diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts')
| -rw-r--r-- | arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts new file mode 100644 index 000000000000..d004b1cbb4ae --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 Free Electrons + */ + +/dts-v1/; +#include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Crystalfontz CFA-10036 Board"; + compatible = "crystalfontz,cfa10036", "fsl,imx28"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cfa10036>; + + power { + gpios = <&gpio3 4 1>; + default-state = "on"; + }; + }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pwr_cfa10036>; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; + reg = <0x3c>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + }; +}; + +&pinctrl { + ssd1306_cfa10036: ssd1306-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__USB0_ID + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + dr_mode = "peripheral"; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; |