summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-n950-n9.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap3-n950-n9.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3-n950-n9.dtsi151
1 files changed, 151 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 858a25048102..a00ca761675d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -14,6 +14,13 @@
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
+ operating-points = <
+ /* kHz uV */
+ 300000 1012500
+ 600000 1200000
+ 800000 1325000
+ 1000000 1375000
+ >;
};
};
@@ -39,9 +46,34 @@
enable-active-high;
regulator-boot-off;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "debug::sleep";
+ gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */
+ linux,default-trigger = "default-on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&debug_leds>;
+ };
+ };
};
&omap3_pmx_core {
+ accelerator_pins: pinmux_accelerator_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+ >;
+ };
+
+ debug_leds: pinmux_debug_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
+ >;
+ };
+
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
@@ -129,6 +161,30 @@
ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
};
+&vdac {
+ regulator-name = "vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vpll1 {
+ regulator-name = "vpll1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vpll2 {
+ regulator-name = "vpll2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vaux1 {
+ regulator-name = "vaux1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
/* CSI-2 receiver */
&vaux2 {
regulator-name = "vaux2";
@@ -143,12 +199,107 @@
regulator-max-microvolt = <2800000>;
};
+&vaux4 {
+ regulator-name = "vaux4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+ regulator-name = "vmmc1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+ regulator-name = "vmmc2";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vintana1 {
+ regulator-name = "vintana1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+};
+
+&vintana2 {
+ regulator-name = "vintana2";
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+};
+
+&vintdig {
+ regulator-name = "vintdig";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+};
+
+&vsim {
+ regulator-name = "vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+ regulator-name = "vio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
+
+ lis302: lis302@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+
+ Vdd-supply = <&vaux1>;
+ Vdd_IO-supply = <&vio>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accelerator_pins>;
+
+ interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+ /* click flags */
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+
+ /* Limits are 0.5g * value */
+ st,click-threshold-x = <8>;
+ st,click-threshold-y = <8>;
+ st,click-threshold-z = <10>;
+
+ /* Click must be longer than time limit */
+ st,click-time-limit = <9>;
+
+ /* Kind of debounce filter */
+ st,click-latency = <50>;
+
+ st,wakeup-x-hi;
+ st,wakeup-y-hi;
+ st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+ st,wakeup2-z-hi;
+ st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+ st,highpass-cutoff-hz = <2>;
+
+ /* Interrupt line 1 for thresholds */
+ st,irq1-ff-wu-1;
+ st,irq1-ff-wu-2;
+ /* Interrupt line 2 for click detection */
+ st,irq2-click;
+
+ st,wu-duration-1 = <8>;
+ st,wu-duration-2 = <8>;
+ };
};
&mmc1 {