summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/st/spear1340.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/st/spear1340.dtsi')
-rw-r--r--arch/arm/boot/dts/st/spear1340.dtsi167
1 files changed, 167 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/spear1340.dtsi b/arch/arm/boot/dts/st/spear1340.dtsi
new file mode 100644
index 000000000000..818886e11713
--- /dev/null
+++ b/arch/arm/boot/dts/st/spear1340.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1340";
+
+ ahb {
+
+ spics: spics@e0700000{
+ compatible = "st,spear-spics-gpio";
+ reg = <0xe0700000 0x1000>;
+ st-spics,peripcfg-reg = <0x42c>;
+ st-spics,sw-enable-bit = <21>;
+ st-spics,cs-value-bit = <20>;
+ st-spics,cs-enable-mask = <3>;
+ st-spics,cs-enable-shift = <18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ miphy0: miphy@eb800000 {
+ compatible = "st,spear1340-miphy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ahci0: ahci@b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 72 0x4>;
+ phys = <&miphy0 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ pcie0: pcie@b1000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+ reg-names = "dbi", "config";
+ interrupts = <0 68 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy0 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+ };
+
+ i2s-play@b2400000 {
+ compatible = "snps,designware-i2s";
+ reg = <0xb2400000 0x10000>;
+ interrupt-names = "play_irq";
+ interrupts = <0 98 0x4
+ 0 99 0x4>;
+ play;
+ channel = <8>;
+ status = "disabled";
+ };
+
+ i2s-rec@b2000000 {
+ compatible = "snps,designware-i2s";
+ reg = <0xb2000000 0x10000>;
+ interrupt-names = "record_irq";
+ interrupts = <0 100 0x4
+ 0 101 0x4>;
+ record;
+ channel = <8>;
+ status = "disabled";
+ };
+
+ pinmux: pinmux@e0700000 {
+ compatible = "st,spear1340-pinmux";
+ reg = <0xe0700000 0x1000>;
+ #gpio-range-cells = <3>;
+ };
+
+ pwm: pwm@e0180000 {
+ compatible = "st,spear13xx-pwm";
+ reg = <0xe0180000 0x1000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ spdif-in@d0100000 {
+ compatible = "st,spdif-in";
+ reg = < 0xd0100000 0x20000
+ 0xd0110000 0x10000 >;
+ interrupts = <0 84 0x4>;
+ status = "disabled";
+ };
+
+ spdif-out@d0000000 {
+ compatible = "st,spdif-out";
+ reg = <0xd0000000 0x20000>;
+ interrupts = <0 85 0x4>;
+ status = "disabled";
+ };
+
+ spi1: spi@5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+
+ apb {
+ i2c1: i2c@b4000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xb4000000 0x1000>;
+ interrupts = <0 104 0x4>;
+ write-16bit;
+ status = "disabled";
+ };
+
+ serial@b4100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xb4100000 0x1000>;
+ interrupts = <0 105 0x4>;
+ status = "disabled";
+ dmas = <&dwdma0 13 0 1>,
+ <&dwdma0 12 1 0>;
+ dma-names = "rx", "tx";
+ };
+
+ thermal@e07008c4 {
+ st,thermal-flags = <0x2a00>;
+ };
+
+ gpiopinctrl: gpio@e2800000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xe2800000 0x1000>;
+ interrupts = <0 107 0x4>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 0 252>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <250>;
+ st-plgpio,wdata-reg = <0x40>;
+ st-plgpio,dir-reg = <0x00>;
+ st-plgpio,ie-reg = <0x80>;
+ st-plgpio,rdata-reg = <0x20>;
+ st-plgpio,mis-reg = <0xa0>;
+ st-plgpio,eit-reg = <0x60>;
+ };
+ };
+ };
+};