diff options
Diffstat (limited to 'arch/arm/boot/dts/rockchip/rv1126.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/rockchip/rv1126.dtsi | 623 |
1 files changed, 623 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi new file mode 100644 index 000000000000..bb603cae13df --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/clock/rockchip,rv1126-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rockchip,rv1126-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rv1126"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + }; + + cpu3: cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + display_subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + grf: syscon@fe000000 { + compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd"; + reg = <0xfe000000 0x20000>; + }; + + pmugrf: syscon@fe020000 { + compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd"; + reg = <0xfe020000 0x1000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rv1126-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + qos_emmc: qos@fe860000 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860000 0x20>; + }; + + qos_nandc: qos@fe860080 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860080 0x20>; + }; + + qos_sfc: qos@fe860200 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe860200 0x20>; + }; + + qos_sdio: qos@fe86c000 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe86c000 0x20>; + }; + + qos_iep: qos@fe8a0000 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe8a0000 0x20>; + }; + + qos_rga_rd: qos@fe8a0080 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe8a0080 0x20>; + }; + + qos_rga_wr: qos@fe8a0100 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe8a0100 0x20>; + }; + + qos_vop: qos@fe8a0180 { + compatible = "rockchip,rv1126-qos", "syscon"; + reg = <0xfe8a0180 0x20>; + }; + + gic: interrupt-controller@feff0000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0xfeff1000 0x1000>, + <0xfeff2000 0x2000>, + <0xfeff4000 0x2000>, + <0xfeff6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pmu: power-management@ff3e0000 { + compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd"; + reg = <0xff3e0000 0x1000>; + + power: power-controller { + compatible = "rockchip,rv1126-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RV1126_PD_NVM { + reg = <RV1126_PD_NVM>; + clocks = <&cru HCLK_EMMC>, + <&cru CLK_EMMC>, + <&cru HCLK_NANDC>, + <&cru CLK_NANDC>, + <&cru HCLK_SFC>, + <&cru HCLK_SFCXIP>, + <&cru SCLK_SFC>; + pm_qos = <&qos_emmc>, + <&qos_nandc>, + <&qos_sfc>; + #power-domain-cells = <0>; + }; + + power-domain@RV1126_PD_SDIO { + reg = <RV1126_PD_SDIO>; + clocks = <&cru HCLK_SDIO>, + <&cru CLK_SDIO>; + pm_qos = <&qos_sdio>; + #power-domain-cells = <0>; + }; + + power-domain@RV1126_PD_VO { + reg = <RV1126_PD_VO>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>, + <&cru CLK_RGA_CORE>, + <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP>, + <&cru PCLK_DSIHOST>, + <&cru ACLK_IEP>, + <&cru HCLK_IEP>, + <&cru CLK_IEP_CORE>; + pm_qos = <&qos_rga_rd>, + <&qos_rga_wr>, + <&qos_vop>, + <&qos_iep>; + #power-domain-cells = <0>; + }; + }; + }; + + i2c0: i2c@ff3f0000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff3f0000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + rockchip,grf = <&pmugrf>; + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff400000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff400000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + rockchip,grf = <&pmugrf>; + clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@ff410000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff410000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 7>, <&dmac 6>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pwm2: pwm@ff430020 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430020 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmucru: clock-controller@ff480000 { + compatible = "rockchip,rv1126-pmucru"; + reg = <0xff480000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff490000 { + compatible = "rockchip,rv1126-cru"; + reg = <0xff490000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + dmac: dma-controller@ff4e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff4e0000 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + + pwm11: pwm@ff550030 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550030 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm11m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart0: serial@ff560000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff560000 0x100>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 5>, <&dmac 4>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@ff570000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff570000 0x100>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 9>, <&dmac 8>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@ff580000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff580000 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 11>, <&dmac 10>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@ff590000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff590000 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 13>, <&dmac 12>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart5: serial@ff5a0000 { + compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; + reg = <0xff5a0000 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 15>, <&dmac 14>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5m0_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + saradc: adc@ff5e0000 { + compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc"; + reg = <0xff5e0000 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + timer0: timer@ff660000 { + compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer"; + reg = <0xff660000 0x20>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + vop: vop@ffb00000 { + compatible = "rockchip,rv1126-vop"; + reg = <0xffb00000 0x200>, <0xffb00a00 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; + reset-names = "axi", "ahb", "dclk"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + iommus = <&vop_mmu>; + power-domains = <&power RV1126_PD_VO>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_rgb: endpoint@0 { + reg = <0>; + }; + + vop_out_dsi: endpoint@1 { + reg = <1>; + }; + }; + }; + + vop_mmu: iommu@ffb00f00 { + compatible = "rockchip,iommu"; + reg = <0xffb00f00 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "iface"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + #iommu-cells = <0>; + power-domains = <&power RV1126_PD_VO>; + status = "disabled"; + }; + + gmac: ethernet@ffc40000 { + compatible = "rockchip,rv1126-gmac", "snps,dwmac-4.20a"; + reg = <0xffc40000 0x4000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + rockchip,grf = <&grf>; + clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>, + <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_REF>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>, + <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_PTPREF>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref"; + resets = <&cru SRST_GMAC_A>; + reset-names = "stmmaceth"; + + snps,mixed-burst; + snps,tso; + + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + emmc: mmc@ffc50000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc50000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + power-domains = <&power RV1126_PD_NVM>; + status = "disabled"; + }; + + sdmmc: mmc@ffc60000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc60000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + status = "disabled"; + }; + + sdio: mmc@ffc70000 { + compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0xffc70000 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + power-domains = <&power RV1126_PD_SDIO>; + status = "disabled"; + }; + + sfc: spi@ffc90000 { + compatible = "rockchip,sfc"; + reg = <0xffc90000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_SFC>; + assigned-clock-rates = <80000000>; + clock-names = "clk_sfc", "hclk_sfc"; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + power-domains = <&power RV1126_PD_NVM>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rv1126-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@ff460000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff460000 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@ff620000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff620000 0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@ff630000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff630000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@ff640000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff640000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@ff650000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff650000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rv1126-pinctrl.dtsi" |