diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-tao3530.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3-tao3530.dtsi | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 7f440d11f7e7..92a5846048bd 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -43,7 +43,7 @@ }; /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { + hsusb2_phy: hsusb2-phy-pins { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ vcc-supply = <&hsusb2_power>; @@ -70,7 +70,7 @@ }; &omap3_pmx_core { - hsusbb2_pins: pinmux_hsusbb2_pins { + hsusbb2_pins: hsusbb2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ @@ -87,7 +87,7 @@ >; }; - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ @@ -102,7 +102,7 @@ >; }; - mmc2_pins: pinmux_mmc2_pins { + mmc2_pins: mmc2-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ @@ -114,27 +114,27 @@ }; /* wlan GPIO output for WLAN_EN */ - wlan_gpio: pinmux_wlan_gpio { + wlan_gpio: wlan-gpio-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ >; }; - uart3_pins: pinmux_uart3_pins { + uart3_pins: uart3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; - i2c3_pins: pinmux_i2c3_pins { + i2c3_pins: i2c3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; - mcspi1_pins: pinmux_mcspi1_pins { + mcspi1_pins: mcspi1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ @@ -143,7 +143,7 @@ >; }; - mcspi3_pins: pinmux_mcspi3_pins { + mcspi3_pins: mcspi3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ @@ -152,7 +152,7 @@ >; }; - mcbsp3_pins: pinmux_mcbsp3_pins { + mcbsp3_pins: mcbsp3-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ |