diff options
Diffstat (limited to 'arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi new file mode 100644 index 000000000000..3fdd922e635c --- /dev/null +++ b/arch/arm/boot/dts/samsung/exynos3250-artik5.dtsi @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos3250 based ARTIK5 module device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's ARTIK5 module which is based on + * Samsung Exynos3250 SoC. + */ + +#include "exynos3250.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + + chosen { + stdout-path = &serial_2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x1f800000>; + }; + + firmware@205f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0205f000 0x1000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 500MHz */ + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo7_reg>; + assigned-clocks = <&cmu CLK_SCLK_TSADC>; + assigned-clock-rates = <6000000>; +}; + +&cmu { + clocks = <&xusbxti>; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; + + pmic@66 { + compatible = "samsung,s2mps14-pmic"; + interrupt-parent = <&gpx3>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps14_irq>; + reg = <0x66>; + + s2mps14_osc: clocks { + compatible = "samsung,s2mps14-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps14_ap", "unused", + "s2mps14_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + /* VDD_ALIVE15x */ + regulator-name = "VLDO1_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + /* VDDQM176 ~ VDDQM185 */ + regulator-name = "VLDO2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + /* + * VDD1_E106 ~ VDD1_E111 + * DVDD_RTC_AP, DVDD_MMC2_AP + */ + regulator-name = "VLDO3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + /* AVDD_PLL1120 ~ AVDD_PLL11201 */ + regulator-name = "VLDO4_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + /* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */ + regulator-name = "VLDO5_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + /* VDD_USB, VDD10_HSIC */ + regulator-name = "VLDO6_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + /* + * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2, + * AVDD_ADC, AVDD_ABB_0, M4S_VDD18 + */ + regulator-name = "VLDO7_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + /* AVDD33_UOTG */ + regulator-name = "VLDO8_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + /* VDDQ_E86 ~ VDDQ_E105*/ + regulator-name = "VLDO9_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VLDO10_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo11_reg: LDO11 { + /* VDD74 ~ VDD75 */ + regulator-name = "VLDO11_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo12_reg: LDO12 { + /* VDD72 ~ VDD73 */ + regulator-name = "VLDO12_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VLDO13_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VLDO14_2.7V"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VLDO_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VLDO16_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VLDO17_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo18_reg: LDO18 { + /* DVDD_MMC2_AP */ + regulator-name = "VLDO18_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VLDO19_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "VLDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "VLDO21_1.25V"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "VLDO22_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo23_reg: LDO23 { + /* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */ + regulator-name = "VLDO23_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "VLDO24_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "VLDO25_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + /* VDD_MIF */ + regulator-name = "VBUCK1_1.0V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + /* VDD_CPU */ + regulator-name = "VBUCK2_1.2V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + /* VDD_G3D */ + regulator-name = "VBUCK3_1.0V"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VBUCK4_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "VBUCK5_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + }; + }; +}; + +&mshc_0 { + non-removable; + cap-mmc-highspeed; + card-detect-delay = <200>; + vmmc-supply = <&ldo12_reg>; + clock-frequency = <100000000>; + max-frequency = <100000000>; + mmc-ddr-1_8v; + samsung,dw-mshc-ciu-div = <1>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + status = "okay"; +}; + +&mshc_1 { + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + non-removable; + keep-power-in-suspend; + fifo-depth = <0x40>; + vqmmc-supply = <&ldo11_reg>; + /* + * Voltage negotiation is broken for the SDIO periph so we + * can't actually set the voltage here. + * vmmc-supply = <&ldo23_reg>; + */ + card-detect-delay = <500>; + clock-frequency = <100000000>; + max-frequency = <100000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>; + bus-width = <4>; + status = "okay"; +}; + +&pinctrl_1 { + bten: bten-pins { + samsung,pins = "gpx1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; + + wlanen: wlanen-pins { + samsung,pins = "gpx2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>; + samsung,pin-val = <1>; + }; + + s2mps14_irq: s2mps14-irq-pins { + samsung,pins = "gpx3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + bthostwake: bthostwake-pins { + samsung,pins = "gpx3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + btwake: btwake-pins { + samsung,pins = "gpx3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&rtc { + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; + status = "okay"; +}; + +&serial_0 { + assigned-clocks = <&cmu CLK_SCLK_UART0>; + assigned-clock-rates = <100000000>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bten &btwake &bthostwake>; + max-speed = <3000000>; + shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps14_osc S2MPS11_CLK_BT>; + }; +}; + +&tmu { + status = "okay"; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; |