diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-beagle-xm.dts')
| -rw-r--r-- | arch/arm/boot/dts/omap3-beagle-xm.dts | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1a085bc01317..08ee0f8ea68f 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -90,7 +90,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ vcc-supply = <&hsusb2_power>; @@ -183,13 +183,13 @@ }; &omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { + gpio1_pins: gpio1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; - dss_dpi_pins2: pinmux_dss_dpi_pins1 { + dss_dpi_pins2: dss-dpi1-pins { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ @@ -207,14 +207,14 @@ &hsusb2_pins >; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; }; - hsusb2_pins: pinmux_hsusb2_pins { + hsusb2_pins: hsusb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ @@ -225,7 +225,7 @@ >; }; - dss_dpi_pins1: pinmux_dss_dpi_pins2 { + dss_dpi_pins1: dss-dpi2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ @@ -261,7 +261,7 @@ &hsusb2_2_pins >; - hsusb2_2_pins: pinmux_hsusb2_2_pins { + hsusb2_2_pins: hsusb2-2-pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ |