diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8960.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 160 |
1 files changed, 145 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index f420740e068e..4babd0bbe5d6 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -25,7 +25,7 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; }; @@ -35,21 +35,63 @@ enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; }; }; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x0 0x0>; + reg = <0x80000000 0>; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 0>; + + trips { + cpu_alert0: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 1>; + + trips { + cpu_alert1: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; }; cpu-pmu { @@ -112,9 +154,26 @@ <GIC_PPI 3 0x301>; reg = <0x0200a000 0x100>; clock-frequency = <27000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; cpu-offset = <0x80000>; }; + qfprom: efuse@700000 { + compatible = "qcom,msm8960-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_calib: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_backup: backup-calib@414 { + reg = <0x414 0x10>; + }; + }; + msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; @@ -127,15 +186,26 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; + compatible = "qcom,gcc-msm8960", "syscon"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, <&pxo_board>, <&lcc PLL4>; clock-names = "cxo", "pxo", "pll4"; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller@28000000 { @@ -220,16 +290,24 @@ #clock-cells = <0>; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; + saw0: power-manager@2089000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; + + saw0_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; + saw1: power-manager@2099000 { + compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; + + saw1_vreg: regulator { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; }; gsbi5: gsbi@16400000 { @@ -272,7 +350,7 @@ compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; - reg = <0x12180000 0x8000>; + reg = <0x12180000 0x2000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -282,13 +360,25 @@ max-frequency = <192000000>; no-1-8-v; vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3bam: dma-controller@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x4000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; }; sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; + reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -298,6 +388,18 @@ cap-sd-highspeed; cap-mmc-highspeed; vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc1bam: dma-controller@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; }; tcsr: syscon@1a400000 { @@ -359,5 +461,33 @@ }; }; }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + ranges; + cell-index = <3>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + gsbi3_i2c: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; }; +#include "qcom-msm8960-pins.dtsi" |