diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi | 96 |
1 files changed, 47 insertions, 49 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi index ce543e325cd3..7af74b203e39 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi @@ -97,57 +97,55 @@ }; &iomuxc { - microsom { - pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - /* AR8035 reset */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 - /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 - /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 - /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + pinctrl_microsom_enet_ar8035: microsom-enet-ar8035grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - /* - * As the RMII pins are also connected to RGMII - * so that an AR8030 can be placed, set these - * to high-z with the same pulls as above. - * Use the GPIO settings to avoid changing the - * input select registers. - */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 - >; - }; + /* + * As the RMII pins are also connected to RGMII + * so that an AR8030 can be placed, set these + * to high-z with the same pulls as above. + * Use the GPIO settings to avoid changing the + * input select registers. + */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 + >; + }; - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; + pinctrl_microsom_uart1: microsom-uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; }; }; |