diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 97 |
1 files changed, 53 insertions, 44 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index f989bd741cd1..f77542fb3d4f 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -47,13 +47,12 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - clock-latency = <256000>; operating-points-v2 = <&cpu0_opp_table>; }; @@ -61,13 +60,12 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - clock-latency = <256000>; operating-points-v2 = <&cpu0_opp_table>; }; @@ -75,13 +73,12 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - clock-latency = <256000>; operating-points-v2 = <&cpu0_opp_table>; }; @@ -89,17 +86,16 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; enable-method = "qcom,kpss-acc-v2"; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - clock-latency = <256000>; operating-points-v2 = <&cpu0_opp_table>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -126,7 +122,7 @@ opp-716000000 { opp-hz = /bits/ 64 <716000000>; clock-latency-ns = <256000>; - }; + }; }; memory { @@ -162,10 +158,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <48000000>; always-on; }; @@ -187,7 +183,6 @@ gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq4019"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; clocks = <&xo>, <&sleep_clk>; @@ -350,34 +345,29 @@ reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; }; - saw0: regulator@b089000 { - compatible = "qcom,saw2"; + saw0: power-manager@b089000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; - regulator; }; - saw1: regulator@b099000 { - compatible = "qcom,saw2"; + saw1: power-manager@b099000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; - regulator; }; - saw2: regulator@b0a9000 { - compatible = "qcom,saw2"; + saw2: power-manager@b0a9000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; - regulator; }; - saw3: regulator@b0b9000 { - compatible = "qcom,saw2"; + saw3: power-manager@b0b9000 { + compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2"; reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; - regulator; }; - saw_l2: regulator@b012000 { - compatible = "qcom,saw2"; + saw_l2: power-manager@b012000 { + compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2"; reg = <0xb012000 0x1000>; - regulator; }; blsp1_uart1: serial@78af000 { @@ -475,6 +465,16 @@ "phy_ahb"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; qpic_bam: dma-controller@7984000 { @@ -603,24 +603,33 @@ reg = <0x90000 0x64>; status = "disabled"; - ethphy0: ethernet-phy@0 { + ethernet-phy-package@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,qca8075-package"; reg = <0>; - }; - ethphy1: ethernet-phy@1 { - reg = <1>; - }; + qcom,tx-drive-strength-milliwatt = <300>; - ethphy2: ethernet-phy@2 { - reg = <2>; - }; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; - ethphy3: ethernet-phy@3 { - reg = <3>; - }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; - ethphy4: ethernet-phy@4 { - reg = <4>; + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; }; @@ -684,7 +693,7 @@ clocks = <&gcc GCC_USB2_MASTER_CLK>, <&gcc GCC_USB2_SLEEP_CLK>, <&gcc GCC_USB2_MOCK_UTMI_CLK>; - clock-names = "master", "sleep", "mock_utmi"; + clock-names = "core", "sleep", "mock_utmi"; ranges; status = "disabled"; |