diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 491 |
1 files changed, 491 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts new file mode 100644 index 000000000000..95b49fc83f7b --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -0,0 +1,491 @@ +/* + * Copyright 2013 CompuLab Ltd. + * + * Author: Valentin Raevsky <valentin@compulab.co.il> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6q.dtsi" + +/ { + model = "CompuLab CM-FX6"; + compatible = "compulab,cm-fx6", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat-led { + label = "Heartbeat"; + gpios = <&gpio2 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + awnh387_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwrseq>; + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + compatible = "regulator-fixed"; + regulator-name = "regulator-pcie-power-on-gpio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound-analog { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board analog audio"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "MICIN", "Mic Bias", + "Mic Bias", "Mic Jack"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + sound_master: simple-audio-card,cpu { + sound-dai = <&ssi2>; + system-clock-frequency = <2822400>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8731>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(3)) + IMX_AUDMUX_V2_PDCR_RXDSEL(3) + >; + }; + + mux-audmux4 { + fsl,audmux-port = <3>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(1) | + IMX_AUDMUX_V2_PTCR_RCLKDIR | + IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(1)) + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; +}; + +&cpu0 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu1 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu2 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu3 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&ecspi1 { + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + wm8731: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x17059 + MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x17059 + MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x17059 + MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x17059 + MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + >; + }; + + pinctrl_pwrseq: pwrseqgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie_power_on_gpio>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi2 { + assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>, + <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <786432000>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + mmc-pwrseq = <&awnh387_pwrseq>; + non-removable; + /* + * If the OS probes the Bluetooth AMP function advertised on this bus + * but the firmware in place does not support it, the WiFi/BT module + * gets unresponsive. + * Users who configured their OS properly can enable this node to gain + * WiFi and/or plain Bluetooth support. + */ + status = "disabled"; +}; |