summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8064-ifc6410.dts')
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-ifc6410.dts561
1 files changed, 269 insertions, 292 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7f90217661b..96307550523a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -22,23 +22,12 @@
stdout-path = "serial0:115200n8";
};
- pwrseq {
- compatible = "simple-bus";
-
- sdcc4_pwrseq: sdcc4_pwrseq {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_default_gpios>;
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&notify_led>;
- led@1 {
+ led-user1 {
label = "apq8064:green:user1";
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
@@ -57,326 +46,314 @@
};
};
- soc {
- pinctrl@800000 {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
- };
+ sdcc4_pwrseq: pwrseq-sdcc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_gpios>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+ };
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
- };
- };
+ ext_3p3v: regulator-ext-3p3v {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
- rpm@108000 {
- regulators {
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vdd_l24-supply = <&pm8921_s1>;
- vdd_l25-supply = <&pm8921_s1>;
- vdd_l26-supply = <&pm8921_s7>;
- vdd_l27-supply = <&pm8921_s7>;
- vdd_l28-supply = <&pm8921_s7>;
-
-
- /* Buck SMPS */
- s1 {
- regulator-always-on;
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- };
-
- s3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- qcom,switch-mode-frequency = <4800000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- s7 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- l3 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- l4 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- l5 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <3000000>;
- bias-pull-down;
- };
-
- l6 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- l23 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- lvs1 {
- bias-pull-down;
- };
-
- lvs6 {
- bias-pull-down;
- };
- };
- };
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_I2C>;
+ status = "okay";
+};
- ext_3p3v: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "ext_3p3v";
- regulator-type = "voltage";
- startup-delay-us = <0>;
- gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- };
+&gsbi1_i2c {
+ clock-frequency = <200000>;
+ status = "okay";
- gsbi3: gsbi@16200000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16280000 {
- status = "okay";
- };
- };
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+};
- gsbi@16300000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- /* CAM I2C MIPI-CSI connector */
- i2c@16380000 {
- status = "okay";
- };
- };
+&gsbi3 {
+ qcom,mode = <GSBI_PROT_I2C>;
+ status = "okay";
+};
+
+&gsbi3_i2c {
+ status = "okay";
+};
- gsbi@12440000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C>;
+ status = "okay";
+};
- i2c@12460000 {
- status = "okay";
- clock-frequency = <200000>;
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+ status = "okay";
+};
- eeprom@52 {
- compatible = "atmel,24c128";
- reg = <0x52>;
- pagesize = <32>;
- };
- };
- };
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+};
- gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
- spi4: spi@1a280000 {
- status = "okay";
- num-cs = <1>;
- cs-gpios = <&tlmm_pinmux 53 0>;
- };
- };
+&gsbi5_spi {
+ num-cs = <1>;
+ cs-gpios = <&tlmm_pinmux 53 0>;
+ status = "okay";
+};
+
+&gsbi6 {
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ status = "okay";
+};
- gsbi@16500000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_UART_W_FC>;
+&gsbi6_serial {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi6_uart_4pins>;
+ status = "okay";
+};
- serial@16540000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi6_uart_4pins>;
- };
+&gsbi7 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi7_serial {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
+ status = "okay";
+};
+
+&hdmi {
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+ hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&hdmi_in {
+ remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+ remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+ status = "okay";
+ core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdp_dtv_out {
+ remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+ status = "okay";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&ext_3p3v>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+ perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8921_gpio {
+ wlan_default_gpios: wlan-gpios-state {
+ pinconf {
+ pins = "gpio43";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
};
+ };
- gsbi@16600000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
- serial@16640000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi7_uart_2pins>;
- };
+ notify_led: nled-state {
+ pinconf {
+ pins = "gpio18";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
};
+ };
+};
- sata_phy0: phy@1b400000 {
- status = "okay";
+&rpm {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
};
- sata0: sata@29000000 {
- status = "okay";
- target-supply = <&pm8921_s4>;
+ s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
};
- /* OTG */
- usb@12500000 {
- status = "okay";
- dr_mode = "otg";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
- };
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
};
- usb@12520000 {
- status = "okay";
- dr_mode = "host";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
};
- usb@12530000 {
- status = "okay";
- dr_mode = "host";
- ulpi {
- phy {
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
- };
+ l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
};
- pci@1b500000 {
- status = "okay";
- vdda-supply = <&pm8921_s3>;
- vdda_phy-supply = <&pm8921_lvs6>;
- vdda_refclk-supply = <&ext_3p3v>;
- pinctrl-0 = <&pcie_pins>;
- pinctrl-names = "default";
- perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+ l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
};
- qcom,ssbi@500000 {
- pmic@0 {
- gpio@150 {
- wlan_default_gpios: wlan-gpios-state {
- pinconf {
- pins = "gpio43";
- function = "normal";
- bias-disable;
- power-source = <PM8921_GPIO_S4>;
- };
- };
-
- notify_led: nled-state {
- pinconf {
- pins = "gpio18";
- function = "normal";
- bias-disable;
- power-source = <PM8921_GPIO_S4>;
- };
- };
- };
- };
+ l5 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
};
- amba {
- /* eMMC */
- sdcc1: mmc@12400000 {
- status = "okay";
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- };
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
- /* External micro SD card */
- sdcc3: mmc@12180000 {
- status = "okay";
- vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
- };
- /* WLAN */
- sdcc4: mmc@121c0000 {
- status = "okay";
- vmmc-supply = <&ext_3p3v>;
- vqmmc-supply = <&pm8921_lvs1>;
- mmc-pwrseq = <&sdcc4_pwrseq>;
- };
+ l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
};
- hdmi-tx@4a00000 {
- status = "okay";
+ lvs1 {
+ bias-pull-down;
+ };
- core-vdda-supply = <&pm8921_hdmi_switch>;
+ lvs6 {
+ bias-pull-down;
+ };
+ };
+};
- hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+&sata_phy0 {
+ status = "okay";
+};
- ports {
- port@0 {
- endpoint {
- remote-endpoint = <&mdp_dtv_out>;
- };
- };
+&sata0 {
+ target-supply = <&pm8921_s4>;
+ status = "okay";
+};
- port@1 {
- endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
+/* eMMC */
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ status = "okay";
+};
- hdmi-phy@4a00400 {
- status = "okay";
+/* External micro SD card */
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
- core-vdda-supply = <&pm8921_hdmi_switch>;
- };
+/* WLAN */
+&sdcc4 {
+ vmmc-supply = <&ext_3p3v>;
+ vqmmc-supply = <&pm8921_lvs1>;
+ mmc-pwrseq = <&sdcc4_pwrseq>;
+ status = "okay";
+};
- mdp@5100000 {
- status = "okay";
+&tlmm_pinmux {
+ card_detect: card_detect {
+ mux {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
+ };
+ };
- ports {
- port@3 {
- endpoint {
- remote-endpoint = <&hdmi_in>;
- };
- };
- };
+ pcie_pins: pcie_pinmux {
+ mux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+ conf {
+ pins = "gpio27";
+ drive-strength = <12>;
+ bias-disable;
};
};
};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb4 {
+ dr_mode = "host";
+ status = "okay";
+};
generated by cgit (git 2.34.1) at 2024-06-07 19:51:21 +0000