diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 677 |
1 files changed, 677 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi new file mode 100644 index 000000000000..1235a71c6abe --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi @@ -0,0 +1,677 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ-Systems MBa7 carrier board. + * + * Copyright (C) 2016 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + * + * Note: This file does not include nodes for all peripheral devices. + * As device driver coverage increases additional nodes can be added. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc1; + /delete-property/ mmc2; + rtc0 = &ds1339; + rtc1 = &snvs_rtc; + }; + + beeper { + compatible = "gpio-beeper"; + gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = &uart6; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + + /* + * NOTE: These buttons are attached to a GPIO-expander. + * Enabling wakeup-source, enables wakeup on all inputs. + * If PE_GPIO[3..6] are used as inputs, they cause a + * wakeup as well. + */ + button-0 { + /* #SWITCH_A */ + label = "S11"; + linux,code = <KEY_1>; + gpios = <&pca9555 13 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-1 { + /* #SWITCH_B */ + label = "S12"; + linux,code = <KEY_2>; + gpios = <&pca9555 14 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-2 { + /* #SWITCH_C */ + label = "S13"; + linux,code = <KEY_3>; + gpios = <&pca9555 15 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_fec1_pwdn: regulator-fec1-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_fec2_pwdn: regulator-fec2-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mba_12v0: regulator-mba-12v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC12V0_MBA7"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_transmitter: regulator-lvds-transmitter { + compatible = "regulator-fixed"; + regulator-name = "#SHTDN_LVDS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>; + cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, + <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii-id"; + phy-supply = <®_fec1_pwdn>; + phy-handle = <ðphy1_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <500>; + }; + }; +}; + +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "U-Boot"; + reg = <0x0 0xd0000>; + }; + + env1@d0000 { + label = "ENV1"; + reg = <0xd0000 0x10000>; + }; + + env2@e0000 { + label = "ENV2"; + reg = <0xe0000 0x10000>; + }; + + dtb@f0000 { + label = "DTB"; + reg = <0xf0000 0x10000>; + }; + + linux@100000 { + label = "Linux"; + reg = <0x100000 0x700000>; + }; + + rootfs@800000 { + label = "RootFS"; + reg = <0x800000 0x3800000>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + vs-supply = <®_vcc_3v3>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_recovery>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + clock-names = "mclk"; + ldoin-supply = <®_audio_3v3>; + iov-supply = <®_audio_3v3>; + }; + + pca9555: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9555>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_vcc_3v3>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = + <MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c>, + <MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74>, + <MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74>, + <MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74>, + <MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74>, + <MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74>; + }; + + pinctrl_ecspi1_ss0: ecspi1ss0grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x74 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = + <MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c>, + <MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74>, + <MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74>, + <MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74>; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = + <MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02>, + <MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00>, + <MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71>, + <MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71>, + <MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71>, + <MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71>, + <MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71>, + <MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71>, + <MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79>, + <MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79>, + <MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79>, + <MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79>, + <MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79>, + <MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79>; + }; + + pinctrl_enet1_phy: enet1phygrp { + fsl,pins = + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + <MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070>, + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + <MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078>; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = + <MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a>, + <MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52>; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = + <MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a>, + <MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52>; + }; + + pinctrl_hog_mba7_1: hogmba71grp { + fsl,pins = + /* Limitation: WDOG2_B / WDOG2_RESET not usable */ + <MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c>, + <MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074>, + /* #BOOT_EN */ + <MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010>; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078>, + <MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078>; + }; + + pinctrl_i2c2_recovery: i2c2recoverygrp { + fsl,pins = + <MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x40000078>, + <MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x40000078>; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = + <MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078>, + <MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078>; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = + <MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x40000078>, + <MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x40000078>; + }; + + pinctrl_pca9555: pca95550grp { + fsl,pins = + <MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78>; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = + <MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11>, + <MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c>, + <MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c>, + <MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c>, + + <MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c>, + <MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14>, + <MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14>; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + <MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e>, + <MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76>, + <MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76>, + <MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e>; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = + <MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e>, + <MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76>, + <MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76>, + <MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e>; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = + <MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e>, + <MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76>; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = + <MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d>, + <MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75>, + <MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75>, + <MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d>; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = + <MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e>, + <MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76>, + <MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76>, + /* Limitation: RTS is not connected */ + <MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e>; + }; + + pinctrl_usdhc1_gpio: usdhc1_gpiogrp { + fsl,pins = + /* WP */ + <MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c>, + /* CD */ + <MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c>, + /* VSELECT */ + <MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5e>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e>; + }; + + pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp { + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5a>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a>; + }; + + pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp { + fsl,pins = + <MX7D_PAD_SD1_CMD__SD1_CMD 0x5b>, + <MX7D_PAD_SD1_CLK__SD1_CLK 0x57>, + <MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b>, + <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b>, + <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b>, + <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b>; + }; +}; + +&iomuxc_lpsr { + pinctrl_pwm1: pwm1grp { + fsl,pins = + /* LCD_CONTRAST */ + <MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50>; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c>, + <MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59>; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = + <MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +&usbh { + disable-over-current; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_usb_otg1_vbus>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; + bus-width = <4>; + no-1-8-v; + no-sdio; + no-emmc; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; |