summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap5.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap5.dtsi')
-rw-r--r--arch/arm/boot/dts/omap5.dtsi204
1 files changed, 127 insertions, 77 deletions
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index ee821d0ab364..bac6fa838793 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -106,6 +106,15 @@
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
};
+ /*
+ * Needed early by omap4_sram_init() for barrier, do not move to l3
+ * interconnect as simple-pm-bus probes at module_init() time.
+ */
+ ocmcram: sram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0 0x40300000 0 0x20000>; /* 128k */
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
@@ -126,19 +135,6 @@
};
/*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap4-mpu";
- ti,hwmods = "mpu";
- sram = <&ocmcram>;
- };
- };
-
- /*
* XXX: Use a flat representation of the OMAP3 interconnect.
* The real OMAP interconnect network is quite complex.
* Since it will not bring real advantage to represent that in DT for
@@ -146,17 +142,24 @@
* hierarchy.
*/
ocp {
- compatible = "ti,omap5-l3-noc", "simple-bus";
+ compatible = "simple-pm-bus";
+ power-domains = <&prm_core>;
+ clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
+ <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
+ <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xc0000000>;
dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
- ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- reg = <0 0x44000000 0 0x2000>,
- <0 0x44800000 0 0x3000>,
- <0 0x45000000 0 0x4000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l3-noc@44000000 {
+ compatible = "ti,omap5-l3-noc";
+ reg = <0x44000000 0x2000>,
+ <0x44800000 0x3000>,
+ <0x45000000 0x4000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
l4_wkup: interconnect@4ae00000 {
};
@@ -167,31 +170,58 @@
l4_per: interconnect@48000000 {
};
- l4_abe: interconnect@40100000 {
+ target-module@48210000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48210000 0x1f0000>;
+
+ mpu {
+ compatible = "ti,omap4-mpu";
+ sram = <&ocmcram>;
+ };
};
- ocmcram: sram@40300000 {
- compatible = "mmio-sram";
- reg = <0x40300000 0x20000>; /* 128k */
+ l4_abe: interconnect@40100000 {
};
- gpmc: gpmc@50000000 {
- compatible = "ti,omap4430-gpmc";
- reg = <0x50000000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 4>;
- dma-names = "rxtx";
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <4>;
- ti,hwmods = "gpmc";
- clocks = <&l3_iclk_div>;
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ ti,no-idle-on-init;
+ clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
clock-names = "fck";
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ clock-names = "fck";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
target-module@55082000 {
@@ -246,35 +276,67 @@
status = "disabled";
};
- dmm@4e000000 {
- compatible = "ti,omap5-dmm";
- reg = <0x4e000000 0x800>;
- interrupts = <0 113 0x4>;
- ti,hwmods = "dmm";
+ target-module@4e000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4e000000 0x4>,
+ <0x4e000010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ranges = <0x0 0x4e000000 0x2000000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ dmm@0 {
+ compatible = "ti,omap5-dmm";
+ reg = <0 0x800>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- emif1: emif@4c000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif1";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4c000000 0x400>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4c000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4c000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4c000000 0x1000000>;
+
+ emif1: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
- emif2: emif@4d000000 {
- compatible = "ti,emif-4d5";
- ti,hwmods = "emif2";
- ti,no-idle-on-init;
- phy-type = <2>; /* DDR PHY type: Intelli PHY */
- reg = <0x4d000000 0x400>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- hw-caps-read-idle-ctrl;
- hw-caps-ll-interface;
- hw-caps-temp-alert;
+ target-module@4d000000 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ reg = <0x4d000000 0x4>;
+ reg-names = "rev";
+ clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4d000000 0x1000000>;
+
+ emif2: emif@0 {
+ compatible = "ti,emif-4d5";
+ reg = <0 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
aes1_target: target-module@4b501000 {
@@ -374,18 +436,6 @@
#thermal-sensor-cells = <1>;
};
- /* OCP2SCP3 */
- sata: sata@4a141100 {
- compatible = "snps,dwc-ahci";
- reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
- ti,hwmods = "sata";
- ports-implemented = <0x1>;
- };
-
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,