diff options
Diffstat (limited to 'arch/arm/boot/dts/r7s9210-rza2mevb.dts')
| -rw-r--r-- | arch/arm/boot/dts/r7s9210-rza2mevb.dts | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts deleted file mode 100644 index d062d02865e7..000000000000 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ /dev/null @@ -1,219 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the RZA2MEVB board - * - * Copyright (C) 2018 Renesas Electronics - * - */ - -/dts-v1/; -#include "r7s9210.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/r7s9210-pinctrl.h> - -/ { - model = "RZA2MEVB"; - compatible = "renesas,rza2mevb", "renesas,r7s9210"; - - aliases { - serial0 = &scif4; - ethernet0 = ðer0; - ethernet1 = ðer1; - }; - - chosen { - bootargs = "ignore_loglevel"; - stdout-path = "serial0:115200n8"; - }; - - keyboard { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&keyboard_pins>; - - key-3 { - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_BOTH>; - linux,code = <KEY_3>; - label = "SW3"; - wakeup-source; - }; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - - leds { - compatible = "gpio-leds"; - - red { - gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; - }; - green { - gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; - }; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x00800000>; /* HyperRAM */ - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -ðer0 { - pinctrl-names = "default"; - pinctrl-0 = <ð0_pins>; - status = "okay"; - renesas,no-ether-link; - phy-handle = <&phy0>; - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ðer1 { - pinctrl-names = "default"; - pinctrl-0 = <ð1_pins>; - status = "okay"; - renesas,no-ether-link; - phy-handle = <&phy1>; - phy1: ethernet-phy@1 { - reg = <0>; - }; -}; - -/* EXTAL */ -&extal_clk { - clock-frequency = <24000000>; /* 24MHz */ -}; - -/* High resolution System tick timers */ -&ostm0 { - status = "okay"; -}; - -&ostm1 { - status = "okay"; -}; - -&pinctrl { - eth0_pins: eth0 { - pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */ - <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */ - <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */ - <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */ - <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */ - <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */ - <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */ - <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */ - <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */ - <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */ - <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */ - }; - - eth1_pins: eth1 { - pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */ - <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */ - <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */ - <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */ - <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */ - <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */ - <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */ - <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */ - <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */ - <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */ - <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */ - }; - - keyboard_pins: keyboard { - pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */ - }; - - /* Serial Console */ - scif4_pins: serial4 { - pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ - <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ - }; - - sdhi0_pins: sdhi0 { - pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */ - <RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */ - }; - - sdhi1_pins: sdhi1 { - pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ - <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ - }; - - usb0_pins: usb0 { - pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ - <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ - <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ - }; - - usb1_pins: usb1 { - pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ - <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ - <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ - }; -}; - -/* RTC_X1 */ -&rtc_x1_clk { - clock-frequency = <32768>; -}; - -/* Serial Console */ -&scif4 { - pinctrl-names = "default"; - pinctrl-0 = <&scif4_pins>; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-names = "default"; - pinctrl-0 = <&sdhi0_pins>; - bus-width = <4>; - status = "okay"; -}; - -&sdhi1 { - pinctrl-names = "default"; - pinctrl-0 = <&sdhi1_pins>; - bus-width = <4>; - status = "okay"; -}; - -/* USB-0 as Host */ -&usb2_phy0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins>; - dr_mode = "host"; /* Requires JP3 to be fitted */ - status = "okay"; -}; - -/* USB-1 as Host */ -&usb2_phy1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; - dr_mode = "host"; - status = "okay"; -}; - -/* USB_X1 */ -&usb_x1_clk { - clock-frequency = <48000000>; -}; |