diff options
Diffstat (limited to 'arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi | 119 |
1 files changed, 17 insertions, 102 deletions
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index fc3a2386dbb9..be0c355d3105 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -16,12 +16,20 @@ / { aliases { + can0 = &m_can1; + can1 = &m_can2; ethernet0 = ðernet0; ethernet1 = &port_uplink; ethernet2 = &port_dut; + i2c0 = &i2c1; + i2c1 = &i2c4; + i2c2 = &i2c5; mmc1 = &sdmmc2; serial0 = &uart4; serial1 = &usart3; + spi0 = &spi2; + spi1 = &spi4; + spi2 = &spi5; }; chosen { @@ -142,76 +150,6 @@ baseboard_eeprom: &sip_eeprom { }; -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc1_ain_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdda>; - vref-supply = <&vrefbuf>; - status = "okay"; - - adc1: adc@0 { - st,adc-channels = <0 1 2 5 9 10 13 15>; - st,min-sample-time-nsecs = <5000>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - channel@0 { - reg = <0>; - label = "HOST_2_CURR_FB"; - }; - - channel@1 { - reg = <1>; - label = "HOST_3_CURR_FB"; - }; - - channel@2 { - reg = <2>; - label = "OUT_0_FB"; - }; - - channel@5 { - reg = <5>; - label = "IOBUS_CURR_FB"; - }; - - channel@9 { - reg = <9>; - label = "IOBUS_VOLT_FB"; - }; - - channel@10 { - reg = <10>; - label = "OUT_1_FB"; - }; - - channel@13 { - reg = <13>; - label = "HOST_CURR_FB"; - }; - - channel@15 { - reg = <15>; - label = "HOST_1_CURR_FB"; - }; - }; - - adc2: adc@100 { - st,adc-channels = <12>; - st,min-sample-time-nsecs = <500000>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - channel@12 { - reg = <12>; - label = "TEMP_INTERNAL"; - }; - }; -}; - &crc1 { status = "okay"; }; @@ -265,13 +203,6 @@ baseboard_eeprom: &sip_eeprom { "ETH_LAB_LEDRN"; /* 15 */ }; -&gpioe { - gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */ - "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */ - "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */ - "TP27"; /* 15 */ -}; - &gpiof { gpio-line-names = "TP36", "TP37", "", "", "OLED_CS", /* 0 */ "", "", "", "", "", /* 5 */ @@ -279,13 +210,6 @@ baseboard_eeprom: &sip_eeprom { ""; /* 15 */ }; -&gpiog { - gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */ - "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */ - "TP49", "", "", "", "", /* 10 */ - ""; /* 15 */ -}; - &gpioh { gpio-line-names = "", "", "OUT_1", "OUT_0", "OLED_RESET", /* 0 */ "", "", "", "", "", /* 5 */ @@ -379,15 +303,6 @@ baseboard_eeprom: &sip_eeprom { }; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rtc { - status = "okay"; -}; - &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; @@ -409,7 +324,7 @@ baseboard_eeprom: &sip_eeprom { &spi2 { pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_c>; - cs-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpiof 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -471,6 +386,10 @@ baseboard_eeprom: &sip_eeprom { interrupt-parent = <&gpioa>; interrupts = <6 IRQ_TYPE_EDGE_RISING>; + /* Reduce RGMII EMI emissions by reducing drive strength */ + microchip,hi-drive-strength-microamp = <2000>; + microchip,lo-drive-strength-microamp = <8000>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -577,6 +496,10 @@ baseboard_eeprom: &sip_eeprom { vusb_d-supply = <&vdd_usb>; vusb_a-supply = <®18>; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 16 16 16 16 16>; + dr_mode = "peripheral"; status = "okay"; @@ -586,14 +509,6 @@ baseboard_eeprom: &sip_eeprom { status = "okay"; }; -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - &vrefbuf { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; |