1 files changed, 0 insertions, 115 deletions
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
deleted file mode 100644
index f420499f300a..000000000000
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Veyron Pinky Rev 2 board device tree source
- *
- * Copyright 2015 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3288-veyron-chromebook.dtsi"
-#include "cros-ec-sbs.dtsi"
-
-/ {
-	model = "Google Pinky";
-	compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
-		     "google,veyron", "rockchip,rk3288";
-
-	/delete-node/backlight-regulator;
-	/delete-node/panel-regulator;
-	/delete-node/emmc-pwrseq;
-	/delete-node/vcc18-lcd;
-};
-
-&backlight {
-	/delete-property/power-supply;
-};
-
-&emmc {
-	/*
-	 * Use a pullup instead of a drive since the output is 3.3V and
-	 * really should be 1.8V (oops).  The external pulldown will help
-	 * bring the voltage down if we only drive with a pullup here.
-	 * Therefore disable the powerseq (and actual reset) for pinky.
-	 */
-	/delete-property/mmc-pwrseq;
-	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
-};
-
-&edp {
-	/delete-property/pinctrl-names;
-	/delete-property/pinctrl-0;
-
-	force-hpd;
-};
-
-&lid_switch {
-	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
-
-	power {
-		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* Touchpad connector */
-&i2c3 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-};
-
-&panel {
-	power-supply = <&vcc33_lcd>;
-};
-
-&pinctrl {
-	/delete-node/ lcd;
-
-	backlight {
-		/delete-node/ bl_pwr_en;
-	};
-
-	buttons {
-		pwr_key_h: pwr-key-h {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	emmc {
-		emmc_reset: emmc-reset {
-			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
-			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&rk808 {
-	regulators {
-		vcc18_lcd: SWITCH_REG2 {
-			regulator-always-on;
-			regulator-boot-on;
-			regulator-name = "vcc18_lcd";
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-	};
-};
-
-&sdmmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
-		     &sdmmc_wp_gpio &sdmmc_bus4>;
-	wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
-};
-
-&tsadc {
-	/* Some connection is flaky making the tsadc hang the system */
-	status = "disabled";
-};