summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/samsung/s5pv210-aries.dtsi')
-rw-r--r--arch/arm/boot/dts/samsung/s5pv210-aries.dtsi916
1 files changed, 916 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
new file mode 100644
index 000000000000..f628d3660493
--- /dev/null
+++ b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 based Galaxy Aries board device tree source
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210.dtsi"
+
+/ {
+ compatible = "samsung,aries", "samsung,s5pv210";
+
+ aliases: aliases {
+ i2c4 = &i2c_sound;
+ i2c5 = &i2c_accel;
+ i2c6 = &i2c_pmic;
+ i2c7 = &i2c_musb;
+ i2c9 = &i2c_fuel;
+ i2c10 = &i2c_touchkey;
+ i2c11 = &i2c_prox;
+ i2c12 = &i2c_magnetometer;
+ };
+
+ memory@30000000 {
+ device_type = "memory";
+ reg = <0x30000000 0x05000000>,
+ <0x40000000 0x10000000>,
+ <0x50000000 0x08000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region@43000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x43000000 0x2000000>;
+ };
+
+ mfc_right: region@51000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x51000000 0x2000000>;
+ };
+ };
+
+ pmic_ap_clk: clock-0 {
+ /* Workaround for missing clock on PMIC */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ bt_codec: bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <0>;
+ };
+
+ vibrator_pwr: regulator-fixed-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vibrator-en";
+ enable-active-high;
+ gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_ena>;
+ };
+
+ touchkey_vdd: regulator-fixed-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VTOUCH_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_vdd_ena>;
+ };
+
+ gp2a_vled: regulator-fixed-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VLED";
+ enable-active-high;
+ gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gp2a_power>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_gpio_rst>;
+ post-power-on-delay-ms = <500>;
+ power-off-delay-us = <500>;
+ };
+
+ i2c_sound: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sound_i2c_pins>;
+
+ wm8994: audio-codec@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ #sound-dai-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&clocks MOUT_CLKOUT>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&buck3_reg>;
+ DBVDD-supply = <&buck3_reg>;
+ CPVDD-supply = <&buck3_reg>;
+ SPKVDD1-supply = <&buck3_reg>;
+ SPKVDD2-supply = <&buck3_reg>;
+
+ wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
+ 0xa101 0x0100 0x8100 0x0100 0x0100
+ 0x0100>;
+
+ wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+
+ wlf,lineout1-se;
+ wlf,lineout2-se;
+
+ assigned-clocks = <&clocks MOUT_CLKOUT>;
+ assigned-clock-rates = <0>;
+ assigned-clock-parents = <&xusbxti>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&codec_ldo>;
+ };
+ };
+
+ i2c_accel: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_i2c_pins>;
+
+ accelerometer@38 {
+ compatible = "bosch,bma023";
+ reg = <0x38>;
+
+ vdd-supply = <&ldo9_reg>;
+ vddio-supply = <&ldo9_reg>;
+ };
+ };
+
+ i2c_pmic: i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_i2c_pins>;
+
+ pmic@66 {
+ compatible = "maxim,max8998";
+ reg = <0x66>;
+ interrupt-parent = <&gph0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ max8998,pmic-buck1-default-dvs-idx = <1>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+ <&gph0 4 GPIO_ACTIVE_HIGH>;
+ max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
+ <1050000>, <950000>;
+
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+ max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VLCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_AF_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VGA_VDDIO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VGA_DVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_ISP_HOST_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VGA_AVDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_3.0V_LCD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1250000>;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vddint";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1100000>;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
+
+ cp32khz_reg: EN32KHz-CP {
+ regulator-name = "32KHz CP";
+ };
+
+ vichg_reg: ENVICHG {
+ regulator-name = "VICHG";
+ regulator-always-on;
+ };
+
+ safe1_sreg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ };
+
+ safe2_sreg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ };
+ };
+ };
+ };
+
+ i2c_musb: i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&musb_i2c_pins>;
+
+ fsa9480: musb@25 {
+ compatible = "fcs,fsa9480";
+ reg = <0x25>;
+ interrupt-parent = <&gph2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&musb_irq>;
+ };
+ };
+
+ i2c_fuel: i2c-gpio-4 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fg_i2c_pins>;
+
+ fg: fuelgauge@36 {
+ compatible = "maxim,max17040";
+ reg = <0x36>;
+ };
+ };
+
+ i2c_touchkey: i2c-gpio-5 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_i2c_pins>;
+
+ touchkey@20 {
+ compatible = "cypress,aries-touchkey";
+ reg = <0x20>;
+ vdd-supply = <&touchkey_vdd>;
+ vcc-supply = <&buck3_reg>;
+ linux,keycodes = <KEY_MENU KEY_BACK
+ KEY_HOMEPAGE KEY_SEARCH>;
+ interrupt-parent = <&gpj4>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_irq>;
+ };
+ };
+
+ i2c_prox: i2c-gpio-6 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_i2c_pins>;
+
+ light-sensor@44 {
+ compatible = "sharp,gp2ap002a00f";
+ reg = <0x44>;
+ interrupt-parent = <&gph0>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&gp2a_vled>;
+ vio-supply = <&gp2a_vled>;
+ io-channels = <&gp2a_shunt>;
+ io-channel-names = "alsout";
+ sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+ sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gp2a_irq>;
+ };
+ };
+
+ i2c_magnetometer: i2c-gpio-7 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&magnetometer_i2c_pins>;
+
+ status = "disabled";
+
+ /* Yamaha yas529 magnetometer, no mainline binding */
+ };
+
+ vibrator: pwm-vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 1 44642 0>;
+ pwm-names = "enable";
+ vcc-supply = <&vibrator_pwr>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_out>;
+ };
+
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_syscon>;
+ offset = <0x681c>; /* PS_HOLD_CONTROL */
+ value = <0x5200>;
+ };
+
+ spi_lcd: spi-2 {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_spi_pins>;
+
+ panel@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
+ vdd3-supply = <&ldo7_reg>;
+ vci-supply = <&ldo17_reg>;
+ spi-max-frequency = <1200000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_rst>;
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_ep>;
+ };
+ };
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo4_reg>;
+
+ status = "okay";
+
+ gp2a_shunt: current-sense-shunt {
+ compatible = "current-sense-shunt";
+ io-channels = <&adc 9>;
+ shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
+ #io-channel-cells = <0>;
+ };
+};
+
+&fimd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_clk &lcd_data24>;
+ status = "okay";
+
+ samsung,invert-vden;
+ samsung,invert-vclk;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@3 {
+ reg = <3>;
+ fimd_ep: endpoint {
+ remote-endpoint = <&lcd_ep>;
+ };
+ };
+};
+
+&hsotg {
+ vusb_a-supply = <&ldo8_reg>;
+ vusb_d-supply = <&ldo3_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&i2c2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ samsung,i2c-slave-addr = <0x10>;
+ status = "okay";
+
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpj0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_irq>;
+ reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2s0 {
+ dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
+ status = "okay";
+};
+
+&mfc {
+ memory-region = <&mfc_left>, <&mfc_right>;
+};
+
+&pinctrl0 {
+ bt_reset: bt-reset-pins {
+ samsung,pins = "gpb-3";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ wlan_bt_en: wlan-bt-en-pins {
+ samsung,pins = "gpb-5";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-val = <1>;
+ };
+
+ codec_ldo: codec-ldo-pins {
+ samsung,pins = "gpf3-4";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ };
+
+ prox_i2c_pins: gp2a-i2c-pins {
+ samsung,pins = "gpg0-2", "gpg2-2";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ wlan_gpio_rst: wlan-gpio-rst-pins {
+ samsung,pins = "gpg1-2";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ };
+
+ bt_wake: bt-wake-pins {
+ samsung,pins = "gpg3-4";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ };
+
+ gp2a_irq: gp2a-irq-pins {
+ samsung,pins = "gph0-2";
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ pmic_dvs_pins: pmic-dvs-pins {
+ samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ samsung,pin-val = <0>;
+ };
+
+ pmic_irq: pmic-irq-pins {
+ samsung,pins = "gph0-7";
+ samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ wifi_host_wake: wifi-host-wake-pins {
+ samsung,pins = "gph2-4";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ bt_host_wake: bt-host-wake-pins {
+ samsung,pins = "gph2-5";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ musb_irq: musq-irq-pins {
+ samsung,pins = "gph2-7";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ tf_detect: tf-detect-pins {
+ samsung,pins = "gph3-4";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ wifi_wake: wifi-wake-pins {
+ samsung,pins = "gph3-5";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ };
+
+ magnetometer_i2c_pins: yas529-i2c-pins {
+ samsung,pins = "gpj0-0", "gpj0-1";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ ts_irq: ts-irq-pins {
+ samsung,pins = "gpj0-5";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ vibrator_ena: vibrator-ena-pins {
+ samsung,pins = "gpj1-1";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ gp2a_power: gp2a-power-pins {
+ samsung,pins = "gpj1-4";
+ samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ touchkey_i2c_pins: touchkey-i2c-pins {
+ samsung,pins = "gpj3-0", "gpj3-1";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ touchkey_vdd_ena: touchkey-vdd-ena-pins {
+ samsung,pins = "gpj3-2";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ musb_i2c_pins: musb-i2c-pins {
+ samsung,pins = "gpj3-4", "gpj3-5";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ accel_i2c_pins: accel-i2c-pins {
+ samsung,pins = "gpj3-6", "gpj3-7";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ pmic_i2c_pins: pmic-i2c-pins {
+ samsung,pins = "gpj4-0", "gpj4-3";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ touchkey_irq: touchkey-irq-pins {
+ samsung,pins = "gpj4-1";
+ samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ lcd_spi_pins: spi-lcd-pins {
+ samsung,pins = "mp01-1", "mp04-1", "mp04-3";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ fg_i2c_pins: fg-i2c-pins {
+ samsung,pins = "mp05-0", "mp05-1";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ sound_i2c_pins: sound-i2c-pins {
+ samsung,pins = "mp05-2", "mp05-3";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+
+ panel_rst: panel-rst-pins {
+ samsung,pins = "mp05-5";
+ samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+ samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+ };
+};
+
+&pwm {
+ samsung,pwm-outputs = <1>;
+};
+
+&rtc {
+ clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sdhci1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ max-frequency = <38400000>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
+ pinctrl-names = "default";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ keep-power-in-suspend;
+
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
+ assigned-clock-rates = <0>, <50000000>;
+ assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+ wlan@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gph2>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&ldo5_reg>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
+ assigned-clock-rates = <0>, <50000000>;
+ assigned-clock-parents = <&clocks MOUT_MPLL>;
+};
+
+&uart0 {
+ assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
+ assigned-clock-rates = <0>, <111166667>;
+ assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4329-bt";
+ max-speed = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
+ &bt_reset &bt_wake>;
+ shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gph2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+ vbus-supply = <&safe1_sreg>;
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};