diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/mxs/imx23.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 635 |
1 files changed, 635 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi new file mode 100644 index 000000000000..0309592af1e1 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -0,0 +1,635 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. + +#include "imx23-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&icoll>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + serial0 = &auart0; + serial1 = &auart1; + spi0 = &ssp0; + spi1 = &ssp1; + usbphy0 = &usbphy0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x40000>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx23-icoll", "fsl,icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + dma_apbh: dma-controller@80004000 { + compatible = "fsl,imx23-dma-apbh"; + reg = <0x80004000 0x2000>; + interrupts = <0>, <14>, <20>, <0>, + <13>, <13>, <13>, <13>; + #dma-cells = <1>; + dma-channels = <8>; + clocks = <&clks 15>; + }; + + ecc@80008000 { + reg = <0x80008000 0x2000>; + status = "disabled"; + }; + + nand-controller@8000c000 { + compatible = "fsl,imx23-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <56>; + interrupt-names = "bch"; + clocks = <&clks 34>; + clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + ssp0: spi@80010000 { + reg = <0x80010000 0x2000>; + interrupts = <15>; + clocks = <&clks 33>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + etm@80014000 { + reg = <0x80014000 0x2000>; + status = "disabled"; + }; + + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-pinctrl", "simple-bus"; + reg = <0x80018000 0x2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx23-gpio"; + reg = <0>; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx23-gpio"; + reg = <1>; + interrupts = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx23-gpio"; + reg = <2>; + interrupts = <18>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + duart_pins_a: duart@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_PWM0__DUART_RX + MX23_PAD_PWM1__DUART_TX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_AUART1_RX__AUART1_RX + MX23_PAD_AUART1_TX__AUART1_TX + MX23_PAD_AUART1_CTS__AUART1_CTS + MX23_PAD_AUART1_RTS__AUART1_RTS + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_I2C_SCL__AUART1_TX + MX23_PAD_I2C_SDA__AUART1_RX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D14__AUART2_RX + MX23_PAD_GPMI_D15__AUART2_TX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__GPMI_D00 + MX23_PAD_GPMI_D01__GPMI_D01 + MX23_PAD_GPMI_D02__GPMI_D02 + MX23_PAD_GPMI_D03__GPMI_D03 + MX23_PAD_GPMI_D04__GPMI_D04 + MX23_PAD_GPMI_D05__GPMI_D05 + MX23_PAD_GPMI_D06__GPMI_D06 + MX23_PAD_GPMI_D07__GPMI_D07 + MX23_PAD_GPMI_CLE__GPMI_CLE + MX23_PAD_GPMI_ALE__GPMI_ALE + MX23_PAD_GPMI_RDY0__GPMI_RDY0 + MX23_PAD_GPMI_RDY1__GPMI_RDY1 + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN + MX23_PAD_GPMI_CE1N__GPMI_CE1N + MX23_PAD_GPMI_CE0N__GPMI_CE0N + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + gpmi_pins_fixup: gpmi-pins-fixup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_WPN__GPMI_WPN + MX23_PAD_GPMI_WRN__GPMI_WRN + MX23_PAD_GPMI_RDN__GPMI_RDN + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DATA0__SSP1_DATA0 + MX23_PAD_SSP1_DATA1__SSP1_DATA1 + MX23_PAD_SSP1_DATA2__SSP1_DATA2 + MX23_PAD_SSP1_DATA3__SSP1_DATA3 + MX23_PAD_GPMI_D08__SSP1_DATA4 + MX23_PAD_GPMI_D09__SSP1_DATA5 + MX23_PAD_GPMI_D10__SSP1_DATA6 + MX23_PAD_GPMI_D11__SSP1_DATA7 + MX23_PAD_SSP1_CMD__SSP1_CMD + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc0_pins_fixup: mmc0-pins-fixup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DETECT__SSP1_DETECT + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc0_sck_cfg: mmc0-sck-cfg@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_8bit_pins_a: mmc1-8bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_D04__SSP2_DATA4 + MX23_PAD_GPMI_D05__SSP2_DATA5 + MX23_PAD_GPMI_D06__SSP2_DATA6 + MX23_PAD_GPMI_D07__SSP2_DATA7 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_PWM2__PWM2 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_LCD_D00__LCD_D00 + MX23_PAD_LCD_D01__LCD_D01 + MX23_PAD_LCD_D02__LCD_D02 + MX23_PAD_LCD_D03__LCD_D03 + MX23_PAD_LCD_D04__LCD_D04 + MX23_PAD_LCD_D05__LCD_D05 + MX23_PAD_LCD_D06__LCD_D06 + MX23_PAD_LCD_D07__LCD_D07 + MX23_PAD_LCD_D08__LCD_D08 + MX23_PAD_LCD_D09__LCD_D09 + MX23_PAD_LCD_D10__LCD_D10 + MX23_PAD_LCD_D11__LCD_D11 + MX23_PAD_LCD_D12__LCD_D12 + MX23_PAD_LCD_D13__LCD_D13 + MX23_PAD_LCD_D14__LCD_D14 + MX23_PAD_LCD_D15__LCD_D15 + MX23_PAD_LCD_D16__LCD_D16 + MX23_PAD_LCD_D17__LCD_D17 + MX23_PAD_GPMI_D08__LCD_D18 + MX23_PAD_GPMI_D09__LCD_D19 + MX23_PAD_GPMI_D10__LCD_D20 + MX23_PAD_GPMI_D11__LCD_D21 + MX23_PAD_GPMI_D12__LCD_D22 + MX23_PAD_GPMI_D13__LCD_D23 + MX23_PAD_LCD_DOTCK__LCD_DOTCK + MX23_PAD_LCD_ENABLE__LCD_ENABLE + MX23_PAD_LCD_HSYNC__LCD_HSYNC + MX23_PAD_LCD_VSYNC__LCD_VSYNC + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_WRN__SSP2_SCK + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D03__SSP2_DATA3 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_a: i2c@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_b: i2c@1 { + reg = <1>; + fsl,pinmux-ids = < + MX23_PAD_LCD_ENABLE__I2C_SCL + MX23_PAD_LCD_HSYNC__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_c: i2c@2 { + reg = <2>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DATA1__I2C_SCL + MX23_PAD_SSP1_DATA2__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + }; + + digctl@8001c000 { + compatible = "fsl,imx23-digctl"; + reg = <0x8001c000 2000>; + status = "disabled"; + }; + + emi@80020000 { + reg = <0x80020000 0x2000>; + status = "disabled"; + }; + + dma_apbx: dma-controller@80024000 { + compatible = "fsl,imx23-dma-apbx"; + reg = <0x80024000 0x2000>; + interrupts = <7>, <5>, <9>, <26>, + <19>, <0>, <25>, <23>, + <60>, <58>, <9>, <0>, + <0>, <0>, <0>, <0>; + interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", + "saif0", "empty", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty", + "empty", "empty", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; + clocks = <&clks 16>; + }; + + dcp: crypto@80028000 { + compatible = "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <53>, <54>; + status = "okay"; + }; + + pxp@8002a000 { + reg = <0x8002a000 0x2000>; + status = "disabled"; + }; + + efuse@8002c000 { + compatible = "fsl,imx23-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8002c000 0x2000>; + clocks = <&clks 15>; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 0x2000>; + status = "disabled"; + }; + + lcdif@80030000 { + compatible = "fsl,imx23-lcdif"; + reg = <0x80030000 2000>; + interrupts = <46>, <45>; + clocks = <&clks 38>; + status = "disabled"; + }; + + ssp1: spi@80034000 { + reg = <0x80034000 0x2000>; + interrupts = <2>; + clocks = <&clks 33>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + tvenc@80038000 { + reg = <0x80038000 0x2000>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + }; + + saif0: saif@80042000 { + reg = <0x80042000 0x2000>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 0x2000>; + status = "disabled"; + }; + + saif1: saif@80046000 { + reg = <0x80046000 0x2000>; + dmas = <&dma_apbx 10>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + audio-out@80048000 { + reg = <0x80048000 0x2000>; + dmas = <&dma_apbx 1>; + dma-names = "tx"; + status = "disabled"; + }; + + audio-in@8004c000 { + reg = <0x8004c000 0x2000>; + dmas = <&dma_apbx 0>; + dma-names = "rx"; + status = "disabled"; + }; + + lradc: lradc@80050000 { + compatible = "fsl,imx23-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <36>, <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>; + status = "disabled"; + clocks = <&clks 26>; + #io-channel-cells = <1>; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; + status = "disabled"; + }; + + i2c: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-i2c"; + reg = <0x80058000 0x2000>; + interrupts = <27>; + clock-frequency = <100000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + rtc@8005c000 { + compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; + reg = <0x8005c000 0x2000>; + interrupts = <22>; + }; + + pwm: pwm@80064000 { + compatible = "fsl,imx23-pwm"; + reg = <0x80064000 0x2000>; + clocks = <&clks 30>; + #pwm-cells = <3>; + fsl,pwm-number = <5>; + status = "disabled"; + }; + + timrot@80068000 { + compatible = "fsl,imx23-timrot", "fsl,timrot"; + reg = <0x80068000 0x2000>; + interrupts = <28>, <29>, <30>, <31>; + clocks = <&clks 28>; + }; + + auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24>; + clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + auart1: serial@8006e000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006e000 0x2000>; + interrupts = <59>; + clocks = <&clks 32>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + duart: serial@80070000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80070000 0x2000>; + interrupts = <0>; + clocks = <&clks 32>, <&clks 16>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + usbphy0: usbphy@8007c000 { + compatible = "fsl,imx23-usbphy"; + reg = <0x8007c000 0x2000>; + clocks = <&clks 41>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usb0: usb@80080000 { + compatible = "fsl,imx23-usb", "fsl,imx27-usb"; + reg = <0x80080000 0x40000>; + interrupts = <11>; + fsl,usbphy = <&usbphy0>; + clocks = <&clks 40>; + status = "disabled"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&lradc 8>; + }; +}; |