diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-msm8974.dtsi')
-rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 128 |
1 files changed, 65 insertions, 63 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 5efc38d712cc..e3f9c56a778c 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -14,6 +14,8 @@ #size-cells = <1>; interrupt-parent = <&intc>; + chosen { }; + clocks { xo_board: xo_board { compatible = "fixed-clock"; @@ -33,51 +35,51 @@ #size-cells = <0>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - CPU0: cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; - next-level-cache = <&L2>; + next-level-cache = <&l2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&cpu_spc>; }; - L2: l2-cache { + l2: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -85,7 +87,7 @@ }; idle-states { - CPU_SPC: spc { + cpu_spc: cpu-spc { compatible = "qcom,idle-state-spc", "arm,idle-state"; entry-latency-us = <150>; @@ -103,7 +105,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0>; }; @@ -130,11 +132,11 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8974"; + compatible = "qcom,rpm-msm8974", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -147,7 +149,7 @@ }; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; @@ -217,7 +219,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -242,7 +244,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -267,7 +269,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -292,9 +294,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -341,9 +341,11 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8974-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; }; saw_l2: power-manager@f9012000 { @@ -755,7 +757,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; wcnss { @@ -958,7 +960,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU0>; + cpu = <&cpu0>; out-ports { port { @@ -976,7 +978,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU1>; + cpu = <&cpu1>; out-ports { port { @@ -994,7 +996,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU2>; + cpu = <&cpu2>; out-ports { port { @@ -1012,7 +1014,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - cpu = <&CPU3>; + cpu = <&cpu3>; out-ports { port { @@ -1231,7 +1233,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x2100>; #address-cells = <1>; @@ -1297,7 +1299,7 @@ bits = <0 6>; }; - tsens_s10_p1: s10_p1@d8 { + tsens_s10_p1: s10-p1@d8 { reg = <0xd8 0x2>; bits = <6 6>; }; @@ -1357,137 +1359,137 @@ bits = <4 6>; }; - tsens_s10_p2: s10_p2@e2 { + tsens_s10_p2: s10-p2@e2 { reg = <0xe2 0x2>; bits = <2 6>; }; - tsens_s5_p2_backup: s5-p2_backup@e3 { + tsens_s5_p2_backup: s5-p2-backup@e3 { reg = <0xe3 0x2>; bits = <0 6>; }; - tsens_mode_backup: mode_backup@e3 { + tsens_mode_backup: mode-backup@e3 { reg = <0xe3 0x1>; bits = <6 2>; }; - tsens_s6_p2_backup: s6-p2_backup@e4 { + tsens_s6_p2_backup: s6-p2-backup@e4 { reg = <0xe4 0x1>; bits = <0 6>; }; - tsens_s7_p2_backup: s7-p2_backup@e4 { + tsens_s7_p2_backup: s7-p2-backup@e4 { reg = <0xe4 0x2>; bits = <6 6>; }; - tsens_s8_p2_backup: s8-p2_backup@e5 { + tsens_s8_p2_backup: s8-p2-backup@e5 { reg = <0xe5 0x2>; bits = <4 6>; }; - tsens_s9_p2_backup: s9-p2_backup@e6 { + tsens_s9_p2_backup: s9-p2-backup@e6 { reg = <0xe6 0x2>; bits = <2 6>; }; - tsens_s10_p2_backup: s10_p2_backup@e7 { + tsens_s10_p2_backup: s10-p2-backup@e7 { reg = <0xe7 0x1>; bits = <0 6>; }; - tsens_base1_backup: base1_backup@440 { + tsens_base1_backup: base1-backup@440 { reg = <0x440 0x1>; bits = <0 8>; }; - tsens_s0_p1_backup: s0-p1_backup@441 { + tsens_s0_p1_backup: s0-p1-backup@441 { reg = <0x441 0x1>; bits = <0 6>; }; - tsens_s1_p1_backup: s1-p1_backup@442 { + tsens_s1_p1_backup: s1-p1-backup@442 { reg = <0x441 0x2>; bits = <6 6>; }; - tsens_s2_p1_backup: s2-p1_backup@442 { + tsens_s2_p1_backup: s2-p1-backup@442 { reg = <0x442 0x2>; bits = <4 6>; }; - tsens_s3_p1_backup: s3-p1_backup@443 { + tsens_s3_p1_backup: s3-p1-backup@443 { reg = <0x443 0x1>; bits = <2 6>; }; - tsens_s4_p1_backup: s4-p1_backup@444 { + tsens_s4_p1_backup: s4-p1-backup@444 { reg = <0x444 0x1>; bits = <0 6>; }; - tsens_s5_p1_backup: s5-p1_backup@444 { + tsens_s5_p1_backup: s5-p1-backup@444 { reg = <0x444 0x2>; bits = <6 6>; }; - tsens_s6_p1_backup: s6-p1_backup@445 { + tsens_s6_p1_backup: s6-p1-backup@445 { reg = <0x445 0x2>; bits = <4 6>; }; - tsens_s7_p1_backup: s7-p1_backup@446 { + tsens_s7_p1_backup: s7-p1-backup@446 { reg = <0x446 0x1>; bits = <2 6>; }; - tsens_use_backup: use_backup@447 { + tsens_use_backup: use-backup@447 { reg = <0x447 0x1>; bits = <5 3>; }; - tsens_s8_p1_backup: s8-p1_backup@448 { + tsens_s8_p1_backup: s8-p1-backup@448 { reg = <0x448 0x1>; bits = <0 6>; }; - tsens_s9_p1_backup: s9-p1_backup@448 { + tsens_s9_p1_backup: s9-p1-backup@448 { reg = <0x448 0x2>; bits = <6 6>; }; - tsens_s10_p1_backup: s10_p1_backup@449 { + tsens_s10_p1_backup: s10-p1-backup@449 { reg = <0x449 0x2>; bits = <4 6>; }; - tsens_base2_backup: base2_backup@44a { + tsens_base2_backup: base2-backup@44a { reg = <0x44a 0x2>; bits = <2 8>; }; - tsens_s0_p2_backup: s0-p2_backup@44b { + tsens_s0_p2_backup: s0-p2-backup@44b { reg = <0x44b 0x3>; bits = <2 6>; }; - tsens_s1_p2_backup: s1-p2_backup@44c { + tsens_s1_p2_backup: s1-p2-backup@44c { reg = <0x44c 0x1>; bits = <0 6>; }; - tsens_s2_p2_backup: s2-p2_backup@44c { + tsens_s2_p2_backup: s2-p2-backup@44c { reg = <0x44c 0x2>; bits = <6 6>; }; - tsens_s3_p2_backup: s3-p2_backup@44d { + tsens_s3_p2_backup: s3-p2-backup@44d { reg = <0x44d 0x2>; bits = <4 6>; }; - tsens_s4_p2_backup: s4-p2_backup@44e { + tsens_s4_p2_backup: s4-p2-backup@44e { reg = <0x44e 0x1>; bits = <2 6>; }; @@ -1574,7 +1576,7 @@ smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,smd-edge = <0>; label = "modem"; @@ -2127,7 +2129,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-330.1", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2211,7 +2213,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; }; |