1 files changed, 97 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
new file mode 100644
index 000000000000..b1c1e7c759b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+	lvds-decoder {
+		compatible = "ti,sn65lvds94", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_rgb_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		/* LVDS pins only have pin mux configuration */
+		fsl,pins = <
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+		>;
+	};
+
+	pinctrl_spi_gpio: spigrp {
+		fsl,pins = <
+			MX53_PAD_EIM_A22__GPIO2_16		0x1f4
+			MX53_PAD_EIM_A21__GPIO2_17		0x1f4
+			MX53_PAD_EIM_A16__GPIO2_22		0x1f4
+			MX53_PAD_EIM_A18__GPIO2_20		0x1f4
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&panel_rgb_in {
+	remote-endpoint = <&lvds_decoder_out>;
+};
+
+&spi_ts {
+	pinctrl-0 = <&pinctrl_spi_gpio>;
+	pinctrl-names = "default";
+
+	sck-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	miso-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	mosi-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+	interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_BOTH>;
+	pendown-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+};