diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi | 573 |
1 files changed, 573 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi new file mode 100644 index 000000000000..bf0c32027baf --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -0,0 +1,573 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2022-2023 Steffen Trumtrar <kernel@pengutronix.de> + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved + * Author: Dom VOVARD <dom.vovard@linrt.com>. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "stm32mp15-pinctrl.dtsi" + +/ { + model = "PHYTEC phyCORE-STM32MP15 SOM"; + compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + rtc0 = &i2c4_rtc; + rtc1 = &rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-home { + label = "Home"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + key-enter { + label = "Enter"; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-PHYCORE"; + routing = + "Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */ + "Capture", "MCLK"; + dais = <&sai2b_port>, + <&sai2a_port>; + }; + + regulator_vin: regulator { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rgmii_pins_d>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_d>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_b>; + pinctrl-1 = <&i2c1_sleep_pins_b>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + + codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + + ai3x-micbias-vg = <2>; + + AVDD-supply = <&v3v3>; + IOVDD-supply = <&v3v3>; + DRVDD-supply = <&v3v3>; + DVDD-supply = <&v1v8_audio>; + + clocks = <&sai2b>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tlv320_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + + tlv320_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; + + touch@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + vio-supply = <&v3v3>; + vcc-supply = <&v3v3>; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + type = <PCA9532_TYPE_LED>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + compatible = "st,stpmic1-regulators"; + buck1-supply = <®ulator_vin>; + buck2-supply = <®ulator_vin>; + buck3-supply = <®ulator_vin>; + buck4-supply = <®ulator_vin>; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo4-supply = <®ulator_vin>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + boost-supply = <®ulator_vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + + }; + + vdd_eth_2v5: ldo2 { + regulator-name = "dd_eth_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + vdd_eth_1v0: ldo6 { + regulator-name = "vdd_eth_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + regulator-active-discharge = <1>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, + <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", + "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + }; + + i2c4_eeprom: eeprom@50 { + compatible = "microchip,24c32", + "atmel,24c32"; + reg = <0x50>; + }; + + i2c4_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m_can2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + status = "okay"; + + flash0: flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + m25p,fast-read; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>; + pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>; + status = "okay"; +}; + +&sai2a { + dma-names = "rx"; + st,sync = <&sai2b 2>; + clocks = <&rcc SAI2_K>, <&sai2b>; + clock-names = "sai_ck", "MCLK"; + #clock-cells = <0>; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&tlv320_rx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sai2b { + dma-names = "tx"; + #clock-cells = <0>; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&tlv320_tx_endpoint>; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_b>; + pinctrl-1 = <&sdmmc1_b4_od_pins_b>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>; + cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; +}; + +&spi1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_a>; + pinctrl-1 = <&spi1_sleep_pins_a>; + cs-gpios = <&gpioz 3 0>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + pinctrl-3 = <&uart4_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b &usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_a>; + pinctrl-1 = <&usart3_sleep_pins_a>; + pinctrl-2 = <&usart3_idle_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + status = "okay"; +}; + +&usbh_ohci { + status = "okay"; +}; + +&usbotg_hs { + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; |