diff options
Diffstat (limited to 'arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 37 |
1 files changed, 33 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi index e5254e32aa8f..70e3091062f9 100644 --- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi @@ -45,6 +45,12 @@ /* Default S-BOOT bootloader loads initramfs here */ linux,initrd-start = <0x42000000>; linux,initrd-end = <0x42800000>; + + /* + * Stock bootloader provides incorrect memory size in ATAG_MEM; + * override it here + */ + linux,usable-memory-range = <0x40000000 0x3fc00000>; }; firmware@204f000 { @@ -294,12 +300,31 @@ regulator-max-microvolt = <2800000>; }; + earmic_bias_reg: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "EAR_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + sound: sound { compatible = "samsung,midas-audio"; model = "TAB3"; mic-bias-supply = <&mic_bias_reg>; submic-bias-supply = <&submic_bias_reg>; + lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + headset-mic-bias-supply = <&earmic_bias_reg>; + headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>; + headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>; + samsung,headset-4pole-threshold-microvolt = <710 2000>; + samsung,headset-button-threshold-microvolt = <0 130 260>; + io-channel-names = "headset-detect"; + io-channels = <&adc 0>; + audio-routing = "HP", "HPOUT1L", "HP", "HPOUT1R", @@ -345,6 +370,11 @@ }; }; +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + &bus_acp { devfreq = <&bus_dmc>; status = "okay"; @@ -505,12 +535,11 @@ wm1811: audio-codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clocks = <&pmu_system_controller 0>, + <&s5m8767_osc S2MPS11_CLK_BT>; + clock-names = "MCLK1", "MCLK2"; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpx3>; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; |