diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts new file mode 100644 index 000000000000..ed86b24119c9 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Qualcomm APQ8064/IFC6410"; + compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; + i2c0 = &gsbi1_i2c; + i2c1 = &gsbi2_i2c; + i2c2 = &gsbi3_i2c; + i2c3 = &gsbi4_i2c; + spi0 = &gsbi5_spi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led-user1 { + label = "apq8064:green:user1"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + + ext_3p3v: regulator-ext-3p3v { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + clock-frequency = <200000>; + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + status = "okay"; +}; + +&gsbi4 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +/* CAM I2C MIPI-CSI connector */ +&gsbi4_i2c { + status = "okay"; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; +}; + +&gsbi5_spi { + num-cs = <1>; + cs-gpios = <&tlmm_pinmux 53 0>; + status = "okay"; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_UART_W_FC>; + status = "okay"; +}; + +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; + +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + status = "okay"; +}; + +&hdmi { + core-vdda-supply = <&pm8921_hdmi_switch>; + hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi_in { + remote-endpoint = <&mdp_dtv_out>; +}; + +&hdmi_out { + remote-endpoint = <&hdmi_con>; +}; + +&hdmi_phy { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; +}; + +&mdp { + status = "okay"; +}; + +&mdp_dtv_out { + remote-endpoint = <&hdmi_in>; +}; + +&pcie { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; +}; + +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_gpio { + wlan_default_gpios: wlan-gpios-state { + pinconf { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled-state { + pinconf { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata0 { + target-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +/* External micro SD card */ +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* WLAN */ +&sdcc4 { + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; + status = "okay"; +}; + +&tlmm_pinmux { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb_hs3_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +&usb_hs4_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3 { + dr_mode = "host"; + status = "okay"; +}; + +&usb4 { + dr_mode = "host"; + status = "okay"; +}; |