diff options
Diffstat (limited to 'arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts')
| -rw-r--r-- | arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts | 27 |
1 files changed, 16 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index 2355ca6e9ad6..40b0d92dfb15 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -451,13 +451,17 @@ no-sdio; no-sd; vmmc-supply = <&ldo_3v3_reg>; + vqmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; /* - * GPIO130 will be set to input no pull-up resulting in a resistor - * pulling the reset high and taking the memory out of reset. + * This muxing excludes the feedback clock on GPIO130 + * which is instead used for reset of the eMMC. + * GPIO130 will be set to input no pull-up resulting in + * a resistor pulling the reset high and taking the + * memory out of reset. */ - pinctrl-0 = <&mc2_a_1_default>; - pinctrl-1 = <&mc2_a_1_sleep>; + pinctrl-0 = <&mc2_a_2_default>; + pinctrl-1 = <&mc2_a_2_sleep>; status = "okay"; }; @@ -644,6 +648,7 @@ touchscreen-size-y = <800>; pinctrl-names = "default"; pinctrl-0 = <&tsp_default>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; }; }; @@ -677,14 +682,14 @@ sdi2 { /* * This will make the resistor mounted in R0.0 pull up - * the reset line and take the eMMC out of reset. On - * R0.4 variants, GPIO130 should be set in GPIO mode and - * pulled down. (Not connected.) + * the reset line and take the eMMC out of reset so set to + * GPIO input mode, no pull-up. On R0.4 variants, GPIO130 + * could be set in GPIO mode and pulled down. (Not connected.) */ - mc2_a_1_default { - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; + mc2_a_2_default { + default_cfg3 { + pins = "GPIO130_C8"; /* RST_N */ + ste,config = <&gpio_in_nopull>; }; }; }; |