }; + + clocks { + main_xtal: clock-mainxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + slow_xtal: clock-slowxtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + sfrbu: sfr@e0008000 { + compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; + reg = <0xe0008000 0x20>; + }; + + pioa: pinctrl@e0014000 { + compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl"; + reg = <0xe0014000 0x800>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pmc: clock-controller@e0018000 { + compatible = "microchip,sama7d65-pmc", "syscon"; + reg = <0xe0018000 0x200>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + ps_wdt: watchdog@e001d000 { + compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt"; + reg = <0xe001d000 0x30>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + + reset_controller: reset-controller@e001d100 { + compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc"; + reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + + shdwc: poweroff@e001d200 { + compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d200 0x20>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + clk32k: clock-controller@e001d500 { + compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc"; + reg = <0xe001d500 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + rtc: rtc@e001d800 { + compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d800 0x30>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 1>; + }; + + chipid@e0020000 { + compatible = "microchip,sama7d65-chipid"; + reg = <0xe0020000 0x8>; + }; + + dma2: dma-controller@e1200000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1200000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "dma_clk"; + dma-requests = <0>; + status = "disabled"; + }; + + sdmmc1: mmc@e1208000 { + compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci"; + reg = <0xe1208000 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 76>; + assigned-clock-rates = <200000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>; + status = "disabled"; + }; + + dma0: dma-controller@e1610000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1610000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + dma1: dma-controller@e1614000 { + compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; + reg = <0xe1614000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + pit64b0: timer@e1800000 { + compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1800000 0x100>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>; + clock-names = "pclk", "gclk"; + }; + + pit64b1: timer@e1804000 { + compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1804000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>; + clock-names = "pclk", "gclk"; + }; + + flx6: flexcom@e2020000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2020000 0x200>; + ranges = <0x0 0xe2020000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + status = "disabled"; + + uart6: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "usart"; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx10: flexcom@e2824000 { + compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; + reg = <0xe2824000 0x200>; + ranges = <0x0 0xe2824000 0x800>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + i2c10: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@e8c11000 { + compatible = "arm,cortex-a7-gic"; + reg = <0xe8c11000 0x1000>, + <0xe8c12000 0x2000>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + }; + }; +}; diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 75778be126a3..17bcdcf0cf4a 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -272,7 +272,7 @@ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; clk32k: clock-controller@e001d050 { diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts index ef6d586ce887..f0f2a787d669 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260.dts +++ b/arch/arm/boot/dts/microchip/tny_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board + * tny_a9260.dts - Device Tree file for Calao TNY A9260 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi index 70e5635c78ed..4d4377f51bec 100644 --- a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board + * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts index 62b7d9f9a926..3dd48b3e06da 100644 --- a/arch/arm/boot/dts/microchip/tny_a9263.dts +++ b/arch/arm/boot/dts/microchip/tny_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts index 118d766a1265..cebd5696a2c1 100644 --- a/arch/arm/boot/dts/microchip/tny_a9g20.dts +++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board + * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts index 66f8da89007d..e7f7b259ccf3 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260.dts +++ b/arch/arm/boot/dts/microchip/usb_a9260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9260.dts - Device Tree file for Caloa USB A9260 board + * usb_a9260.dts - Device Tree file for Calao USB A9260 board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi index 8744b5f6f792..8c3530638c6d 100644 --- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a926x.dts - Device Tree file for Caloa USB A926x board + * usb_a926x.dts - Device Tree file for Calao USB A926x board * * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -111,7 +111,7 @@ }; }; - usb0: ohci@500000 { + usb0: usb@500000 { num-ports = <2>; status = "okay"; }; @@ -122,17 +122,14 @@ user_led { label = "user_led"; - gpios = <&pioB 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts index 45745915b2e1..60d7936dc562 100644 --- a/arch/arm/boot/dts/microchip/usb_a9263.dts +++ b/arch/arm/boot/dts/microchip/usb_a9263.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * usb_a9263.dts - Device Tree file for Caloa USB A9293 board + * usb_a9263.dts - Device Tree file for Calao USB A9293 board * * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -9,7 +9,7 @@ / { model = "Calao USB A9263"; - compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; + compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9"; chosen { bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; @@ -139,7 +139,7 @@ }; }; - usb0: ohci@a00000 { + usb0: usb@a00000 { num-ports = <2>; status = "okay"; }; @@ -151,16 +151,13 @@ user_led { label = "user_led"; gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; }; }; gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user-pb { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi index 08d58081201a..5b1d80c0ab26 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi @@ -65,28 +65,26 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb1 { + button-user-pb1 { label = "user_pb1"; gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; - user_pb2 { + button-user-pb2 { label = "user_pb2"; gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; - user_pb3 { + button-user-pb3 { label = "user_pb3"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; - user_pb4 { + button-user-pb4 { label = "user_pb4"; gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts index 2f667b083e81..a2f748141d4b 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi index 7d10b36db1ee..f1946e0996b7 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board + * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board * * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts index f65712015d40..4d104797176c 100644 --- a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts +++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board + * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board * * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ @@ -16,7 +16,7 @@ spi1: spi@fffcc000 { cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; status = "okay"; - mmc-slot@0 { + mmc@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; |