summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/s5pv210-galaxys.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/s5pv210-galaxys.dts')
-rw-r--r--arch/arm/boot/dts/s5pv210-galaxys.dts77
1 files changed, 77 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
new file mode 100644
index 000000000000..842276749717
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+ model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
+ compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+
+ chosen {
+ stdout-path = &uart2;
+ /*
+ * It's hard to change those parameters in stock bootloader,
+ * since it requires special hardware/cable.
+ * Let's hardocde bootargs for now, till u-boot port is finished,
+ * with which it should be easier.
+ */
+ bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ nand_pwrseq: nand-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&massmemory_en>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ vol-down {
+ label = "volume_down";
+ gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "volume_up";
+ gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ home {
+ label = "home";
+ gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+ };
+};
+
+&pinctrl0 {
+ massmemory_en: massmemory-en {
+ samsung,pins = "gpj2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+};
+
+&sdhci0 {
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&nand_pwrseq>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};