diff options
Diffstat (limited to 'arch/arm/boot/dts/r8a7794-alt.dts')
-rw-r--r-- | arch/arm/boot/dts/r8a7794-alt.dts | 488 |
1 files changed, 0 insertions, 488 deletions
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts deleted file mode 100644 index 1d22fcdc5d22..000000000000 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ /dev/null @@ -1,488 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Alt board - * - * Copyright (C) 2014 Renesas Electronics Corporation - */ - -/dts-v1/; -#include "r8a7794.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Alt"; - compatible = "renesas,alt", "renesas,r8a7794"; - - aliases { - serial0 = &scif2; - i2c9 = &gpioi2c1; - i2c10 = &gpioi2c4; - i2c11 = &i2chdmi; - i2c12 = &i2cexio4; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - d3_3v: regulator-d3-3v { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb1>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - x2_clk: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; - - x13_clk: x13-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; - - gpioi2c1: i2c-9 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - }; - - gpioi2c4: i2c-10 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - }; - - /* - * A fallback to GPIO is provided for I2C1. - */ - i2chdmi: i2c-11 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&i2c1>, <&gpioi2c1>; - i2c-bus-name = "i2c-hdmi"; - #address-cells = <1>; - #size-cells = <0>; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin0>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin0ep>; - }; - }; - }; - - eeprom@50 { - compatible = "renesas,r1ex24002", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - }; - - /* - * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). - * A fallback to GPIO is provided. - */ - i2cexio4: i2c-14 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&i2c4>, <&gpioi2c4>; - i2c-bus-name = "i2c-exio4"; - #address-cells = <1>; - #size-cells = <0>; - }; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&usbphy { - status = "okay"; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; - - ports { - port@1 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&extal_clk { - clock-frequency = <20000000>; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - du_pins: du { - groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; - function = "du1"; - }; - - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk"; - function = "scif_clk"; - }; - - ether_pins: ether { - groups = "eth_link", "eth_mdio", "eth_rmii"; - function = "eth"; - }; - - phy1_pins: phy1 { - groups = "intc_irq8"; - function = "intc"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - i2c4_pins: i2c4 { - groups = "i2c4"; - function = "i2c4"; - }; - - vin0_pins: vin0 { - groups = "vin0_data8", "vin0_clk"; - function = "vin0"; - }; - - mmcif0_pins: mmcif0 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&cmt0 { - status = "okay"; -}; - -&pfc { - qspi_pins: qspi { - groups = "qspi_ctrl", "qspi_data4"; - function = "qspi"; - }; -}; - -ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy1>; - renesas,ether-link-active-low; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <1>; - }; -}; - -&mmcif0 { - pinctrl-0 = <&mmcif0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&d3_3v>; - vqmmc-supply = <&d3_3v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "i2c-hdmi"; - - clock-frequency = <400000>; -}; - -&i2c4 { - pinctrl-0 = <&i2c4_pins>; - pinctrl-names = "i2c-exio4"; -}; - -&i2c7 { - status = "okay"; - clock-frequency = <100000>; - - pmic@58 { - compatible = "dlg,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - }; -}; - -&vin0 { - status = "okay"; - pinctrl-0 = <&vin0_pins>; - pinctrl-names = "default"; - - port { - vin0ep: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&qspi { - pinctrl-0 = <&qspi_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fl512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - spi-cpol; - spi-cpha; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "system"; - reg = <0x00040000 0x00040000>; - read-only; - }; - partition@80000 { - label = "user"; - reg = <0x00080000 0x03f80000>; - }; - }; - }; -}; |